Click on Series name for product info on aimtec.com Series AM5TW-Z 5 Watt | DC-DC Converter FEATURES: RoHS compliant 24 Pin DIP Package High efficiency up to 84% Wide 4:1 input range Operating temperature -40oC to + 85oC Input / Output isolation 1500 or 3500VDC Pin compatible with multiple manufacturers Continuous short circuit protection Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) AM5TW-2403SZ AM5TW-2405SZ AM5TW-2407SZ AM5TW-2409SZ AM5TW-2412SZ AM5TW-2415SZ AM5TW-2418SZ AM5TW-2424SZ AM5TW-4803SZ AM5TW-4805SZ AM5TW-4807SZ AM5TW-4809SZ AM5TW-4812SZ AM5TW-4815SZ AM5TW-4818SZ AM5TW-4824SZ 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 1300 1000 690 550 .410 330 270 200 1300 1000 690 550 410 330 270 200 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 470 470 220 68 68 68 1000 1000 470 470 220 68 68 68 75 80 78 80 81 84 82 82 75 81 80 82 83 84 83 83 AM5TW-2403SH35Z AM5TW-2405SH35Z AM5TW-2407SH35Z AM5TW-2409SH35Z AM5TW-2412SH35Z AM5TW-2415SH35Z AM5TW-2418SH35Z AM5TW-2424SH35Z AM5TW-4803SH35Z AM5TW-4805SH35Z AM5TW-4807SH35Z AM5TW-4809SH35Z AM5TW-4812SH35Z AM5TW-4815SH35Z AM5TW-4818SH35Z AM5TW-4824SH35Z 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 1300 1000 690 550 410 330 270 200 1300 1000 690 550 410 330 270 200 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 1000 1000 470 470 220 68 68 68 1000 1000 470 470 220 68 68 68 75 80 78 80 81 84 82 82 75 81 80 82 83 84 83 83 Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) 1500 1500 1500 1500 1500 1500 1500 1500 ±100 ±100 ±100 ±100 ±68 ±22 ±22 ±22 79 81 80 82 83 83 83 83 Models Dual output Model AM5TW-2403DZ AM5TW-2405DZ AM5TW-2407DZ AM5TW-2409DZ AM5TW-2412DZ AM5TW-2415DZ AM5TW-2418DZ AM5TW-2424DZ www.aimtec.com F 051e R12.G Input Voltage (V) Output Voltage (V) 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 Output Current max (mA) ±600 ±500 ±347 ±278 ±209 ±167 ±139 ±104 Tel: +1 514 620 2722 1 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM5TW-Z 5 Watt | DC-DC Converter Models Dual output (continued) Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) AM5TW-4803DZ AM5TW-4805DZ AM5TW-4807DZ AM5TW-4809DZ AM5TW-4812DZ AM5TW-4815DZ AM5TW-4818DZ AM5TW-4824DZ 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±600 ±500 ±347 ±278 ±209 ±167 ±139 ±104 1500 1500 1500 1500 1500 1500 1500 1500 ±100 ±100 ±100 ±100 ±68 ±22 ±22 ±22 80 81 80 82 82 83 82 82 AM5TW-2403DH35Z AM5TW-2405DH35Z AM5TW-2407DH35Z AM5TW-2409DH35Z AM5TW-2412DH35Z AM5TW-2415DH35Z AM5TW-2418DH35Z AM5TW-2424DH35Z AM5TW-4803DH35Z AM5TW-4805DH35Z AM5TW-4807DH35Z AM5TW-4809DH35Z AM5TW-4812DH35Z AM5TW-4815DH35Z AM5TW-4818DH35Z AM5TW-4824DH35Z 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±600 ±500 ±347 ±278 ±209 ±167 ±139 ±104 ±600 ±500 ±347 ±278 ±209 ±167 ±139 ±104 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 ±100 ±100 ±100 ±100 ±68 ±22 ±22 ±22 ±100 ±100 ±100 ±100 ±68 ±22 ±22 ±22 79 81 80 82 83 83 83 83 80 81 80 82 82 83 82 82 Input Specifications Parameters Voltage range Filter Turn on Transient process time Start up time Absolute Maximum Rating Nominal Typical 24 48 9-36 18-72 Maximum Units VDC (Pi) Network 24 Vin 48 Vin 350 500 -0.7-40 -0.7-80 Peak Input Voltage time ms ms VDC 100 ms Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 