EC29 Series EC29 • RoHS Compliant (Pb-Free) • LVHCMOS output • 1.8V Supply Voltage • Ceramic SMD package • Stability to 20ppm • Standby Function • Available on Tape and Reel H 1.6 L 7.0 W 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range (FO) Operating Temperature Range (OTR) Storage Temperature Range (STR) Supply Voltage (VDD) Input Current (IDD) Frequency Tolerance/Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time (TR/TF) Duty Cycle (SYM) Load Drive Capability (CLOAD) Tri-State Input Voltage Standby Current Start Up Time (TS) RMS Phase Jitter 1.544MHz to 80.000MHz and 98.304MHz, 100.000MHz, 106.250MHz, 110.000MHz, 125.000MHz 0°C to 70°C -40°C to 85°C -55°C to 125°C 1.8VDC ±5% 2mA Maximum 1.544MHz to 10.000MHz 3mA Maximum 10.001MHz to 25.000MHz 4mA Maximum 25.001MHz to 40.000MHz 8mA Maximum 40.001MHz to 50.000MHz 10mA Maximum 50.001MHz to 70.000MHz 18mA Maximum 70.001MHz to 100.000MHz 20mA Maximum 100.001MHz to 110.000MHz 25mA Maximum 110.001MHz to 125.000MHz ±100ppm, ±50ppm, ±25ppm, or Inclusive of all conditions: Calibration Tolerance at 25°C, ±20ppm Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration IOH=-2.8mA, 1.544MHz to 40.000MHz 90% of VDD Minimum IOH=-8mA, 40.001MHz to 125.000MHz 90% of VDD Minimum IOL=2.8mA, 1.544MHz to 40.000MHz 10% of VDD Maximum IOL=8mA, 40.001MHz to 125.000MHz 10% of VDD Maximum < 40.000MHz 10% to 90% of Waveform 6 nSeconds Maximum > 40.000MHz 10% to 90% of Waveform 3 nSeconds Maximum at 50% of Waveform 50 ±10(%) (Standard) at 50% of Waveform 50 ±5(%) (Optional) 15pF HCMOS Load Maximum Enables Output No Connection Enables Output VIH: >90% of VDD Disables Output: High Impedance VIL: <10% of VDD 10µA Maximum Disabled Output: High Impedance, 1.544MHz to 40MHz 100µA Maximum Disabled Output: High Impedance, 40.001MHz to 70MHz 10µA Maximum Disabled Output: High Impedance, 70.001MHz to 125MHz 10 mSeconds Maximum 1pSeconds Maximum 12kHz to 20MHz offset frequency MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC29 CERAMIC 1.8V OS1B 01/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC29 00 ET T TS - 30.000M TR PACKAGING OPTIONS Blank=Bulk (Standard) TR=Tape and Reel FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum, 25=±25ppm Maximum 20=±20ppm Maximum FREQUENCY OPERATING TEMPERATURE RANGE Blank=0°C to 70°C (Standard) ET=-40°C to 85°C DUTY CYCLE Blank=50 ±10(%) (Standard) T=50 ±5(%) MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State Pin 2: Case Ground TAPE AND REEL DIMENSIONS Pin 3: Output Pin 4: Supply Voltage Tolerances= +0.1 ALL DIMENSIONS IN MILLIMETERS A B C D E 16±.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1 TAPE F G H J K 8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 REEL L K0* R S T U V 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 1: ECLIPTEK Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC29 CERAMIC 1.8V OS1B 01/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. Ecliptek MEMS Oscillators - Lower Cost, Quicker Delivery Alternative! The EMO™ family of oscillators offers exceptional performance, shorter delivery and significant cost advantages by utilizing a revolutionary new MEMS resonator technology. This important innovation enables Ecliptek to offer the ultimate in flexibility with delivery of 2 days for samples and 5 to 10 days for quantities up to 10,000 pieces on tape and reel. Package Dimensions (all dimensions in millimeters) Supply Voltage (VDC) 5x7 3.2 x 5 2.5 x 3.2 2 x 2.5 1.8 EMK11 EMK21 EMK31 EMK41 2.5 EMK12 EMK22 EMK32 EMK42 3.3 EMK13 EMK23 EMK33 EMK43 Would you like to request EMO™ samples or a quotation now? Click Here Want to learn more about the Ecliptek EMO™ family of MEMS oscillators? Click Here Product Features: • • • • • • • • • Improved frequency stability through the use of a MEMS resonator 1.8VDC, 2.5VDC, or 3.3VDC supply voltages Frequency range of 1MHz to 125MHz, HCMOS output Frequency stability to ±50ppm, -40°C to +85°C operation Tri-state or power down functions RoHS compliant High temperature +260°C reflow capability EIA compliant tape and reel packaging Four SMD package sizes If you have any questions or would like additional information regarding the Ecliptek EMO™ family of oscillators, please contact our Sales Department.