AMR4 SERIES AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT FEATURES ‧UNIVERSAL INPUT 90~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧LOW PROFILE FOR BUILDING AUTOMATION ‧3 YEARS WARRANTY R R R H H H Class I, Div 2 MODEL LIST a UL 60950-1 UL 1310 IND. CONT. EQ. UL 508 EN 60950-1 OUTPUT CURRENT EFF. (min.) EFF. (typ.) + 5 VDC 7000 mA 78% 80% 54 WATTS + 12 VDC 4500 mA 82% 84% 60 WATTS + 15 VDC 4000 mA 83% 85% 60 WATTS + 24 VDC 2500 mA 84% 86% MODEL NO. INPUT VOLTAGE AMR4-05 90~264 VAC 35 WATTS AMR4-12 90~264 VAC AMR4-15 90~264 VAC AMR4-24 90~264 VAC OUTPUT OUTPUT WATTAGE VOLTAGE Single Output Models SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Vi nom, Io nom Input-Output Isolation resistance Ambient temperature Input-Output, @ 500VDC Operating at Vi nom Derating (see derating curve) Storage temperature Relative humidity 45 3,000/4,242 o KHz VAC / VDC MΩ + 71 -40 -40 + 85 Vi nom, Io nom 20 95 Vi nom, Io min Bellcore Issue 6 @40 oC, GB 2.5 ± 0.03 o C % / oC o C % RH % / oC 5V 672,000 Hours 12V 15V 647,000 650,000 662,000 Hours 24V Installation position Pollution degree unit 55 Vi nom, from +56 C to +71 C Non operational MTBF Dimension Cooling max. 100 o Temperature coefficient Altitude during operation typ. min. Conditions Switching frequency Isolation voltage Hours IEC 60068-2-13 4,850 Hours m mm L91 x W71x D56.5 Free air convection Vertical ( other direction may derating using ) 2 INPUT SPECIFICATIONS Characteristics Io nom Ta min ... Ta max, Io nom Input current Vi : 115 / 230 VAC, Io nom Rated input current Vi : 90 VAC, Io nom Line frequency Vi nom, Io nom Inrush current Power dissipation Vi : 115 / 230 VAC , Io nom www.chinfa.com 2014.08.11 min. Conditions Rated input voltage Absolute input max. range Vi : 230 VAC, Io nom AC in DC in 5V 12V, 15V, 24V typ. 100 90 120 max. unit 240 264 VAC VAC 375 VDC 0.7 / 0.43 A 1.1 / 0.6 5V 12V, 15V, 24V A 1.0 47 5V 8.8 12V 10.2 A 1.5 A 63 30 / 60 Hz A W W [email protected] P1 AMR4 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Power dissipation Leakage current min. Conditions Vi : 230 VAC, Io nom typ. 15V 10 24V 9.9 max. unit W W Input-Output 0.25 mA max. unit +1 % OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max 0 Load regulation Vi nom, Io min ...Io nom Vi nom, 0.8 Io nom Voltage trim range Rated continuous loading Vi nom, Turn on time Rise time Vi nom, Io nom Vi nom, Io nom Vi nom, Io nom Vi nom, Io nom % VDC 5V 5 12V 15V 12 13.5 14 16.5 24V 5V 24 % VDC VDC 28 7A @ 5VDC / 6.3A @ 5.5VDC VDC 4.5A @ 12VDC / 3.8A @ 14VDC 4A @ 15VDC / 3.6A @ 16.5VDC 2.5A @ 24VDC / 2.1A @ 28VDC 24V Vi : 115 / 230 VAC, Io nom % ±1 ±1 5.5 12V 15V Hold up time typ. 5V, 12V 16 / 60 15V, 24V 12 / 60 ms ms with 3500μF CAP with 3500μF CAP 1,000 ms 1,500 ms 150 ms 500 ms Fall time Transient recovery time Vi nom, Io nom 150 ms Vi nom, 1~0.5 Io nom Vi nom, Io nom, BW = 20MHz 2 50 ms Ripple & noise Power back immunity Vi nom, Io nom 7.5 VDC 12V 15V 18 VDC 22 35 VDC 24V Capacitor load Vi nom, Io nom DC ON indicator