Kemet CBR04C330GCGAC Hiq-cbr series, c0g dielectric, low esr 6.3 - 500 vdc, 1 mhz - 50 ghz (rf & microwave) Datasheet

Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR
6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Overview
KEMET’s CBR Series surface mount multilayer ceramic
capacitors (MLCCs) in C0G dielectric feature a robust and
exceptionally stable copper electrode dielectric system
that offers excellent low loss performance (high Q). These
devices provide extremely low ESR and high self-resonance
characteristics, and are well-suited for resonant circuit
applications or those where Q and stability of capacitance
characteristics are required. CBR Series capacitors
exhibit no change in capacitance with respect to time and
voltage, and boast a negligible change in capacitance with
reference to ambient temperature. Capacitance change is
limited to ±30 ppm/ºC from −55°C to +125°C.
CBR Series devices are suitable for many circuit applications
including RF power amplifiers, mixers, oscillators, low noise
amplifiers, filter networks, antenna tuning, timing circuits,
delay lines, and MRI imaging coils.
Benefits
•
•
•
•
•
•
•
•
•
High Q and low ESR
High SRF
High thermal stability
1 MHz to 50 GHz frequency range
Operating temperature range of −55°C to +125°C
Base metal electrode (BME) dielectric system
Pb-free and RoHS compliant
0201, 0402, 0603, and 0805 case sizes (inches)
DC voltage ratings of 6.3 V, 10 V, 25 V, 50 V, 100 V, 200 V,
250 V, and 500 V
• Capacitance offerings ranging from 0.1 pF up to 100 pF
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Ordering Information
CBR
02
C
330
F
9
G
Series
Case Size
(L"x W")
Specification/
Series
Capacitance
Code (pF)
Capacitance
Tolerance
Rated
Voltage
(VDC)
Dielectric
02 = 0201
04 = 0402
06 = 0603
08 = 0805
C = Standard
Two significant digits
+ number of zeros
Use 9 for 1.0 – 9.9 pF
Use 8 for 0.1 – 0.99 pF
e.g., 2.2 pF = 229
e.g., 0.5 pF = 508
A = ±0.05 pF
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
CBR
1
9 = 6.3 V
8 = 10 V
3 = 25 V
5 = 50 V
1 = 100 V
2 = 200 V
A = 250 V
C = 500 V
G = C0G
A
C
Termination
Termination Finish
Style
A = N/A
C = 100% Matte Sn
Packaging/
Grade
(C-Spec)1
Blank =
7" Reel
Unmarked
When ordering CBR Series devices, a "suffix" or "C-Spec" is not required to indicate a 7" reel packaging option. CBR devices are only available and
shipped on 7" reels (paper tape). Bulk bag and cassette packaging options are not available. Please contact KEMET if you have a specific, non-standard
packaging requirement.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
1
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Benefits cont'd
• Available capacitance tolerances of ±0.05 pF, ±0.1 pF,
±0.25 pF, ±0.5 pF, ±1%, ±2%, and ±5%
• No piezoelectric noise
• No capacitance change with respect to applied rated DC
voltage
•
•
•
•
Negligible capacitance change with respect to temperature
No capacitance decay with time
Non-polar device, minimizing installation concerns
100% pure matte tin-plated termination finish allowing for
excellent solderability
Applications
Typical applications include critical timing, tuning, bypass, coupling, feedback, filtering, impedance matching and DC
blocking.
Field applications include wireless and cellular base stations, wireless LAN, subscriber-based wireless services, wireless
broadcast equipment, satellite communications, RF power amplifier (PA) modules, filters, voltage-controlled oscillators
(VCOs), PAs, matching networks, RF modules, satellite communications and medical electronics.
Qualification
RF and microwave products are subject to internal qualification. Details regarding test methods and conditions are
referenced in Table 4, Performance & Reliability.
Environmental Compliance
Pb-free and RoHS compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
2
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Dimensions – Millimeters (Inches)
W
L
T
B
Case
Size (in.)
