Seme LAB BUX54 Npn silicon transistor Datasheet

BUX54
MECHANICAL DATA
Dimensions in mm(inches)
NPN SILICON
TRANSISTOR
8.51 (0.34)
9.40 (0.37)
7.75 (0.305)
8.51 (0.335)
6.10 (0.240)
6.60 (0.260)
FEATURES
12.70
(0.500)
min.
0.89
max.
(0.035)
• FAST SWITCHING
0.41 (0.016)
0.53 (0.021)
dia.
• HIGH PULSE POWER
5.08 (0.200)
typ.
2.54
(0.100)
2
1
3
0.74 (0.029)
1.14 (0.045)
APPLICATIONS
• POWER SWITCHING CIRCUITS
0.71 (0.028)
0.86 (0.034)
• MOTOR CONTROL
45°
TO39 (TO-205AD)
Pin 1 = Emitter
Pin 2 = Base
Pin 3 = Collector
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
VCBO
Collector – Base Voltage
450V
VCEX
Collector – Emitter Voltage (VBE= -1.5V)
450V
VCEO
Collector – Emitter Voltage
400V
VEBO
Emitter – Base Voltage
7V
IC
Collector Current
2A
ICM
Peak Collector Current (tp = 10 ms)
5A
IB
Base Current
Ptot
Total Power Dissipation at Tcase ≤ 25°C
Tj,Tstg
Maximum Junction And Storage Temperature Range
0.375A
10W
-65°C to +200°C
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 5725
Issue 1
BUX54
ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated)
Parameter
VCEO(sus)
ICEX
VCE(sat)*
VBE(sat)*
Test Conditions
Collector - Emitter Sustaining
IC = 200mA
Voltage
L = 25mH
Collector Emitter Cut-off
VCE = 450V
Current
IB = 0A
Min.
Typ.
Max. Unit
V
400
VBE = –1.5V
0.1
TC = 125°C
0.5
Collector – Emitter
IC = 0.6A
IB = 0.06A
0.5
Saturation Voltage
IC = 1.2A
IB = 0.15A
1.3
IC = 1.2A
IB = 0.15A
1.5
Base – Emitter
Saturation Voltage
ft
Transition Frequency
td + tr
Turn–On Time
tf
Fall Time
ts
Carrier Storage Time
VCE = 10V
IC = 0.2A
f = 5MHz
IC = 1.2A
IB1 =0.15A
IB2 - 0.15A
IC = 1.2A
V
V
MHz
8
0.25
IB = 0.15A
IC = 1.2A
mA
IB1 =0.15A
IB2 - 0.15A
1.2
µs
3.5
*Pulsed tp =300µs @< 1%
THERMAL CHARACTERISTICS
RθJCJunction to Case Thermal Resistance
17.5
°C/W
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 5725
Issue 1
Similar pages