Purdy AND123R Standard led Datasheet

AND123R
Standard Bright LED LAMPS
Weight: 0:30 g
Unit: mm
AND123R
Standard LED
T-1 Package (3 mm)
ø3.8 ± 0.2
ø3.1 ± 0.2
4.0
Features
5.0
1.0
2.1 max
Optical Characteristics (Ta = 25°C)
25.5
0.5
1.5
Part
Number
1.5
0.5
AND123R
2.54
Color
LED
Lens
Red
Red
Lens
Desc.
Axial Luminous
Intensity (mcd)
Clear
Min.
Typ.
Test
Condition
(IF–mA)
5
12
10
Viewing
Angle
2θ1/2
(deg)
50
Absolute Maximum Ratings (Ta = 25°C)
0.5
1
• RoHS Compliant
• Low power requirement
• Stand-off or flush-mount
• All plastic molded lens
• Color: GaP–Red
2
Characteristics
1. Anode
2. Cathode
Symbol
Rating
Unit
Forward Current (DC)
IF
25
mA
Reverse Voltage
VR
5
V
PD
120
mW
Operating Temperature
TOpr
-40 to +85
°C
Storage Temperature Range
TStg
-40 to +85
°C
Power Dissipation
Electro-Optical Characteristics (Ta = 25°C)
Red
Characteristics
Symbol
Test Condition
Unit
Min.
Typ.
Max.
Forward Voltage
VF
IF = 20mA
–
2.0
2.5
V
Reverse Current
IR
VR = 5 V
–
–
10
µA
Peak Emission Wavelength
λp
IF = 15mA
–
700
–
nm
Spectral Line Half Width
λ
IF = 15mA
–
45
–
nm
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead
forming.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
6/14/07
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected]
www.purdyelectronics.com
1
AND123R
Standard LED
Standard Bright LED LAMPS
IF vs. VF
50
Radiation Pattern
TA = 25°C
Forward Current IF (mA)
30
20°
20
10°
0°
10°
20°
30°
30°
40°
10
40°
50°
50°
60°
60°
5
70°
70°
3
80°
80°
2
90°
1.0
1
1.7
1.8
1.9
2.0
2.1
Forward Voltage VF (V)
2.2
0.8
0.4
0.2
0
0.2
0.4
0.6
0.8
90°
1.0
2.3
IV vs. IF
5
0.6
Relative Luminous Intensity – Wavelength
2
Relative Luminous Intensity
Relative Luminous Intensity IV
1.0
1
0.5
0.2
0.1
1
2
5
10
20
0.8
0.6
0.4
0.2
50
0
660
Forward Current IF (mA)
IV vs. TC
Allowable Forward Current IF (mA)
Relative Luminous Intensity IV
2
740
760
IV vs.TA
3
2
1
0.5
0.4
0.3
-20
720
700
680
Wavelength λ (nm)
This graph shows relative luminous vs. forward current.
At three points (IF = 10, 15, 20mA) each relation is normalized.)
0
20
40
60
Case Temperature TC (°C)
80
40
30
20
10
0
0
20
40
60
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected]
www.purdyelectronics.com
80
100
Ambient Temperature TA (°C)
6/14/07
Similar pages