SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 2000-hours-life, 105℃ MVJ - MVL P91 Series longer life MVJ ・Endurance : 2,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant longer life MVE P70 ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -40 to +105℃ 6.3 to 50Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3µA, whichever is greater. (at 20℃ after 2 minutes) Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) (at 20℃, 120Hz) 0.30 0.24 0.20 0.16 0.14 0.12 tanδ (Max.) 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 2 2 2 2 3 4 Z(-25℃)/Z(+20℃) (at 120Hz) 3 3 4 6 8 12 Z(-40℃)/Z(+20℃) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 105℃. Rated voltage 6.3Vdc 10 & 16Vdc 25 to 50Vdc Capacitance change ≦±30% of the initial value ≦±25% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦300% of the initial specified value ≦300% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3Vdc 10 & 16Vdc 25 to 50Vdc Capacitance change ≦±30% of the initial value ≦±25% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦300% of the initial specified value ≦300% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value ≦The initial specified value ◆DIMENSIONS [mm] ●Terminal ◆PART NUMBERING SYSTEM Code : A 1 2 3 4 5 6 7 8 9 10 L 5.7 5.7 5.7 A±0.2 A 4.3 5.3 6.6 14 ◆MARKING 15 16 17 EX) 6.3V100µF 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,10µF:100) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category P C±0.2 B±0.2 φD±0.5 0.3max. L±0.3 D 4 5 6.3 13 E MV J AAA A DA AAA M AAA G W Size code D60 E60 F60 11 12 B 4.3 5.3 6.6 C 5.1 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.0 1.4 1.9 7hJ 100 6.3V Please refer to "Product code guide (surface mount type)" ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (µF) 22 47 100 33 10 22 47 33 Size code tanδ Rated ripple current (mArms/ 105℃,120Hz) D60 E60 F60 E60 D60 E60 F60 F60 0.30 0.30 0.30 0.24 0.20 0.20 0.20 0.16 21 36 56 34 16 30 48 45 WV (Vdc) Part No. EMVJ6R3ADA220MD60G EMVJ6R3ADA470ME60G EMVJ6R3ADA101MF60G EMVJ100ADA330ME60G EMVJ160ADA100MD60G EMVJ160ADA220ME60G EMVJ160ADA470MF60G EMVJ250ADA330MF60G 35 50 Cap (µF) Size code tanδ Rated ripple current (mArms/ 105℃,120Hz) 4.7 10 22 1.0 2.2 3.3 4.7 10 D60 E60 F60 D60 D60 D60 E60 F60 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 15 25 40 5.6 10 14 19 29 Part No. EMVJ350ADA4R7MD60G EMVJ350ADA100ME60G EMVJ350ADA220MF60G EMVJ500ADA1R0MD60G EMVJ500ADA2R2MD60G EMVJ500ADA3R3MD60G EMVJ500ADA4R7ME60G EMVJ500ADA100MF60G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) Capacitance(μF) 1.0 2.2 to 10 22 to 100 120 1k 10k 100k 1.00 1.00 1.00 1.50 1.30 1.05 1.75 1.40 1.08 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 93 CAT. No. E1001N