Hirose DF3A-14EP-2R26 2mm pitch connector for discrete wire connection(product approved by ul csa standard) Datasheet

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
DF3 Series
■Features
Correspond to Board Design in Wide Variation
●ID Socket
(1) Low profile design with the mounting height of 6.8mm
(2) Achieves the multi-harness by the full automatic ID machine in combination with the DF11 series ID
type.
(DF11 series represents the 2mm pitch single-row product.Please refer to page A266 to A277.)
●Crimp Socket
(1) Low profile design with mounting height 7.5mm.
(Please refer to the application pattern figure on page A256 for details.)
(2) Provide the contact crimping area with the sufficient space, and secures the stable crimping
operation.
●Receptacle
(1) The board can be connected horizontally or vertically in combination with the straight header with the
right angle header.
(2) For horizontal connection, the board to board size is the low profile of 6.6mm.
(Please refer to the application pattern on page A256 for details.)
(3) Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and
the cable side to the plug in the board to cable connection.
●Pin Header
(1) The board pre-fixed kink is treated with the post pin.
(2) The style employs a scoop-proof and sturborn box type.
(3) The type corresponding to SMT is avilable, using the heat-proof resin.
This SMT header is equipped with the metal tab to prevent peeling in the solder joint area.
●In-line Plug
(1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and
the other employs the panel lock type, which can be fixed to the panel.
(2) The in-line adapter is available to insert and in-line the ID socket from both sides.
■Applications
Business equipment such as copy machine and printer
A254
BEmbossed Carrier Tape Dimensions
Unit: mm
Product Type
Size
DF3/3D-*P-2H
Number of Contacts
A
B
C
D
2 to 4
5 to 7
24
–––
11.5
24.4
32
28.4
14.2
32.4
8 to 12
44
40.4
20.2
44.4
13 to 15
56
52.4
26.2
56.4
BPrecautions
1. Recommended Temperature Profile (SMT)
Note1: Maximum twice action is allowed under the same condition. However, the interval between
the first and second actions must be maintained at room temperature.
Note2: The temperature indicates the board surface temperature on the connector lead area.
2. Recommended Manual Soldering Condition (SMT) Soldering iron temperature: 290±10ç, Soldering time: Within 2 seconds
3. Recommended Screen Thickness (SMT) 0.15 to 0.2mm
4. Board Warpage (SMT)
5. Recommended Soldering Condition (DIP)
Based on both connector edges, 0.03mm max. in the connector center portion
■Flow Condition with Automatic Soldering Tool. Soldering temperature: 250±5ç, Soldering time: Within 3 seconds
■Manual Soldering Condition. Soldering iron temperature: 290±10ç, Soldering time: Within 2 seconds
6. Cleaning Condition
Refer to the "Nylon Connector Use Hand book".
7. Connection Condition
Refer to the "Nylon Connector Use Hand book".
A265
■Product Specifications
AWG 22 to 24:3A
Current rating
Rating
Crimping
Wire size
Note 1
IDC
Voltage rating AC100V Crimping
Wire size
AWG 26
:2A
AWG 28
:1A
AWG 26, 28:1A
Press-fit: 250V AC
IDC
Operating Temperature Range -30ç to +85ç Note 2.
Operating Humidity Range
Storage Temperature Range -10ç to +60ç Note 3.
Press-connect: 100V AC
Storagg Humidity Range
UL-CSA Safety Standard and Approved specification
Rated Current
Wire size
Rating
Rated Voltage
AWG 24 to 28: 1A
30V AC
Item
40% to 70%
■UL CSA Safety Standard File No.
UL
:E52653
CSA
:LR95109
■UL CSA Acquisition Objective Item
1DF3-*S-2C
2DF3/3A-*P-2DSA/DS
3DF3/DF3AA-*EP-2C
4DF3-*S-2R26/28
5DF3-*P-2H
Specification
Condition
1. Insulation Resistance
1000M ohms min.
500V DC
2. Withstanding voltage
No flashover or insulation breakdown.
650V AC/1 minute
3. Contact Resistance
30m ohms max
100mA
4. Single Insertor/Extraction Force MIN0.3N (30gf), MAX4.4N(450gf)
5. Vibration
40% to 80%
Measure by the square steel pin with 0.5±0.002mm
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 500M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
7. Temperature Cycle
(-55ç: 30 minutes 5 to 35ç: 10 minutes 85ç: 30 minutes 5 to 35ç: 10minutes) 5 cycles
Contact resistance: 30m ohms max.:Insulation resistance: 1000M ohms min.