3 sec Rated Units 1500 or 3500 VDC MOhm pF Maximum Units > 1000 470 Output Specifications Parameters Voltage accuracy Voltage balance Short Circuit protection Short circuit restart Over current protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Single) 3.3V output model www.aimtec.com F 051e R12.G Conditions Typical Dual Output ±1 ±1 0 – 100% load 0 – 100% load Continuous Auto recovery 120% Iout ±0.5 ±0.5 ±0.5 ±1.5 Tel: +1 514 620 2722 2 of 5 % % % % % % Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM5TW-Z 5 Watt | DC-DC Converter Output Specifications (continued) Parameters Load voltage regulation (Dual) Load voltage regulation (Dual) ±3.3V output model Temperature coefficient Ripple & Noise Rising time Minimum Load Current Conditions Typical 0 – 100% load ±0.5 Maximum % % ±1.5 %/oC mV p-p ms % of Max ±0.02 60 10 0 At 20MHz Bandwidth Units General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Derating Cooling Humidity Case material Weight Dimensions(L x W x H) MTBF Conditions Typical 100% load Full Load without Derating Maximum 260 -40 to +85 -40 to +125 100 Units KHz oC oC oC Non-Required Free air convection 90 % Nickel coated copper 26 g Tolerance ±0.5 mm or ±0.02 inches 1.28 x 0.84 x 0.41 inches 32.25 x 21.35 x 10.50 mm >960 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications noted in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency Approval CE EN55022 Class A, EN55024 IEC61000-4-2, Perf. Criteria B IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-5, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A NOTE: Also designed to meet IEC60950-1:2001 Standards Pin Out Specifications Pin 1 2 3 9 10 11 12/13 14 15 16 22 23 24 1500VDC Dual Single Dual +V Input N. C. N. C. Omitted -V Output +V Output -V Input +V Output -V Output Omitted N. C. N. C. +V Input +V Input -V Output Common Omitted Common +V Output -V Input +V Output Common Omitted Common -V Output +V Input Omitted -V Input -V Input Omitted Omitted N.C. Omitted +V Output Omitted -V Output +V Input +V Input Omitted Omitted -V Input -V Input Common Omitted -V Output Omitted +V Output Omitted Common +V Input +V Input Omitted www.aimtec.com F 051e R12.G 3500VDC Single Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM5TW-Z 5 Watt | DC-DC Converter Dimensions 0.25 (0.01) 20.32 (0.80) 31.75 (1.25) 1 2 3 9 10 11 12 Bottom View 24 23 22 15.24 (0.60) 27.94 (1.10) 0.50 (0.02) 16 15 14 13 2.54 (0.10) Built-in Stand-offs to ease PCB cleaning 10.16 (0.40) Printed Face 3.05 (0.12) All dimensions are typical: millimeters (inches) Pin Diameter: 0.50 ± 0.05 (0.02 ± 0.002) Pin Pitch Tolerance: ± 0.35 (±0.014) Case Tolerence: ± 0.5 (±0.02) Conducted Emissions: Dual Output 12uH Single Output 12uH L L +V output +V input C1 +V output +V input C1 DC/DC Converter Load DC/DC Converter 220uF 100V 220uF 100V -V output -V input -V input -V output Load Load Common C2 C2 1000pF 2KV 1000pF 2KV www.aimtec.com F 051e R12.G Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM5TW-Z 5 Watt | DC-DC Converter Surge: Dual Output +V output +V input Load DC/DC Converter C1 -V output 220uF 100V Load -V input Common NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.G Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only