DM87 industrial relays DM87N sensitive • Cadmium - free contacts • Height 15,7 mm • 5000 V / 10 mm reinforced insulation • For PCB and plug-in sockets • Accessories: sockets and modules • AC and DC coils - standard (DM87N, DM87L, DM87P), DC coils - sensitive (DM87N sensitive) • Recyclable packing • Recognitions, certificates, directives: RoHS, VDE R Contacts Contact number & arrangement Contact material Max. switching voltage Min. switching voltage Rated load AC/DC AC1 DC1 Min. switching current Max. inrush current Rated current Max. breaking capacity Min. breaking capacity Resistance Max. operating frequency • at rated load • no load AC1 AC1 Coil Rated voltage 50/60 Hz AC DC Must release voltage Operating range of supply voltage Rated power consumption AC DC Insulation Insulation category Insulation rated voltage Rated surge voltage Overvoltage category Insulation pollution degree Dielectric strength • coil - contact • contact - contact Contact - coil distance • clearance • creepage 600 cycles/hour 72 000 cycles/hour 12...240 V standard version 3...110 V standard version 5...48 V AC: ≥ 0.15 Un DC: ≥ 0.1 Un see Tables 1, 3 and Fig. 5, 7 standard version see Table 2 and Fig. 6 sensitive version 0,75 VA standard version 0.4...0.48 W standard version 0.25 W sensitive version 5 000 V AC 1 000 V AC ≥ 10 mm ≥ 10 mm 7 ms 3 ms • storage • operating Cover protection category Environmental protection Shock resistance Vibration resistance Solder bath temperature Soldering time > 105 12 A, 250 V AC standard version > 1,7 x 105 10 A, 250 V AC sensitive version see Fig. 2 > 105 0,15 A, 220 V DC > 3 x 107 29 x 12.7 x 15.7 mm 14 g -40...+85 oC AC: -40...+70 oC DC: -40...+85 oC IP 40 or IP 67 RTII IEC 61810-7 30 g 10 g 10...150 Hz max. 270 oC max. 5 s Standard contact materials are marked with bold type. Page 1 of 5 sensitive version C250 / B400 400 V AC 4 000 V AC III IEC 61810-5 (PN-IEC 664-1) 3 General data Operating time (typical value) Release time (typical value) Electrical life • resistive AC1 • cosφ • L/R=40 ms Mechanical life (cycles) Dimensions (L x W x H) Weight Ambient temperature 1C/O, 1NO AgNi, AgNi/Au 5 um, AgSnO2 400 V / 300 V 5 V AgNi, 5 V AgNi/Au 5 um, 10 V AgSnO2 12 A / 250 V AC standard version 10 A / 250 V AC sensitive version 12 A / 24 V DC standard version 10 A / 24 V DC sensitive version 5 mA AgNi, 2 mA AgNi/Au 5 um, 10 mA AgSnO2 25 A AgSnO2 standard version 20 A AgSnO2 sensitive version 12 A standard version 10 A sensitive version 3 000 VA standard version 2 500 VA sensitive version 0.3 W AgNi, 0.05 W AgNi/Au 5 um, 1 W AgSnO2 ≤ 100 mΩ www.aecsensors.com Sales Department Tel: (888) 847-6552 DM87 industrial relays Table 1 Coil data - standard DC voltage version Coil resistance ±10% at 20 °C Ω Rated voltage V DC Coil code 1003 1005 1006 1009 1012 1018 1024 1036 1048 1060 1110 3 5 6 9 12 18 24 36 48 60 110 22 60 90 200 360 710 1 440 3 140 5 700 7 500 25 200 Coil operating range at 20 °C V DC min. 2.1 3.5 4.2 6.3 8.4 12.6 16.8 25.2 33.6 42.0 77.0 max. 7.6 12.7 15.3 22.9 30.6 45.9 61.2 91.8 122.4 153.0 280.0 Standard coil rated voltages marked with bold type. Table 2 Coil data - sensitive DC voltage version (only for DM87N) S005 S006 S009 S010 S012 S018 S024 S048 102 144 330 400 580 1 300 2 300 9 340 5 6 9 10 12 18 24 48 3.75 4.50 6.75 7.50 9.00 13.50 18.00 36.00 Table 3 Coil data - AC 50/60 Hz voltage version Coil code 5012 5024 5048 5060 5110 5115 5120 5220 5230 5240 Rated voltage V AC 12 24 48 60 110 115 120 220 230 240 Coil resistance at 20 °C Ω 100 400 1 550 2 600 8 900 9 600 10 200 35 500 38 500 42 500 Acceptable resistance ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±15% Coil operating range at 20 °C V AC - 50 Hz min. max. 9.6 19.2 38.4 48.0 88.0 92.0 96.0 176.0 184.0 192.0 13.2 28.8 57.6 72.0 132.0 138.0 144.0 264.0 276.0 288.0 Standard coil rated voltages marked with bold type. Page 2 of 5 www.aecsensors.com 15.0 18.0 27.0 30.0 36.0 54.0 72.0 144.0 Sales Department Tel: (888) 847-6552 DM87 industrial relays Connections diagram (pin side view) Dimensions