8. Durability (Mating/un-mating) Contact resistance: 30m ohms max.
Tin plating: 30 cycles Gold plating: 50 cycles
9. Resistance to Soldering Heat No deformation of components affecting performance.
Flow: 250ç for 10 seconds Manual soldering: 300ç for 2 seconds
Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Material
Product
Part
Materia
Finish
Remarks
Crimping Socket
Insulator
Polyamide
Black
UL94V-0
IDC Contact for Socket
ID Socket
Receptacle
Pin Header
SMT Pin Header
In-line Plug
In-line IDC Contact
In-line Adapter
Contact
Phosphor bronze
Tin plated or gold plated
–––––––
Insulator
Polyamide
Black
UL94V-0
Contact
Phosphor bronze
Tin plated or gold plated
–––––––
Insulator
Polyamide
Black
UL94V-0
Contact
Phosphor bronze
Tin plated or gold plated
–––––––
Insulator
Polyamide
Black
UL94V-0
Contact
Brass
Tin plated or gold plated
–––––––
Insulator
Polyamide
Beige
UL94V-0
Contact
Phosphor bronze
Tin plated or gold plated
–––––––
Metal tab
Brass
Tin plated
–––––––
Insulator
Polyamide
Black
UL94V-0
Contact
Phosphor bronze
Tin plated or gold plated
–––––––
Insulator
Polyamide
Black
UL94V-0
Contact
Brass
Tin plated
–––––––
Note:HRS's tin plating takes actions against whisker.
A255
■Ordering Information
●Connector
DF 3 - * S - 2C
q
w
q Series Name
: DF
w Series No.
: 3, 3A, 3AA
e
r
t y
y Connection Form/Contact Style
C
e Number of Contacts : 2~15
: Crimp socket
R26 : ID socket for AWG26
r Connector Type
R28 : ID socket for AWG28
S
: Socket
DSA : Straight through hole
P
: Pin Header
DS : Right angle through hole
EP
: In-line Plug
V
: Straight SMT
: 2mm
H
: Right angle SMT
A
: Adapter
t Contact Pitch
●Contact
DF3 - EP2428PCFA
q
q Contact Type
e
r
e Contact Type/Packaging Type
NONE : For socket
SCF
EP
SC
: Socket contact, Bag
PCF
: Plug contact, Embossed tape
PC
: Plug contact, Bag
: For in-line plug
w Applicable Wire Size
22
: AWG22
2428 : AWG24 to 28
■Application pattern
A256
w
: Socket contact, Embossed tape
r Plating Type
Blank
: Tin plated
A
: Gold plated
C
: Gold plated
■ID Socket
[Specific No.]–* *, (* *)
Blank
: Tin plated, 100 pieces per bag
(01)
: Gold plated, 100 pieces per bag
(20)
: Tin plated, Tube packaging
This picture shows the cable
assembled status.
Note 1.
Mark to determine the socket name
Mark6: R26, Mark8: R28
●AWG28
Unit: mm
Number of
Tube packaging
Number of
A
B
A
B
Part Number
CL No.
Part Number
CL No.
Contacts
Quantity
Contacts
DF3- 2S-2R26(**)
543-0078-7-**
2
6
2 190 pieces
DF3- 2S-2R28(**)
543-0092-8-**
2
6
2
DF3- 3S-2R26(**)
543-0079-0-**
3
8
4 142
DF3- 3S-2R28(**)
543-0093-0-**
3
8
4
DF3- 4S-2R26(**)
543-0080-9-**
4
10
6 114
DF3- 4S-2R28(**)
543-0094-3-**
4
10
6
DF3- 5S-2R26(**)
543-0081-1-**
5
12
8 094
DF3- 5S-2R28(**)
543-0095-6-**
5
12
8
DF3- 6S-2R26(**)
543-0082-4-**
6
14
10 080
DF3- 6S-2R28(**)
543-0096-9-**
6
14
10
DF3- 7S-2R26(**)
543-0083-7-**
7
16
12 070
DF3- 7S-2R28(**)
543-0097-1-**
7
16
12
DF3- 8S-2R26(**)
543-0084-0-**
8
18
14 062
DF3- 8S-2R28(**)
543-0098-4-**
8
18
14
DF3- 9S-2R26(**)
543-0085-2-**
9
20
16 056
DF3- 9S-2R28(**)
543-0099-7-**
9
20
16
DF3-10S-2R26(**)
543-0086-5-**
10
22
18 052
DF3-10S-2R28(**)
543-0100-4-**
10
22
18
DF3-11S-2R26(**)
543-0087-8-**
11
24
20 046
DF3-11S-2R28(**)
543-0101-7-**
11
24
20
DF3-12S-2R26(**)
543-0088-0-**
12
26
22 044
DF3-12S-2R28(**)
543-0102-0-**
12
26
22
DF3-13S-2R26(**)
543-0089-3-**
13
28
24 040
DF3-13S-2R28(**)
543-0103-2-**
13
28
24
DF3-14S-2R26(**)
543-0090-2-**
14
30
26 038
DF3-14S-2R28(**)
543-0104-5-**
14
30
26
DF3-15S-2R26(**)
543-0091-5-**
15
32
28 034
DF3-15S-2R28(**)
543-0105-8-**
15
32
28
Note 2.The quantity for delivery of the specific No. "None" and (01) is determined per bag (100pcs.). If needed, please order
productsper bag.
