Evolution Dual Series • 25A & 50A Output rating per channel @ 40°C • 24 to 280 & 48 to 600VAC Operating voltage • 4-15, 15-32 & 4-32VDC Control input options • Four input termination options • Zero-crossing (resistive loads) or random-fire (inductive loads) output • Input status LED indicator for each channel • Available with IP20 “Touch-Safe” Covers • UL508 Endurance Rating PRODUCT SELECTION Control Voltage 240V,25A 240V, 50A 480V, 25A 480V, 50A 4-15 VDC 15-32VDC 4-32 VDC CD2425D1U CD2425E1U CD2425W1U CD2450D1U CD2450E1U CD2450W1U CD4825D1U CD4825E1U CD4825W1U CD4850D1U CD4850E1U CD4850W1U AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-440Hz) [Vrms] Load Current Range (3) [Arms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum 1 Cycle Surge Current (50/60) [Apk] Maximum Surge Current 50Hz (20ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum I² t for Fusing 50/60Hz (1/2 cycle) [A² sec] Minimum Power Factor (with Maximum Load) Cx2425xxxx Cx2450xxxx Cx4825xxxx Cx4850xxxx 24-280 0.15-25 600 1.0 500 275/300 275 1.3 0.65 380/370 0.5 24-280 0.15-50 600 1.0 500 710/750 710 1.3 0.33 2520/2320 0.5 48-600 0.15-25 1200 1.0 500 275/300 275 1.3 0.65 380/370 0.5 48-600 0.15-50 1200 1.0 500 710/750 710 1.3 0.33 2520/2320 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Typical Input Current Nominal Input Impedance Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] CxxxDxxx CxxxExxx CxxxWxxx 4-15 VDC 4 VDC 1 .0 VDC 16 mA @ 5 VDC 300 Ohm 1/2 Cycle 1/2 Cycle 15-32 VDC 15 VDC 1 .0 VDC 18 mA @ 24 VDC 1500 Ohm 1/2 Cycle 1/2 Cycle 4-32 VDC 4 VDC 1 .0 VDC 10 mA @ 12 VDC See Note 5 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output (50/60Hz) Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Terminals Max. Torque Max. Wire Size GENERAL NOTES 1) 2) 3) 4) 5) All parameters at 25°C and per section unless otherwise specified. Off-state dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Heat sinking required, see derating curves. Turn-on time for random turn-on (R) versions is 0.1 msec. Input circuit incorporates active current limitation WIRING DIAGRAM Parameters 4000 Vrms 2500 Vrms 109 Ohm 10 pF -40 to 80 °C -40 to 125 °C 3.0 oz (86.5 g) Screw Type Output: 8-32 Output: 20 in lb (2.2Nm) Output:2 x AWG 8 (3.8mm) MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E116950 Rev. 113011 ANNEX - ENVIROMENTAL INFORMATION