Case
Size (mm)
L
Length
W
Width
T
Thickness
B
Bandwidth
0201
0603
0402
1005
0603
1608
0805
2012
0.60±0.03
(0.024±0.001)
1.00±0.05
(0.040±0.002)
1.60±0.10
(0.063±0.004)
2.00±0.20
(0.079±0.008)
0.30±0.03
(0.012±0.001)
0.50±0.05
(0.020±0.002)
0.80±0.10
(0.031±0.004)
1.25±0.20
(0.049±0.008)
0.30±0.03
(0.012±0.001)
0.50±0.05
(0.020±0.002)
0.80±0.07
(0.031±0.003)
0.85±0.10
(0.031±0.004)
0.15±0.05
(0.006±0.002)
0.25+0.05/−0.10
(0.010+0.002/−0.004)
0.40±0.15
(0.016±0.006)
0.50±0.20
(0.020±0.008)
Mounting
Technique
Solder Reflow Only
Solder Wave
or Solder Reflow
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range:
Capacitance Change with Reference to
+25°C and 0 VDC Applied (TCC):
Aging Rate (Maximum % Capacitance Loss/Decade Hour):
Dielectric Withstanding Voltage (DWV):
1
2
3
Quality Factor (Q):
Insulation Resistance (IR) Limit at 25°C:
−55°C to +125°C 0 ±30 ppm/ºC (0 ±60 ppm/ºC for 0201 case size product ≥ 22 pF)
0%
See Dielectric Withstanding Voltage Table
(5±1 seconds and charge/discharge not exceeding 50 mA)
≥ 1,000 for capacitance values ≥ 30 pF
≥ 400 + 20ºC for capacitance values < 30 pF
10 GΩ minimum (rated voltage applied for 120±5 seconds)
DWV is the voltage a capacitor can withstand (survive) for a short period of time. It exceeds the nominal and continuous working voltage of the
capacitor.
2
Capacitance and quality factor (Q) measured at 1 MHz ±100 kHz and 1.0 ±0.2 Vrms.
3 To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON."
1
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
3
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Dielectric Withstanding Voltage Table
Rated Voltage (VDC)
≤100 V
200 V
250 V
500 V
DWV
250%
200%
200%
150%
Electrical Characteristics
SRF (MHz) vs. Cap (pF)
100,000
0201
SRF (MHz)
0402
0603
10,000
0805
1,000
100
0.1
1
Cap (pF)
10
100
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
4
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Electrical Characteristics cont'd
Q vs. Frequency 0402
ESR vs. Frequency 0402
10,000
1
1.8pF
1,000
4.7pF
4.7pF
10pF
0.1
18pF
Q
ESR (Ohms)
1.8pF
10pF
100
18pF
22pF
22pF
10
0.01
100
1,000
Freq (MHz)
10,000
1
100
ESR vs. Frequency 0603
10,000
Q vs. Frequency 0603
10,000
1
2.2pF
2.2pF
1,000
4.7pF
4.7pF
10pF
0.1
10pF
Q
ESR (Ohms)
1,000
Freq (MHz)
20pF
20pF
100
47pF
47pF
10
0.01
100
1,000
Freq (MHz)
1
100
10,000
ESR vs. Frequency 0805
10,000
2.2pF
1,000
2.2pF
10pF
33pF
0.1
33pF
Q
10pF
47pF
100
100pF
47pF
100pF
0.01
100
10,000
Q vs. Frequency 0805
1
ESR (Ohms)
1,000
Freq (MHz)
1,000
Freq (MHz)
10,000
10
1
100
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
1,000
Freq (MHz)
10,000
C1030_C0G_CBR • 8/1/2016
5
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Table 1 – CBR Series, Capacitance Range Waterfall
Case Size – Inches (mm)
Length
Width
Thickness
Bandwidth
mm
(Inches)
mm
(Inches)
mm
(Inches)
mm
(Inches)
0201 (0603)
0402 (1005)