Note 3.If the Full automatic IDC machine to hit the DF11 single core,the (20) tube packaging specification will be applied.
Note 4.Order the tube packaging product, multiplying the tube packaging quantity (pieces).
●AWG26
Unit: mm
Tube packaging
Quantity
190 pieces
142
114
094
080
070
062
056
052
046
044
040
038
034
the
■Applicable Cable
Part Number
Applicable Cable
Jacket Diameter
DF3-*S-2R26
UL1061 AWG26 (7/0.16)
Ø0.9 to 1mm
DF3-*S-2R28
UL1061 AWG28 (7/0.127)
Ø0.9 to 1mm
■Applicable ID Connection Tool
Type
Part Number
DF11 Single Contact Punching
Full Automatic ID Machine
AM700/DF11
DF3 DF4 Desktop ID Machine
DF3(4)/ID-MO
Connection Type
■ Effective Harness Form
1DF11-Both ended, single ended
2DF11-DF11, Separation
3DF11-DF3, Separation
■ Effective Harness Length
100 to 2,000mm
■ Conduction Inspection Mechanism Installed
DF3 No restriction
DF4 No restriction
Remarks
Connector is the
specification (20).
Tube packaging applied
Desktop machine for small lot
A257
■Crimping Socket
[Specific No.] –* *, (* *)
Blank: 100 pieces per pack
This picture shows the Contact
crimped status.
Unit: mm
Number of Contacts
A
B
DF3-2S-2C(**) 543-0003-8-**
2
06
02
DF3-3S-2C(**) 543-0004-0-**
3
08
04
DF3-4S-2C(**) 543-0005-3-**
4
10
DF3-5S-2C(**) 543-0006-6-**
5
12
DF3-6S-2C(**) 543-0007-9-**
6
DF3-7S-2C(**) 543-0008-1-**
7
Part Number
CL No.
Number of Contacts
A
B
DF3-19S-2C(**) 543-0010-3-**
09
20
16
DF3-10S-2C(**) 543-0011-6-**
10
22
18
06
DF3-11S-2C(**) 543-0012-9-**
11
24
20
08
DF3-12S-2C(**) 543-0013-1-**
12
26
22
14
10
DF3-13S-2C(**) 543-0014-4-**
13
28
24
16
12
DF3-14S-2C(**) 543-0015-7-**
14
30
26
Part Number
CL No.
8
15
18
32
14
28
DF3-8S-2C(**) 543-0009-4-**
DF3-15S-2C(**) 543-0016-0-**
Note1: The product's contact number indicated.
Note2: The quantity for delivery of the specification No. "None" is determined per bag (100 pcs.).
If needed, please order the products per bag.
Note3: A quantity of "500 pieces package" and "1000 pieces package" for delivery is dealt with pieces. Order example: 500, 1000, and 1500 pieces...
■Receptacle
[Specific No.] –* *, (* *)
(20) :Tin plated, Tube packaging
(50) :Gold plated, Tube packaging
Note1: The product's contact number indicated
●Board Through-hole Diameter: Ø0.7++0.1
0
Unit: mm
Part Number
A258
CL No.
Number of Contacts
A
B
Tube Package
Quantity
Part Number
CL No.
