コモンモードチョークコイル （DC、信号ライン用）SMDタイプ COMMON MODE CHOKE COILS (FOR DC AND SIGNAL LINES) SMD TYPE OPERATING TEMP. K25VJ105C（製品自己発熱を含む） fIncluding self-generated heatg 等価回路 Equivalent circuits 特長 FEATURES CM04RC•BU05MC YSMT対応 Y高結合なコイル構造によりコモンモードノイズの除去に最適 用途 CM04CR / BU05MC • Available in embossed tape and reel. • Highly coupled coil construction ideal for common mode noise attenuation APPLICATIONS YImmunity against undesirable external line radiation fields and broadcast waves generated by multifunction telephone sets, PBXs, and facsimile machines. YPreventive measure against DC line noise in electronic equipment. YSuppresses radiated emissions from secondary power supplies and signal lines on AC adapters, battery chargers, and digital equipment. • Excellent for reducing radiated noise in DVC (digital video cameras) and DSC (digital still cameras) • Offers high speed differential mode noise attenuation in USB and IEEE1394 connectors in personal computers, printers, scanners and other computer peripherals Y多機能電話機,PBX、FAXなど外線の不要幅射電界および放送波に対するイ ミュニティ対策 Y各種電子機器のDCラインのノイズ対策 YACアダプタ、バッテリーチャージャー及び各種デジタル機器の電源2 次側 ライン、信号ラインの不要幅射対策 YDVC,DSC等の電源、2次側DCラインの不要輻射対策。 Yパーソナルコンピューター、プリンター、スキャナー等のUSB(DJ,DK)及 びIEEE1394の高速差動伝送のノイズ除去。 形名表記法 ORDERING CODE 1 3 4 5 形式 形状 試作番号 包装記号 CM BU コモンモードチョークコイル RC MC テーピング品 T 2 6 コアの長辺寸法 f ㎜ g 当社管理番号 04 05 3.5 5.0 C M 標準品 Q QWスペース 0 1 4 R 2 C 0 3 1 T Z 5 6 4 1 3 4 5 Type Shape Product classification code Packaging CM BU Common mode choke coils RC MC Surface mount type T 01 to 13 Taped products 2 6 Dimensions of Core(dia.)fmmg Internal code 04 05 366 01 〜 13 面実装タイプ 3.5 5.0 Q Standard Products QWBlank space 外形寸法 EXTERNAL DIMENSIONS BU05MC h2 Linesi type BU05MC h3 Linesi type 5 CM04RC h4 Linesi type FERRITE PRODUCTS CM04RC h3 Linesi type fThing CM04RC h3 Linesi type CM04RC h2 Linesi type 公差のない数値は参考値です。 The values without tolerance are for reference only. アイテム一覧 PART NUMBERS CM04RCタイプ 形名 ライン数 Ordering code No. of Lines インピーダンス Impedance [E] ftypicalg 直流抵抗 DC resistance [E] fmax.g 定格電流 Rated current [A] fmax.g CM04RC01T 800 fat 100MHzg 0.06 1.5 CM04RC03T 500 fat 480MHzg 0.06 2.0 CM04RC04T 900 fat 15MHzg 0.1 1.0 500 fat 160MHzg 0.06 2.5 270 fat 200MHzg 0.03 3.0 CM04RC10T 100 fat 200MHzg 0.02 4.0 CM04RC02T 1000 fat 100MHzg 0.18 0.5 1000 fat 200MHzg 0.2 0.5 800 fat 100MHzg 0.2 0.5 直流抵抗 DC resistance [E] fmax.g 定格電流 Rated current [A] fmax.g CM04RC07T 2 CM04RC09T CM04RC08TfTHINg CM04RC05T 3 4 定格電圧 Rated voltage [V] fD.C.g 絶縁抵抗 Insulation resistance [ME] fmin.g 50 100 定格電圧 Rated voltage [V] fD.C.g 絶縁抵抗 Insulation resistance [ME] fmin.g 50 100 BU05MCタイプ 形名 Ordering code ライン数 No. of Lines BU05MC01T 1000 (at 60MHz) BU05MC03T BU05MC05T インピーダンス Impedance [E] ftypicalg 2 0.12 1 600 (at 100MHz) 0.10 1.5 1700 (at 130MHz) 0.12 1 BU05MC07T 1200 (at 250MHz) 0.11 1 BU05MC13T 1000 (at 200MHz) 0.06 1 1000 (at 150MHz) 0.15 0.5 700 (at 60MHz) 0.11 0.5 800 (at 350MHz) 0.09 0.5 BU05MC02T BU05MC08T 3 BU05MC11T セレクションガイド Selection Guide P.10 アイテム一覧 Part Numbers P.367 特性図 Electrical Characteristics P.368 梱包 Packaging P.369 信頼性 Reliability Data P.390 使用上の注意 Precautions P.398 etc 367 特性図 ELECTRICAL CHARACTERISTICS インピーダンス周波数特性例 Impedance -vs- Frequency characteristicsfMeasured by HP4291Ag コモンモード ノーマルモード 368 梱包 PACKAGING 1標準数量 Standard quantity 4リール寸法 Reel size 標準数量 fpcs.g Standard quantity Type テーピング Taping CM04RC [2 Lines] type 1500 CM04RC [3 Lines] type 1000 CM04RC [3 Lines] type (Thin) 2500 CM04RC [4 Lines] type 1000 BU05MC [2 Lines] type 2500 BU05MC [3 Lines] type 2500 5 CM04RC BU05MC A B C B100M1 B330M2 18M1.5 fB3.94M0.039g fB12.99M0.079g f0.709M0.059g B80M1 B330M2 13.5M1 fB3.15M0.039g fB12.99M0.079g f0.53M0.039g UnitDmmfinchg FERRITE PRODUCTS Type 2テーピング材質 Tape Material 3リーダー部Y空部 Leader and Blank Portion Type リーダー部 Leader 空部 （リーダー部側） Blank portions (Leader side) 空部 （チップ挿入部側） Blank portions (Chip cavity side) CM04RC 150(5.89) 80(3.14) 80(3.14) BU05MC 150(5.89) 80(3.14) 80(3.14) UnitDmmfinchg 369 梱包 PACKAGING エンボステープ fCM04RCタイプg Embossed tape fCM04RC typeg f1g 8mm pitch (0.31 inches pitch) Type CM04RC 挿入ピッチ ライン数 Insertion Lines pitch チップ挿入部 Chip cavity A B テープ厚み Tape thickness K T 2 8.0M0.1 5.7M0.1 9.65M0.1 5.2max 0.4M0.05 3 12.0M0.1 9.8M0.1 7.7M0.1 5.0max 0.38M0.05 8.0M0.1 3 (THIN) 4 BU05MC 2 BU05MC 3 9.8M0.1 3.1max 0.4M0.05 12.0M0.1 10.3M0.1 10.3M0.1 5.7M0.1 5.0max 0.3M0.05 8.0M0.1 3.2M0.1 0.4M0.05 5.35M1.5 5.7M0.2 f2g 12mm pitch (0.472 inches pitch) 6トップテープ強度 Top Tape Strength トップテープのはがし力は、下図矢印方向にて0.1V0.7Nとなります。 