0603 (1608)
0805 (2012)
0.60 ± 0.03
(0.024 ± 0.001)
0.30 ± 0.03
(0.012 ± 0.001)
0.30 ± 0.03
(0.012 ± 0.001)
0.15 ± 0.05
(0.006 ± 0.002)
1.00 ± 0.05
(0.040 ± 0.002)
0.50 ± 0.05
(0.020 ± 0.002)
0.50 ± 0.05
(0.020 ± 0.002)
0.25 + 0.05 / -0.10
(0.010 + 0.002 / -0.004)
1.60 ± 0.10
(0.063 ± 0.004)
0.80 ± 0.10
(0.031 ± 0.004)
0.80 ± 0.07
(0.031 ± 0.003)
0.40 ± 0.15
(0.016 ± 0.006)
2.00 ± 0.20
(0.079 ± 0.008)
1.25 ± 0.20
(0.049 ± 0.008)
0.85 ± 0.10
(0.031 ± 0.004)
0.50 ± 0.20
(0.020 ± 0.008)
Rated Voltage (VDC)
6.3
10
25
50
25
Voltage Code
9
8
3
5
3
108*
208
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
108*
208
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
108*
208
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
108*
208
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
108
208
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
108
208
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
108*
208
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
108*
208
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
Rated Voltage (VDC)
6.3
10
25
50
25
50
100
200
50
Voltage Code
9
8
3
5
3
5
1
2
5
Capacitance
Capacitance
Tolerance
0.1 pF
0.2 pF
0.3 pF
0.4 pF
0.5 pF
0.6 pF
0.7 pF
0.8 pF
0.9 pF
1.0 pF
1.1 pF
1.2 pF
1.3 pF
1.4 pF
1.5 pF
1.6 pF
1.7 pF
1.8 pF
1.9 pF
2.0 pF
2.1 pF
2.2 pF
2.3 pF
2.4 pF
2.5 pF
2.6 pF
2.7 pF
2.8 pF
2.9 pF
3.0 pF
3.1 pF
3.2 pF
3.3 pF
3.4 pF
3.5 pF
3.6 pF
3.7 pF
3.8 pF
3.9 pF
4.0 pF
4.1 pF
4.2 pF
4.3 pF
4.4 pF
4.5 pF
4.6 pF
4.7 pF
4.8 pF
4.9 pF
A = ±0.05 pF
B = ±0.1 pF
A = ±0.05 pF
B = ±0.1 pF
C = ±0.25 pF
50
100
200
50
5
1
2
5
100
250
50
100
250
500
1
A
5
1
A
C
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
308
408
508
608
708
808
908
109
119
129
139
149
159
169
179
189
199
209
219
229
239
249
259
269
279
289
299
309
319
329
339
349
359
369
379
389
399
409
419
429
439
449
459
469
479
489
499
100
250
50
100
250
500
1
A
5
1
A
C
Capacitance Code (Available Capacitance)
*Available only in "B" ( ±0.1pF) capacitance tolerance.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
6
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Table 1 – CBR Series, Capacitance Range Waterfall cont'd
Case Size – Inches (mm)
Length
Width
Thickness
Bandwidth
mm
(Inches)
mm
(Inches)
mm
(Inches)
mm
(Inches)
Rated Voltage (VDC)
6.3
Voltage Code
9
Capacitance
Capacitance
Tolerance
0201 (0603)
0402 (1005)
0603 (1608)
0805 (2012)
0.60 ± 0.03
(0.024 ± 0.001)
0.30 ± 0.03
(0.012 ± 0.001)
0.30 ± 0.03
(0.012 ± 0.001)
0.15 ± 0.05
(0.006 ± 0.002)
1.00 ± 0.05
(0.040 ± 0.002)
0.50 ± 0.05
(0.020 ± 0.002)
0.50 ± 0.05
(0.020 ± 0.002)
0.25 + 0.05 / -0.10
(0.010 + 0.002 / -0.004)
1.60 ± 0.10
(0.063 ± 0.004)
0.80 ± 0.10
(0.031 ± 0.004)
0.80 ± 0.07
(0.031 ± 0.003)
0.40 ± 0.15
(0.016 ± 0.006)
2.00 ± 0.20
(0.079 ± 0.008)
1.25 ± 0.20
(0.049 ± 0.008)
0.85 ± 0.10
(0.031 ± 0.004)
0.50 ± 0.20
(0.020 ± 0.008)
10
