Power Capacitor Discharge Reactor Accessories B44066E9900S001 Preliminary data Characteristics Fast discharge for fast reconnection of PFC capacitors Reduced losses Shockproof case for rail mounting Technical data Weight 0.5 kg Dimensions 90 mm x 45 mm x 59 mm Case shockproof Voltage 230 to 525 V Frequency 50/60 Hz Internal configuration 2 winding in V arrangement Resistance 4 900 Ω Discharge time 230 V up to 25 kvar < 10 s up to 50 kvar < 20 s up to 100 kvar < 40 s 400 ... 525 V up to 25 kvar < 5 s up to 50 kvar < 10 s up to 100 kvar < 20 s Power loss < 1.8 W Free wheeling current < 4.5 mA Accepted discharge number 1 x / (minute and 100 kvar) Temperature class ta = 40°C/B Cable diameter 0.75 ... 2 x 2.5 mm2 Terminals fixing torque: 0.5 Nm Installation location indoor Degree of protection IP40 Ambient temperature -25 ... +55 °C Cooling natural FK PM PFC August 2004 Page 1 of 2 Power Capacitor Discharge Reactor Accessories B44066E9900S001 Preliminary data Dimensional drawings 6 Please read information about PFC capacitors and accessories and cautions as well as installation and maintenance instructions (Power Factor Correction Product Profile, actual version) to ensure optimum performance and prevent products from failing, and in worst case, bursting and fire, etc. Information given in the PFC-product profile and values given in the data sheet reflect typical specifications. You are kindly requested to approve our product specifications or request our approval for your specification before ordering. EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. FK PM PFC August 2004 Page 2 of 2