The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illutrated below. エンボステープ fBU05MCタイプg Embossed tape fBU05MC typeg 370 1/4 RELIABILITY DATA Specifled Value Item 1.Operating Temperature Surface Mount High current inductors 08 Type K25CVJ85C Surface Mount High current inductors 04/05/06 Type CommonMode Choke Coils CM04RC CommonMode Choke Coils BU05MC Test Method and Remarks Balun Transformers BU05MC K25VJ105C Including self-generated heat Range 2.Storage Temperature K40CVJ85C Commom mode choke coil Balun transformersD Range 3.Rated current K5 to J40C in taped packaging Within the specification Within the specified tolerance MSD inductorD The maximum DC value having inductance decrease within specified value and temperature increase within Inductance decrease 04 05 06 30L 20L 10L Commom mode choke coilD The maximum DC value having temperature increase within specified temperature,as detailed in individual specification. Within the specified tolerance 4.Impedance Commom mode choke coilD Measuring equipmentDHP 4291A or its equivalent 5 FERRITE PRODUCTS 40C by the application of DC bias. Measuring frequencyDSpecified frequency 5. Inductance Within the specified tolerance Refer to individual SMD inductorD specification Measuring equipmentDHP 4284A or its equivalent Measuring frequencyD1kHz Measuring voltageD1V osc. Measurement in series connection 6.DC Resisitance Within the specified tolerance SMD transformer・SMD inductor・Commom mode choke coilD 7.Self resonance frequency Within the specification SMD inductorD Measuring equipmentDDC ohmmeter Measuring equipmentDImpedance analyzer fHP 4191A, 4192Ag or its equivalent 8.Temperature characteristic 04, 05, 06 TypeDWithin M10L SMD inductorD 08TypeDWithinM5L Change of maximum inductance deviation in step 1 to 5 Temperature at step 1 20C Minimum operating Temperature at step 2 temperature Temperature at step 3 20C fStandard temperatureg Maximum oparating Temperature at step 4 temperature Temperature st step 5 9.Resisitance to flexure of substrare Can satisfy the conditions of the chart at right. 20C Commom mode choke coilD Accoding to JIS C0051 CM04RCYBU05MC Warp 3mm Pressing speed Duration 0.5mm/sec. 5M1sec. Pressig jig Board 391 2/4 RELIABILITY DATA Specifled Value Item 10.Standard donndityonn Surface Mount High current inductors 08 Type Surface Mount High current inductors 04/05/06 Type CommonMode Choke Coils CM04RC CommonMode Choke Coils BU05MC Test Method and Remarks Balun Transformers BU05MC Note on standard condition: "standard condition" referred to herein is defined as follows: 5 to 35C of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure. When there are questions conceming measurement results: In order to provide correlation data, the test shall be conducted under condition of 20M2C of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure. 5 Unless otherwise specified, all the tests are conducted under the "standard condition." 100ME min. SMD inductorD between wires Applied voltageD100VDC DurationD60sec. Commom mode choke coilD Applied voltageDRated voltage DurationD60 sec. 12.Insulation resistanceD 100ME min. SMD inductorD between wire and core Applied voltageD100VDC DurationD60sec. 13.Rated current Within the specification 14.Withstanding voltageD No abnormality between wires FERRITE PRODUCTS 11.Insulation resistanceD Commom mode choke coilD Applied voltageDRegulation voltage DurationD60 sec. 15.Withstanding voltageD No abnormality SMD inductorD between wire and core Applied voltageD500VAC DurationD60 sec. 16.Adhesion of terminal elec- No abnormality SMD inductorD trode Set testing jigs perpendicularly to top surface of specimen mounted on printed board, and apply specified static load for 5 sec. Specified static load Type static load N08DP 10N NP04S N06D 5N NP06D 