25
50
25
8
3
5
3
50
100
200
50
5
1
2
5
100
250
50
100
250
500
1
A
5
1
A
C
Capacitance Code (Available Capacitance)
A = ±0.05 pF
B = ±0.1 pF
C = ±0.25 pF
509
509
509
509
509
509
509
509
509
509
509
509
509
509
509
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
519
529
539
549
559
569
579
589
599
609
619
629
639
649
659
669
679
689
699
709
719
729
739
749
759
769
779
789
799
809
819
829
839
849
859
869
879
889
899
909
919
929
939
949
959
Rated Voltage (VDC)
6.3
10
25
50
25
50
100
200
50
100
250
50
100
250
500
Voltage Code
9
8
3
5
3
5
1
2
5
1
A
5
1
A
C
5.0 pF
5.1 pF
5.2 pF
5.3 pF
5.4 pF
5.5 pF
5.6 pF
5.7 pF
5.8 pF
5.9 pF
6.0 pF
6.1 pF
6.2 pF
6.3 pF
6.4 pF
6.5 pF
6.6 pF
6.7 pF
6.8 pF
6.9 pF
7.0 pF
7.1 pF
7.2 pF
7.3 pF
7.4 pF
7.5 pF
7.6 pF
7.7 pF
7.8 pF
7.9 pF
8.0 pF
8.1 pF
8.2 pF
8.3 pF
8.4 pF
8.5 pF
8.6 pF
8.7 pF
8.8 pF
8.9 pF
9.0 pF
9.1 pF
9.2 pF
9.3 pF
9.4 pF
9.5 pF
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
7
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Table 1 – CBR Series, Capacitance Range Waterfall cont'd
Case Size – Inches (mm)
Length
Width
Thickness
Bandwidth
mm
(Inches)
mm
(Inches)
mm
(Inches)
mm
(Inches)
0201 (0603)
0402 (1005)
0603 (1608)
0805 (2012)
0.60 ± 0.03
(0.024 ± 0.001)
0.30 ± 0.03
(0.012 ± 0.001)
0.30 ± 0.03
(0.012 ± 0.001)
0.15 ± 0.05
(0.006 ± 0.002)
1.00 ± 0.05
(0.040 ± 0.002)
0.50 ± 0.05
(0.020 ± 0.002)
0.50 ± 0.05
(0.020 ± 0.002)
0.25 + 0.05 / -0.10
(0.010 + 0.002 / -0.004)
1.60 ± 0.10
(0.063 ± 0.004)
0.80 ± 0.10
(0.031 ± 0.004)
0.80 ± 0.07
(0.031 ± 0.003)
0.40 ± 0.15
(0.016 ± 0.006)
2.00 ± 0.20
(0.079 ± 0.008)
1.25 ± 0.20
(0.049 ± 0.008)
0.85 ± 0.10
(0.031 ± 0.004)
0.50 ± 0.20
(0.020 ± 0.008)
Rated Voltage (VDC)
6.3
10
25
50
25
Voltage Code
9
8
3
5
3
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
969
979
989
999
100
110
120
130
150
160
180
200
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
Rated Voltage (VDC)
6.3
10
25
50
25
50
100
200
50
Voltage Code
9
8
3
5
3
5
1
2
5
Capacitance
Capacitance
Tolerance
9.6 pF
9.7 pF
9.8 pF
9.9 pF
10 pF
11 pF
12 pF
13 pF
15 pF
16 pF
18 pF
20 pF
22 pF
24 pF
27 pF
30 pF
33 pF
36 pF
39 pF
43 pF
47 pF
51 pF
56 pF
62 pF
68 pF
75 pF
82 pF
91 pF
100 pF
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
50
100
200
50
5
1
2
5
100
250
50
100
250
500
1
A
5
1
A
C
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
969
979
989
999
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
100
250
50
100
250
500
1
A
5
1
A
C
Capacitance Code (Available Capacitance)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
8
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Table 2 – Chip Thickness/Reeling Quantities
Chip Size
Inches (mm)
Chip
Thickness
(mm)
0201 (0603)
0.30 ±0.03
15,000
0402 (1005)
0.50 ±0.05
10,000
0603 (1608)
0.80 ±0.07
4,000
0805 (2012)
0.85 ±0.10
4,000
Reel Quantity
7" Paper
13" Paper
Contact KEMET
for availability.
