Surface Mount Bandpass Filter 50Ω BPF-C4R5+ 2 to 7 MHz The Big Deal • Low insertion loss • Good VSWR • Miniature shielded package CASE STYLE: HU1186 Product Overview BPF-C4R5+ is a bandpass filter fabricated using SMT technology. This filter offers good rejection and low insertion loss for use in aviation and communication systems. This unit uses a miniature high Q capacitors and wire welded inductors for high reliability. Key Features Feature Advantages Low insertion loss Suitable for high performance applications. Good VSWR, 1.1:1 typical in passband The BPF-C4R5+ has very good VSWR which provides good matching when used with other devices. Shielded package Reduced interference with the surrounding components. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 3 Surface Mount Bandpass Filter 50Ω BPF-C4R5+ 2 to 7 MHz CASE STYLE: HU1186 Features • Low insertion loss • Good VSWR • Miniature shielded package Electrical Specifications at 25°C Parameter Center Frequency Insertion Loss VSWR Insertion Loss VSWR Insertion Loss VSWR Pass Band Applications Stop Band, Lower • Aviation • Communication systems Stop Band, Upper F# Frequency (MHz) Min. Typ. Max. Unit — F1-F2 F1-F2 DC-F3 DC-F3 F4-F5 F4-F5 — 2-7 2-7 DC-0.6 DC-0.6 17-2100 17-2100 20 20 - 4.5 0.5 1.1 35.9 20 28.9 20 1.5 1.5 MHz dB :1 dB :1 dB :1 - Maximum Ratings Functional Schematic RF IN Operating Temperature Storage Temperature RF Power Input -40°C to 85°C -55°C to 100°C 1 W max. Permanent damage may occur if any of these limits are exceeded. RF OUT Typical Performance Data at 25°C Frequency (MHz) FREQUENCY (MHz) F3 F1 F2 F4 F5 INSERTION LOSS (dB) DC INSERTION LOSS (dB) The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Frequency (MHz) Group Delay (nsec) 0.10 88.93 898.07 2.0 250.52 0.60 35.20 293.81 2.2 212.56 0.66 30.30 215.92 2.6 165.56 0.79 20.51 92.29 2.8 150.39 1.08 3.05 4.05 3.0 132.37 1.10 2.43 3.31 3.2 127.88 2.00 0.25 1.06 3.4 123.03 4.50 0.29 1.09 3.6 117.89 7.00 0.49 1.04 3.8 112.44 9.00 1.00 1.34 4.0 107.33 9.90 2.17 2.34 4.2 103.11 10.30 3.21 3.22 4.4 99.60 14.20 20.03 20.48 4.8 94.30 17.00 29.73 25.63 5.0 92.33 17.10 30.03 25.75 5.4 89.40 500.00 99.85 43.88 5.8 87.64 950.00 78.75 35.82 6.2 86.75 1500.00 44.47 12.10 6.6 86.61 1960.00 38.39 2.77 6.8 86.83 2100.00 40.73 2.18 7.0 87.26 BPF-C4R5+ INSERTION LOSS (Full band) 0 +RoHS Compliant VSWR (:1) 20 40 60 0.20 80 0.35 100 0.50 2.00 120 0.1 4.50 1.0 7.00 16 0 3 6 9 FREQUENCY (MHz) 12 15 6 7 BPF-C4R5+ GROUP DELAY 253 225 GROUP DELAY (ns) 1.06 VSWR 8 12 10,000.0 1.12 1.00 100 4 20 10.0 100.0 1,000.0 FREQUENCY (MHz) BPF-C4R5+ VSWR 1000 BPF-C4R5+ INSERTION LOSS (Passband) 0 INSERTION LOSS (dB) Typical Frequency Response Insertion Loss (dB) 2.00 4.50 197 7.00 169 141 10 113 85 1 0.1 1 10 100 FREQUENCY (MHz) 1000 10000 2 3 4 5 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV.OR M156097 BPF-C4R5+. EDU2026 URJ 161122 Page 2 of 3 BPF-C4R5+ Bandpass Filter Pad Connections Outline Drawing INPUT 2 OUTPUT 9 NOT CONNECTED GROUND PCB Land Pattern 6 &13 1,3,4,5,7,8,10,11,12,14 Demo Board MCL P/N: TB-500+ Suggested PCB Layout (PL-294) Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .870 22.10 B .800 20.32 C .25 6.35 D .100 2.54 E .097 2.46 F --- J .105 2.67 K .910 23.11 L --- M .060 1.52 N .060 1.52 P --- G .060 1.52 H .040 1.02 wt grams 2.85 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 3