CPH3122 / CPH3222 Ordering number : ENN7220A CPH3122 / CPH3222 PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Applications • Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. Specifications ( ) : CPH3122 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (--30)40 V Collector-to-Emitter Voltage VCEO (--)30 V Emitter-to-Base Voltage VEBO (--)5 V IC (--)3 A Collector Current Collector Current (Pulse) Base Current ICP IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg (--)5 (--)600 Mounted on a ceramic board (600mm2✕0.8mm) A mA 0.9 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Conditions Ratings min typ max VCB=(--)30V, IE=0 VEB=(--)4V, IC=0 Gain-Bandwidth Product hFE fT VCE=(--)2V, IC=(--)500mA VCE=(--)10V, IC=(--)500mA Output Capacitance Cob VCB=(--)10V, f=1MHz 200 Unit (--)0.1 µA (--)0.1 µA 560 (400)420 Marking : CPH3122 : AT, CPH3222 : CT (25)20 MHz pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1504 TS IM TB-00000300 / 41002 TS IM TA-100028,100030 No.7220-1/5 CPH3122 / CPH3222 Continued from preceding page. Parameter Symbol VCE(sat)1 Collector-to-Emitter Saturation Voltage VBE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Turn-ON Time Storage Time min typ Unit max (--180)130 (--270)195 IC=(--)1.5A, IB=(--)30mA IC=(--)1.5A, IB=(--)75mA VCE(sat)2 Base-to-Emitter Saturation Voltage Ratings Conditions IC=(--)1.5A, IB=(--)30mA IC=(--)10µA, IE=0 (--)120 (--)180 (--)0.83 (--)1.2 mV mV V (--30)40 V (--)30 V IC=(--)1mA, RBE=∞ IE=(--)10µA, IC=0 (--)5 V ton tstg See specified Test Circuit. (50)30 See specified Test Circuit. (270)300 ns tf See specified Test Circuit. (27)25 ns Fall Time Package Dimensions ns Switching Time Test Circuit unit : mm 2150A 2.9 0.6 0.4 3 IB1 PW=20µs D.C.≤1% 0.2 0.15 OUTPUT IB2 INPUT RB VR RL =24Ω 1.6 2.8 0.05 0.6 50Ω 2 1 + 470µF + 100µF 1.9 0.7 0.9 0.2 1 : Base 2 : Emitter 3 : Collector VBE= --5V VCC=12V IC=20IB1= --20IB2=500mA For PNP, the polarity is reversed. SANYO : CPH3 --1.2 --6mA --4mA --1.0 --0.8 --2mA --0.6 --0.4 1.4 A 6mA m A 20m 40mA 1.6 8mA A 10m 30 --8mA Collector Current, IC -- A --1.4 1.8 --10mA 50mA mA --50m --1.6 IC -- VCE 2.0 0 --2 --3 A --40mA 0m CPH3122 --1.8 Collector Current, IC -- A A IC -- VCE --2.0 4mA 1.2 1.0 0.8 2mA 0.6 0.4 --0.2 0.2 IB=0 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V --0.9 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1.0 IT04604 IC -- VBE 3.0 CPH3222 VCE=2V CPH3122 VCE= --2V 2.5 --2.0 --1.5 Ta=7 5 °C 25°C --25°C --1.0 --0.5 2.0 1.5 1.0 Ta=7 5°C 25°C --25°C Collector Current, IC -- A --2.5 Collector Current, IC -- A 0.9 Collector-to-Emitter Voltage, VCE -- V IT04603 IC -- VBE --3.0 IB=0 CPH3222 0 --1.0 0.5 0 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V --1.2 IT04605 0 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE -- V 1.2 IT04606 No.7220-2/5 CPH3122 / CPH3222 hFE -- IC 1000 7 3 CPH3222 VCE=2V 7 Ta=75°C 25°C --25°C DC Current Gain, hFE DC Current Gain, hFE 5 hFE -- IC 1000 CPH3122 VCE= --2V 2 100 5 Ta=75°C 25°C --25°C 3 2 7 5 100 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 7 5 3 2 100 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Output Capacitance, Cob -- pF Output Capacitance, Cob -- pF 5 3 2 10 --1.0 2 3 5 7 2 --10 3 Collector-to-Base Voltage, VCB -- V --100 7 C 5° 5 =7 Ta °C C 5° 25 -- 2 3 2 5 7 10 IT04608 3 2 100 7 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT04610 Cob -- VCB CPH3222 f=1MHz 5 3 2 5 2 3 2 3 5 7 2 10 3 Collector-to-Base Voltage, VCB -- V VCE(sat) -- IC 3 2 5 IT04611 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 5 7 1.0 CPH3222 VCE=10V 10 1.0 5 CPH3122 IC / IB=20 3 7 7 CPH3122 f=1MHz 7 2 Collector Current, IC -- A Cob -- VCB 100 5 7 0.1 f T -- IC 5 0.01 5 7 --10 IT04609 Collector Current, IC -- A 3 1000 Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz CPH3122 VCE= --10V 2 Collector Current, IC -- A f T -- IC 1000 7 7 0.01 5 7 --10 IT04607 3 5 IT04612 VCE(sat) -- IC CPH3222 IC / IB=20 2 100 7 5 °C 75 = C Ta 5° --2 3 2 25 °C 10 7 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 7 IT04613 5 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 2 3 5 7 IT04614 No.7220-3/5 CPH3122 / CPH3222 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 VCE(sat) -- IC 7 CPH3122 IC / IB=50 5 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 --1000 7 5 3 2 °C 75 --100 7 5 Ta= 3 --25 °C 25° C 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V Ta= --25°C 3 --0.01 2 3 5 7 --0.1 75°C 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 10 7 5 ms 3 5 7 0.1 2 3 5 s s DC op tio n CPH3122 / CPH3222 Ta=25°C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2✕0.8mm) 5 7 1.0 2 3 2 3 5 7 IT04616 CPH3222 IC / IB=50 2 1.0 Ta= --25°C 7 75°C 25°C 5 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 5 7 IT04618 PC -- Ta CPH3122 / CPH3222 era 3 7 1.0 VBE(sat) -- IC IT04617 µs 100 s 0µ 1m 0m 2 2 °C 0.9 10 0.01 0.1 25 2 C 5° --2 3 1.0 10 3 2 3 2 = Ta <50µs 1.0 7 5 0.1 7 5 °C 75 5 3 0.01 7 50 3 2 5 ASO ICP=5A IC=3A 7 Collector Current, IC -- A Collector Dissipation, PC -- W Base-to-Emitter Saturation Voltage, VBE(sat) -- V --1.0 5 100 3 2 25°C 2 IT04615 CPH3122 IC / IB=50 7 3 10 0.01 7 VBE(sat) -- IC 3 Collector Current, ID -- A 5 VCE(sat) -- IC CPH3222 IC / IB=50 5 7 10 2 Collector-to-Emitter Voltage, VCE -- V M ou 0.8 nt 0.7 ed on ac er 0.6 am ic 0.5 bo ar 0.4 d (6 00 m 0.3 m2 ✕ 0. 8m 0.2 m ) 0.1 0 3 5 IT04619 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT04620 No.7220-4/5 CPH3122 / CPH3222 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2004. Specifications and information herein are subject to change without notice. PS No.7220-5/5