Table 3 – Chip Capacitor Land Pattern Design Recommendations per IPC–7351 (mm)
Case
Size
(Inches)
Case
Size
(mm)
0201
Density Level A:
Maximum (Most) Land
Protrusion
Density Level B:
Median (Nominal) Land
Protrusion
Density Level C:
Minimum (Least) Land
Protrusion
C
Y
X
V1
V2
C
Y
X
V1
V2
C
Y
X
V1
V2
0603
0.38
0.56
0.52
1.80
1.00
0.33
0.46
0.42
1.50
0.80
0.28
0.36
0.32
1.20
0.60
0402
1005
0.50
0.72
0.72
2.20
1.20
0.45
0.62
0.62
1.90
1.00
0.40
0.52
0.52
1.60
0.80
0603
1608
0.90
1.15
1.10
4.00
2.10
0.80
0.95
1.00
3.10
1.50
0.60
0.75
0.90
2.40
1.20
0805
2012
1.00
1.35
1.55
4.40
2.60
0.90
1.15
1.45
3.50
2.00
0.75
0.95
1.35
2.80
1.70
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow
solder processes. KEMET only recommends wave soldering of 0603(1608) and 0805 (2012) case sizes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform
qualification testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
Image below based on Density Level B for an EIA 1608 case size.
V1
Y
Y
X V2
X
C
C
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
9
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Soldering Process
Recommended Soldering Technique:
• Solder wave or solder reflow for 0603 and 0805 case sizes
• 0201 and 0402 case sizes are limited to solder reflow only
Recommended Soldering Profile:
• KEMET recommends following the guidelines outlined in IPC/JEDEC J–STD–020
Recommended Solder Alloys:
Alloy
Composition
Solidus
Liquidous
In50
50 In, 50 Pb
180°C 209°C In52
52 In, 48 Sn
118°C 118°C Sn62
62.5 Sn, 36.1 Pb, 1.4 Ag
179°C 179°C Sn63
63 Sn, 37 Pb
183°C 183°C Pb-Free
95.5 Sn, 3.8 Ag, 0.7 Cu
217°C 217°C Hi-Temp
5 Sn, 93.5 Pb, 1.5 Ag
296°C 301°C Sn5
5 Sn, 95 Pb
308°C 312°C © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
10
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Table 4 – Performance & Reliability: Test Methods & Conditions
Stress
Test or Inspection Method
Requirements
Pressurizing force:
0201 case size: 2N
0402 & 0603 case sizes: 5N
0805 case size: 10N
Test time: 10±1 second
No visible damage or separation of termination system.
Vibration frequency: 10 ~ 55 Hz/minimum
Total amplitude: 1.5 mm
Test time: 6 hours (Two hours each in three mutually
perpendicular directions.)
No visible damage.
Cap change and Q/DF: To meet initial specification
Solder temperature: 235±5°C
Dipping time: 2±0.5 seconds
95% minimum coverage of termination finish.
Board Flex
Capacitor is mounted to a substrate which is flexed by
means of ram at a rate of 1 mm per second until the
deflection becomes 1 mm. (Deflection is maintained
for 5±1 second)
Store at room temperature for 24±2 hours before
measuring electrical properties.
No visible damage.
Capacitance change: within ±5.0% or ±0.5 pF, whichever
is larger.
(Capacitance change is monitored during flexure.)
Resistance to
Soldering Heat
Solder temperature: 260±5°C
Dipping time: 10±1 second
Preheating: 120 to 150°C for 1 minute before immerse
the capacitor in a eutectic solder.
Store at room temperature for 24±2 hours before
measuring electrical properties.
No visible damage.
Capacitance change: within ±2.5% or ±0.25 pF, whichever
is larger.
Q/DF, IR and dielectric strength: To meet initial
requirements.
25% maximum leaching on each edge.