17.Resisitance to vibration Impedance changeDWithinDM5L Refer to individual specification. SMD inductor, Commom mode choke coilD Accoding to JIS C0040 DirectionsD2 hrs each in X, Y, and Z directions. TotalD6 hrs Frequency rangeD10 to 55 to 10 Hz f1 min.g AmplitudeD1.5mm fShall not exceed acceleration 196m/s2g Mounting methodDsoldering onto printed board RecoveryDAt least 2 hrs of recovery under the standard condition after the test,followed by the measurement within 24 hrs. A kind of vibrationDA 18.Solderability 95L or more of mounting terminal side At least 75L of terminal electrode is shall be covered with tresh solder. covered by new solder. SMD inductor Solder temperatureD230M5C DurationD2M0.5 sec. Immersion depthDAll sides of mounting terminal shall be immersed. Commom mode choke coilD CM04RCYBU05MC Solder temperature 235M5C Duration 2M0.5 sec. Immersion depth Up to 0.5mm from terminal root 393 3/4 RELIABILITY DATA Specifled Value Item 19.Resisitance to soldering Surface Mount High current inductors 08 Type Surface Mount High current inductors 04/05/06 Type No abnormality CommonMode Choke Coils CM04RC CommonMode Choke Coils BU05MC Refer to individual specification. Test Method and Remarks Balun Transformers BU05MC SMD inductor (Reflow soldering) Temperature range heat 150V180C 180Cmin 200Cmin Peak temperature 230Cmax Duration 110sec max 40sec max 30sec max 5 condition after the rmoval from test chamber, followed by the measurement within 24 hrs. Commom mode choke coilD ① Reflow soldering PreheatingD100 to 150C 1 to 2min. FERRITE PRODUCTS RecoveryDAt least 2 hrs of recovery under the standard PeakD230 to 240C Within 5sec. More than 200C Within 40 sec. Number of reflowDWithin 2 times. ② Manual soldering Solder temperatureD350M5C DurationD3M1sec. RecoveryD1 to 2 hrs of recovery under the standard condition after the test. 20.Thermal shock Inductance changeDWithinDM10L Refer to individual specification. SMD inductor Accoding to JIS C0025 SMD inductorf08 typeg Conditions of 1 cycle Step 1 2 3 4 TemperaturefCg Durationfming K25J0 K3 30M3 Room temperature Within 3 J2 30M3 J85K0 Room temperature Within 3 SMD inductorf04, 05, 06 typeg Conditions of 1 cycle Step 1 2 3 4 TemperaturefCg K25J0 K3 Room temperature J105J2 K0 Room temperature Durationfming 30M3 Within 3 30M3 Within 3 Number of cycyleD10 cycles RecoveryDAt least 2 hrs of recovry under the standard condition after the removal from test chamber, followed by the measurement within 24 hrs. Commom mode choke coilD Accoding to JIS C0025 Conditions of 1 cycle TemperaturefCg CM04RCYBU05MC Durationfming 1 K25M3C 2 Room temperature 30M3 3 3 85M2C 30M3 4 Room temperature 3 Number of cycyleD10 cycles RecoveryD1V2 hrs of recovery under the standard condition after removal from test chamber. 395 4/4 RELIABILITY DATA Specifled Value Item Surface Mount High current inductors 08 Type Surface Mount High current inductors 04/05/06 Type 21.Damp heat fsteady stateg CommonMode Choke Coils CM04RC CommonMode Choke Coils BU05MC Refer to individual specification. Test Method and Remarks Balun Transformers BU05MC Commom mode choke coilD CM04RCYBU05MC Temperature 40M2C Humidity 90V95L Duration 1000M24 5 Inductance changeDWithinDM10L Refer to individual specification. SMD inductorD Temperature D40M2C HumidityD90V95L Applied currentDRated current DurationD240M2hrs RecoveryDAt least 2 hrs of recvery under the standard condition after rhe removal from test chamber, FERRITE PRODUCTS 22.Loading under damp heat followed by the measurement within 24 hrs. Commom mode choke coilD CM04RCYBU05MC Temperature 40M2C Humidity 90V95L Applied current Rated current Duration 1000M24 RecoveryD1V2 hrs of recovery under the standard condition after the removed from test chamber 23.High temperature life test Inductance changeDWithinDM10L Refer to individual specification. SMD inductorD Temperature D SMD inductorD105M3C DurationD SMD inductorD240M2hrs RecoveryDAt least 2 hrs of recvery under the standard condition after rhe removal from test chamber, followed by the measurement within 24 hrs. Commom mode choke coilD CM04RCYBU05MC Temperature 85M2C Duration 1000M24 