threshold at start up (Green LED) Vi nom, Io nom DC LOW indicator threshold after start up (Red LED) Vi nom, Io nom 3,500 VDC μF 5V 3.5 4.5 VDC 12V 15V 9 10.8 VDC 11 13.5 VDC 24V 5V 19.2 21.6 VDC 3.5 4.5 VDC 12V 15V 9 10.8 VDC 11 13.5 VDC 24V Efficiency mV 5V Vi nom, Io nom, Po / Pi VDC 19.2 21.6 Up to 86%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics min. Conditions Input fuse Internal surge voltage protection Rated over load protection Over voltage protection typ. max. Varistor IEC 61000-4-5 Vi nom (see typ current limited curve) Vi nom, Io nom (Auto Recovery) 110 150 % 5V 5.75 6.5 VDC 12V 15V 15 16.5 VDC 18 20 VDC 24V 30 33 VDC Output short circuit Fold forward Degree of protection IP20 www.chinfa.com 2014.08.11 unit T2A / 250VAC internal [email protected] P2 AMR4 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed APPROVALS AND STANDARDS UL / cUL UL 508 Listed UL 60950-1, UL 1310 Class 2 Power (only 5V w/o Class 2) Recognized ISA 12.12.01(Class I, Division 2, Groups A, B, C and D) TUV EN 60950-1 CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 91 x 71 x 56.5 mm (3.58 x 2.8 x 2.22 inches) Case material Plastic Weight 250g Packing 0.31kg ; 48 / 16kg / 2.28CUFT MECHANISM & PIN CONFIGURATION mm [inch] CONSTRUCTION Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safely and firmly on the rail; no tools required even to remove 71.00 [2.80] INSTALLATION 12. 00 [0. 47] 45. 00 [1. 77] N 5 6 56.50 [2.22] 51.50 [2.02] L 49.85 [1.96] Vout ADJ. DC LO DC ON 91.00 [3.58] 11. 00 [0. 43] 32.45 [1.28] 4 3 2 1 + + 91. 00 [3. 58] Ventilation / Cooling Normal convection All sides 25m/m free space For cooling recommended Connector size range AWG24-12 (0.2~2.5mm2) flexible / solid cable -Connector can withstand torque at maximum 6 pound-inches. 7m/m stripping at cable end recommends. Use copper conductors only, 60/75 oC GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] PIN ASSIGNMENT Designation 1, 2 - Negative output terminal + Positive output terminal L Input terminals (phase conductor, no polarity at DC input) N Input terminals (neutral conductor, no polarity at DC input) Vout ADJ. Trimmer-potentiometer for Vout adjustment DC ON Operation indicator LED DC LO DC Low indicator LED 5 OTHER 6 IN 3, 4 OUT PIN NO. www.chinfa.com 2014.08.11 Description [email protected] P3 AMR4 SERIES CIRCUIT SCHEMATIC ‧Block diagram for AMR4 series Fuse L Line Filter N Vo + Inrush Current Switching Limiter and Device rectifier Rectifier Vo - PWM Controller Opto Isolation Reference & Error Amp. Opto Isolation Over Voltage Detection Vout ADJ. Output Level Detection DC ON (Green LED) DC LO (Red LED) TYP. CURRENT LIMITED CURVE Output Voltage [ % ] AMR4-24 100 75 230 Vac 115 Vac 50 25 0 100 110 120 130 140 150 160 Power out [ % ] DERATING CURVE TYP. EFFICIENCY CURVE AMR4-24 87 EFFICIENCY [ % ] Power out [ % ] 100 62.5 Safe Operating Area 85 83 81 79 230 Vac 115 Vac 77 75 73 0 -40 www.chinfa.com 2014.08.11 56 Temperature [ oC ] 71 10 25 50 75 100 Power out [ % ] [email protected] P4