Number of Contacts
A
B
Tube Package
Quantity
DF3-2S-2DSA(**) 543-0048-6-**
2
06
02
80 pieces DF3- 9S-2DSA(**) 543-0055-1-**
09
20
16
24 pieces
DF3-3S-2DSA(**) 543-0049-9-**
3
08
04
60
DF3-10S-2DSA(**) 543-0056-4-**
10
22
18
21
DF3-4S-2DSA(**) 543-0050-8-**
4
10
06
48
DF3-11S-2DSA(**) 543-0057-7-**
11
24
20
20
DF3-5S-2DSA(**) 543-0051-0-**
5
12
08
40
DF3-12S-2DSA(**) 543-0058-0-**
12
26
22
18
DF3-6S-2DSA(**) 543-0052-3-**
6
14
10
34
DF3-13S-2DSA(**) 543-0059-2-**
13
28
24
17
DF3-7S-2DSA(**) 543-0053-6-**
7
16
12
30
DF3-14S-2DSA(**) 543-0060-1-**
14
30
26
16
8
18
14 27
DF3-15S-2DSA(**) 543-0061-4-**
DF3-8S-2DSA(**) 543-0054-9-**
Note2: Please order the tube packaging at the multiplied tube packaging quantity (pieces).
15
32
28
15
■Straight Pin Header
●Board Through-hole Diameter: Ø0.8++0.1
0
●Kink Pre-fixed Effective Diameter: Ø0.8++0.05
0
Unit: mm
Tin Plating
Gold Plating
Part Number
CL No.
Part Number
CL No.
543-0165-0
543-0017-2-01
DF3A- 2P-2DSA
DF3- 2P-2DSA(01)
543-0166-2
543-0018-5-01
DF3A- 3P-2DSA
DF3- 3P-2DSA(01)
543-0167-5
543-0019-8-01
DF3A- 4P-2DSA
DF3- 4P-2DSA(01)
543-0168-8
543-0020-7-01
DF3A- 5P-2DSA
DF3- 5P-2DSA(01)
543-0169-0
543-0021-0-01
DF3A- 6P-2DSA
DF3- 6P-2DSA(01)
543-0170-0
543-0022-2-01
DF3A- 7P-2DSA
DF3- 7P-2DSA(01)
543-0171-2
543-0023-5-01
DF3A- 8P-2DSA
DF3- 8P-2DSA(01)
543-0172-5
543-0024-8-01
DF3A- 9P-2DSA
DF3- 9P-2DSA(01)
543-0173-8
543-0025-0-01
DF3A-10P-2DSA
DF3-10P-2DSA(01)
543-0174-0
543-0026-3-01
DF3A-11P-2DSA
DF3-11P-2DSA(01)
543-0175-3
543-0027-6-01
DF3A-12P-2DSA
DF3-12P-2DSA(01)
543-0176-6
543-0028-9-01
DF3A-13P-2DSA
DF3-13P-2DSA(01)
543-0177-9
543-0029-1-01
DF3A-14P-2DSA
DF3-14P-2DSA(01)
543-0178-1
543-0030-0-01
DF3A-15P-2DSA
DF3-15P-2DSA(01)
Note : The quantity for delivery is determined per bag (100 pcs.). If needed, please order the products per bag.
Number of Contacts
A
B
2
3
4
5
6
7
8
9
10
11
12
13
14
15
06
08
10
12
14
16
18
20
22
24
26
28
30
32
02
04
06
08
10
12
14
16
18
20
22
24
26
28
■Right Angle Pin Header
●Board Through-hole Diameter: Ø0.8++0.1
0
●Kink Pre-fixed Effective Diameter: Ø0.8++0.05
0
Unit: mm
Tin Plating
Gold Plating
Part Number
CL No.
Part Number
CL No.