RecoveryD1V2 hrs of recovery under the standard condition after the removed from test chamber 24.Low Temperature life Test Inductance changeDWithinDM10L Refer to individual specification. SMD inductorD Temperature DK40M3C DurationD SMD inductorD240M2hrs RecoveryDAt least 2 hrs of recvery under the standard condition after rhe removal from test chamber, followed by the measurement within 24 hrs. Commom mode choke coilD CM04RCYBU05MC Temperature K40M3C Duration 1000M24 RecoveryD1V2 hrs of recovery under the standard condition after the removed from test chamber 397 PRECAUTIONS SMD Inductors，CM04RC，BU05MC Stages 1.Circuit Design Precautions Technical considerations Operating environment, 1.The products described in this specification are intended for use in general equipment, electronic equipment,(office telecommunications systems, supply measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support 5 systems,) where product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Land pattern design 1.Please contact any of our offices for a land pattern, and refer to a recommended land pattern of specifications. 3.Considerations for automatic placement Adjustment of mounting machine 1.Excessive impact load should not be imposed on the products when mounting onto the PC boards. 1. When installing products, care should be taken not to apply distortion stress as it may deform the products. 2.Mounting and soldering conditions should be checked beforehand. 4.Soldering Reflow soldering 1.Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified. 1.If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of the products. FERRITE PRODUCTS Sales Department in advance. 2.PCB Design 2.This products is reflow soldering only. 3.SMD Inductors Please do not add any stress to a product until it returns in normal temperature after reflow soldering. Lead free soldering 1.When using products with lead free soldering, we request to use them after confirming of adhesion, temperature of resistance to soldering heat, soldering etc sufficiently. Recommended conditions for using a soldering iron: Put the soldering iron on the land-pattern. Soldering iron's temperature - Below 350 ℃ Duration - 3 seconds or less The soldering iron should not directly touch the inductor. 5.Cleaning Cleaning conditions 1.SMD Inductors Please contact any of our offices for a cleaning, 6.Handling Handling 1.Keep the product away from all magnets and magnetic 1.There is a case that a characteristic varies with magnetic influence. objects. Breakaway PC boards (splitting along perforations) 1.When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or 1.Planning pattern configurations and the position of products should be carefully performed to minimize stress. twisting to the board. 2.Board separation should not be done manually, but by using the appropriate devices. Mechanical considerations 1.Please do not give the product any excessive mechanical 1.There is a case to be damaged by a mechanical shock. shocks. 2.SMD Inductors 2.SMD Inductors Please do not add any shock and power to a product in There is a case to be broken by the handling in transportation. transportation. Pick-up pressure 1.SMD Inductors 1.SMD Inductors Please do not push to add any pressure to a winding part. Damage and a characteristic can vary with an excessive shock or stress. Please do not give any shock and push into a ferrite core exposure part. Packing 1.SMD Inductors Please avoid accumulation of a packing box as much as 7.Storage conditions 1.There is a case that transformation and a product of tape are damaged by accumulation of a packing box. possible. Storage 1.To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled.. ・Recommended conditions solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place. Ambient temperature Humidity 1. Under a high temperature and humidity environment, problems such as reduced 0〜40℃ Below 70% RH The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product should be used within one year from the time of delivery. In case of storage over 6 months, solderability shall be checked before actual usage. 399