DM87N, DM87N sensitive 7.5 14 (5) 11 (4) 14 (5) 11 (4) 14 (5) 11 (4) 12 (3) 12 (3) 16.5 3.5 3.5 7.5 DM87L 5 14 (5) 11 (4) 5 15 A1 (1) A2 (2) A1 (1) A2 (2) A1 (1) A2 (2) DM87N 1C/O DM87N 1NO DM87N sensitive 1C/O 14 (5) DM87P DM87N sensitive 1NO 14 (5) 14 (5) 11 (4) A1 (1) A2 (2) 14 (5) 11 (4) 11 (4) 11 (4) 12 (3) 7.5 12 (3) 5 5 A1 (1) A2 (2) A1 (1) A2 (2) A1 (1) A2 (2) A1 (1) A2 (2) DM87L 1C/O DM87L 1NO DM87P 1C/O DM87P 1NO 15 29 Terminal (pin) A1(1); A2(2) 15.7 [mm] Ø 0.6 Drilling hole: • for relays • for sockets Fig. 1 12(3); 11(4); 14(5) 0.5 x 0.9 Ø 1.3 + 0.1 mm Ø 1.5 + 0.1 mm Electrical life reduction factor at AC inductive load Fig. 2 1.0 Reduction factor 0.9 0.8 0.7 0.6 0.5 0.4 0.3 1.0 0.9 0.8 0.7 0.6 0.5 0.4 Power factor 0 Page 3 of 5 0.4 0.8 1.2 1.6 www.aecsensors.com 2.0 2.4 2.8 3.0 Sales Department Tel: (888) 847-6552 0.3 0.2 DM87 industrial relays Max. DC resistive load breaking capacity - standard version Fig. 3 Max. DC resistive load breaking capacity - sensitive version 50 50 DC current [A] 12 10 DC current [A] Fig. 4 5 10 8 5 2 2 1 1 0.5 0.5 0.1 10 20 30 40 50 100 200 0.1 10 300 20 30 40 50 DC voltage [V] Coil operating range - DC - standard version Fig. 5 100 200 DC voltage [V] Coil operating range - DC - sensitive version 3.0 300 Fig. 6 3.0 2.8 2.8 n n n 2.6 n 2.6 2.4 2.4 2.2 2.2 2.0 2.0 1.8 1.8 1.6 1.6 1.4 1.4 1.2 1.2 1.0 1.0 0.8 0.8 0.6 0.6 0 10 20 30 40 50 60 70 80 90 100 Coil operating range - AC 50 Hz Fig. 7 n 1.6 1.4 1.2 1.0 0.8 Page 4 of 5 10 20 30 40 50 60 70 80 90 100 Description of Fig. 5, 6 and 7 A - relations between make voltage and ambient temperature at no load on contacts. Coil temperature and ambient temperature are equal before coil energizing. Make voltage is not higher than the value read on Y axis (multiplication of rated voltage). B - relations between make voltage and ambient temperature after initial coil heating up with 1,1 Un, at continues load of In on contacts. Make voltage is not higher than the value read on Y axis (multiplication of rated voltage). 1, 2, 3 - values on Y axis represent allowed overvoltage on coil at certain ambient temperature and contact load: 1 - no load 2 - 50% of rated load 3 - rated load 1.8 0.6 0 0 10 20 30 40 50 60 www.aecsensors.com 70 80 90 100 Sales Department Tel: (888) 847-6552 DM87 industrial relays Mounting openings raster (solder side view) 3.5 3.5 Mounting Relays DM87N, DM87N sensitive are designed for: • direct PCB mounting • screw terminals plug-in sockets DZT92 and DZM92 with clip DZT80-0040, 35 mm DIN rail mount, EN 50022 or on panel mounting. Signalling / protecting modules type DM... are available with sockets (see page 240) • plug-in sockets for PCB mounting DC35 with clip DH16-2. 16.5 DM87N 1C/O DM87N sensitive 1C/O 5 × Ø 1.3 2.5 × 2.5 5 5 15 Relays DM87L, DM87P are designed for: • direct PCB mounting • screw terminals plug-in sockets DZT80 and DZM80 with clip DZT80-0040, 35 mm DIN rail mount, EN 50022 or on panel mounting. Signalling / protecting modules type DM... are available with sockets • plug-in sockets for PCB mounting DW80 and DC50 with clip DH16-2. DM87L 1C/O 5 × Ø 1.3 2.5 × 2.5 5 5 15 DM87P 1C/O 5 × Ø 1.3 2.5 × 2.5 Ordering codes Cover protection category Type Type of raster Contact material Contact number & arrangement Connection mode Coil code D M 8 7 Type of raster - standard version N - 3.5 mm raster L - 5.0 mm left raster P - 5.0 mm right raster see Tables 1, 2, 3 Type of raster - sensitive version N - 3.5 mm raster Contact material 20 - AgNi 23 - AgNi/Au 5 um 30 - AgSnO2 Contact number & arrangement 11 - 1C/O 21 - 1NO Cover protection category 2 - in cover, IP 40 version 3 - in cover, IP 67 waterproof version Connection mode 5 - for PCB and sockets Examples of ordering codes: DM87N - 2011 - 25 - 1012 relay DM87, 3,5 mm raster, contact material AgNi, with one changeover contact, in cover IP 40, for PCB and sockets, voltage version 12 V DC American Electronic Components, Inc. 1101 Lafayette Street, Elkhart, IN 46516 Page 5 of 5 www.aecsensors.com Sales Department Tel: (888) 847-6552