Terminal Strength
Vibration
Resistance
Solderability
5 cycles of steps 1 - 4:
Temperature
Cycling
Step
Temperature (ºC)
Time (min.)
1
Minimum operating
temperature +0/−3
30 ±3
2
Room temperature
2~3
3
Maximum operating
temperature +3/−0
30 ±3
4
Room temperature (25ºC)
2~3
No visible damage.
Capacitance change: within ±2.5% or ±0.25 pF, whichever
is larger.
Q/DF, IR and dielectric strength: To meet initial
requirements.
Store at room temperature for 24±2 hours before
measuring electrical properties.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
11
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Table 4 – Performance & Reliability: Test Methods & Conditions cont'd
Stress
Humidity (Damp Heat)
Steady State
Humidity (Damp Heat)
Load
High Temperature Life
ESR
Test or Inspection Method
Test temperature: 40±2°C
Humidity: 90 ~ 95% RH
Test time: 500 +24/−0 hours
Store at room temperature for 24±2 hours before
measuring electrical properties.
Test temperature: 40±2°C
Humidity: 90 ~ 95% RH
Test time: 500 +24/−0 hours
Applied voltage: rated voltage
Store at room temperature for 24±2 hours before
measuring electrical properties.
Test temperature: 125±3°C
Applied voltage:
200% of rated voltage (10 VDC – 250 VDC)
150% of rated voltage (6.3 VDC and 500 VDC)
Test time: 1,000 +24/−0 hours
Store at room temperature for 24±2 hours before
measuring electrical properties.
The ESR should be measured at room temperature and
tested at frequency 1±0.1 GHz.
The ESR should be measured at room temperature and
tested at frequency 500±50 MHz.
Requirements
No visible damage.
Capacitance change: within ±5.0% or ±0.5 pF, whichever is
larger.
Q/DF value: Capacitance ≥ 30 pF, Q ≥ 350,
10 pF ≤ Capacitance < 30 pF, Q ≥ 275+2.5°C
Capacitance < 10 pF; Q ≥ 200+10ºC
IR: ≥ 1GΩ
No visible damage.
Capacitance change: within ±7.5% or ±0.75 pF, whichever is
larger.
Q/DF value: Capacitance ≥ 30 pF, Q ≥ 200,
Capacitance < 30 pF, Q ≥ 100+10/3ºC
IR: ≥ 500MΩ
No visible damage.
Capacitance change: within ±3.0% or ±0.3 pF, whichever is
larger.
Q/DF value: Capacitance ≥ 30 pF, Q ≥350,
10 pF ≤ Capacitance < 30 pF, Q ≥ 275 +2.5°C
Capacitance <10 pF, Q ≥ 200 +10°C
IR: ≥1 GΩ
0201 Case Size
0402 Case Size
0.1 pF ≤ Capacitance ≤ 1 pF: 0.1 pF ≤ Capacitance ≤ 1 pF:
< 350 mΩ/pF
< 350 mΩ/pF
1.0 pF < Capacitance ≤ 5.0 pF: 1.0 pF < Capacitance ≤ 5.0 pF:
< 300 mΩ
< 300 mΩ
5.0 pF < Capacitance ≤ 22.0 5.0 pF < Capacitance ≤ 100
pF: < 250 mΩ
pF: < 250 mΩ
0603 Case Size
0805 Case Size
0.3 pF ≤ Capacitance ≤ 1 pF: 0.3 pF ≤ Capacitance ≤ 1 pF:
< 1,500 mΩ
< 1,500 mΩ
1 pF < Capacitance ≤ 10 pF: 1 pF < Capacitance ≤ 10 pF:
< 250 mΩ
< 250 mΩ
10 pF < Capacitance ≤ 100 pF:
Capacitance > 10 pF:
< 200 mΩ
< 200 mΩ
0201 case size, 22pF ≤ Cap ≤ 33pF: < 300 mΩ
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
12
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Storage and Handling
Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in
other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long term storage. In addition, packaging materials will be degraded by high temperature–reels may soften or warp
and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum
storage humidity not exceed 70% relative humidity. Temperature fluctuations should be minimized to avoid condensation on
the parts and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability chip stock
should be used promptly, preferably within 1.5 years of receipt.
Construction
Detailed Cross Section
Dielectric Material
(BaTiO3 Based)
Barrier Layer
(Ni)
Dielectric Material
(BaTiO3 Based)
Termination Finish
(100% Matte Sn)
End Termination/
External Electrode
(Cu)
Inner Electrodes
(Cu)
End Termination/
External Electrode
(Cu)
Barrier Layer
(Ni)
Termination Finish
(100% Matte Sn)
Inner Electrodes
(Cu)
Marking
CBR series devices are supplied unmarked.
If you require marked product, please contact KEMET for availability of a laser-marked option.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
13
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Tape & Reel Packaging Information
KEMET offers RF and Microwave Multilayer Ceramic Chip Capacitors packaged in 8 mm tape on 7" reels. This packaging
system is compatible with all tape-fed automatic pick and place systems.
Bar Code Label
Anti-Static Reel
®
ET
KEM
Punched Paper Carrier
Sprocket Holes
Punched Cavity
8 mm Carrier Tape
178 mm (7.00")
Anti-Static Cover Tape
(0.10mm (0.004") Maximum Thickness)
Table 5 – Carrier Tape Configuration (mm)
EIA Case Size
Tape Size (W)*
Lead Space (P1)*
0201 – 0402
8
2
0603 – 1210
8
4
*Refer to Figure 1 for W and P1 carrier tape reference locations.
*Refer to Table 6 for tolerance specifications.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
14
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Figure 1 – Punched (Paper) Carrier Tape Dimensions
P0
T
E
P2
A0
D0
F
W
B0
D1
P1
K1
A0
Table 6 – Punched (Paper) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
D0
E1
P0
P2
8 mm
1.55+0.05
(0.061+0.002)
1.55±0.05
(0.061±0.002)
4.0±0.10
(0.157±0.004)
2.0±0.05
(0.079±0.002)
R Reference
Note 2
25.0
(0.984)
K0
-
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
8 mm
Pitch
Half (2 mm)
Single (4 mm)
A0
B0
0.37±0.03
(0.015±0.001)
0.62±0.05
(0.025±0.002)
1.00±0.10
(0.040±0.004)
1.50±0.10
(0.06±0.004)
0.67±0.03
(0.03±0.001)
1.12±0.05
(0.04±0.002)
1.80±0.10
(0.07±0.004)
2.30±0.10
(0.09±0.004)
F
3.5±0.05
(0.138±0.002)
P1
T
W
0.42±0.03
(0.017±0.001)
2.0±0.05
(0.079±0.002) 0.60±0.05
(0.024±0.002)
8.0±0.10
0.95±0.05 (0.315±0.004)
(0.037±0.002)
4.0±0.10
(0.157±0.004)
0.95±0.05
(0.037±0.002)
D1
-
2. The tape with or without components shall pass around R without damage (see Figure 3).
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
15
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm
0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Bending Radius
Punched
Carrier
Bending
Radius
R
Figure 3 – Tape Leader & Trailer Dimensions
Punched Carrier
8mm
END
Carrier Tape
Round Sprocket Holes
Leader
Top Cover Tape
Trailer
110mm minimum
Top Cover Tape
Components
20mm
minimum
400mm ~ 560mm
Minimum (empty
cavities and leader)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
16
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
Figure 4 – Maximum Camber
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
Figure 5 – Reel Dimensions
C
A
N
W1
Table 7 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
Reel Size
A
C
8 mm
7
178±0.10
(7.008±0.004)
13.0±0.20
(0.512±0.008)
Variable Dimensions — Millimeters (Inches)
Tape Size
N Minimum See Note 2, Table 6
W1
8 mm
60±0.10
(2.4±0.04)
8.4+1.5/−0.0
(0.331+0.059/−0.0)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
17
Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications
HiQ-CBR Series, C0G Dielectric, Low ESR 6.3 – 500 VDC, 1 MHz – 50 GHz (RF & Microwave)
KEMET Electronic Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1030_C0G_CBR • 8/1/2016
18
Similar pages