543-0179-4
543-0031-3-01
DF3A- 2P-2DS
DF3- 2P-2DS(01)
543-0180-3
543-0032-6-01
DF3A- 3P-2DS
DF3 -3P-2DS(01)
543-0181-6
543-0033-9-01
DF3A- 4P-2DS
DF3- 4P-2DS(01)
543-0182-9
543-0034-1-01
DF3A- 5P-2DS
DF3- 5P-2DS(01)
543-0183-1
543-0035-4-01
DF3A- 6P-2DS
DF3- 6P-2DS(01)
543-0184-4
543-0036-7-01
DF3A- 7P-2DS
DF3- 7P-2DS(01)
543-0185-7
543-0037-0-01
DF3A- 8P-2DS
DF3- 8P-2DS(01)
543-0186-0
543-0038-2-01
DF3A- 9P-2DS
DF3- 9P-2DS(01)
543-0187-2
543-0039-5-01
DF3A-10P-2DS
DF3-10P-2DS(01)
543-0188-5
543-0040-4-01
DF3A-11P-2DS
DF3-11P-2DS(01)
543-0189-8
543-0041-7-01
DF3A-12P-2DS
DF3-12P-2DS(01)
543-0190-7
543-0042-0-01
DF3A-13P-2DS
DF3-13P-2DS(01)
543-0191-0
543-0043-2-01
DF3A-14P-2DS
DF3-14P-2DS(01)
543-0192-2
543-0044-5-01
DF3A-15P-2DS
DF3-15P-2DS(01)
Note : The quantity for delivery is determined per bag(100 pcs.). If needed, please order the products per bag.
Number of Contacts
A
B
2
3
4
5
6
7
8
9
10
11
12
13
14
15
06
08
10
12
14
16
18
20
22
24
26
28
30
32
02
04
06
08
10
12
14
16
18
20
22
24
26
28
A259
■Straight Pin Header (SMT)
BPCB mounting pattern
Note :
If a pattern is included in the shaded area and is not treated with resist,
it could touch the connector contact.
[Specific No.] –* *, (* *)
(20) :Tin plated tube packaging
(50) :Gold plated tube packaging
Unit: mm
With Boss
Without Boss
A
B
C
D
543-0207-8-**
2
02
8.5
4.8
8.74
DF3D- 3P-2V(**)
543-0208-0-**
3
04
10.5
6.8
10.74
34
543-0123-0-**
DF3D- 4P-2V(**)
543-0209-3-**
4
06
12.5
8.8
12.74
30
543-0124-2-**
DF3D- 5P-2V(**)
543-0210-2-**
5
08
14.5
10.8
14.74
26
543-0125-5-**
DF3D- 6P-2V(**)
543-0211-5-**
6
10
16.5
12.8
16.74
23
543-0126-8-**
DF3D- 7P-2V(**)
543-0212-8-**
7
12
18.5
14.8
18.74
21
543-0127-0-**
DF3D- 8P-2V(**)
543-0213-0-**
8
14
20.5
16.8
20.74
19
543-0128-3-**
DF3D- 9P-2V(**)
543-0214-3-**
9
16
22.5
18.8
22.74
18
DF3-10P-2V(**)
543-0129-6-**
DF3D-10P-2V(**)
543-0215-6-**
10
18
24.5
20.8
24.74
17
DF3-11P-2V(**)
543-0130-5-**
DF3D-11P-2V(**)
543-0216-9-**
11
20
26.5
22.8
26.74
15
DF3-12P-2V(**)
543-0131-8-**
DF3D-12P-2V(**)
543-0217-1-**
12
22
28.5
24.8
28.74
14
DF3-13P-2V(**)
543-0132-0-**
DF3D-13P-2V(**)
543-0218-4-**
13
24
30.5
26.8
30.74
14
DF3-14P-2V(**)
543-0133-3-**
DF3D-14P-2V(**)
543-0219-7-**
14
26
32.5
28.8
32.74
13
15
28
34.5
30.8
34.74
12
CL No.
Part Number
CL No.
DF3- 2P-2V(**)
543-0121-4-**
DF3D- 2P-2V(**)
DF3- 3P-2V(**)
543-0122-7-**
DF3- 4P-2V(**)
DF3- 5P-2V(**)
DF3- 6P-2V(**)
DF3- 7P-2V(**)
DF3- 8P-2V(**)
DF3- 9P-2V(**)
DF3-15P-2V(**)
DF3D-15P-2V(**)
543-0134-6-**
543-0220-6-**
Note : Please order the tube packaging product, multiplying by tube package quantity ( pcs.).
A260
Tube Packaging
Number of Contacts
Part Number
Quantity
41 pcs.
■Right Angle Pin Header (SMT)
BPCB mounting pattern
BTube Size
[Specific No.] –* *, (* *)
(20) :Tin plated tube packaging
(21) :Tin plated embossed packaging
(Note the number of contacts
for marchandization.)
(50) :Gold plated tube packaging
(51) :Gold plated embossded packaging
■Number of Contacts for Embossed Packaging
Available
Numbers of Contacts
(21)Tin plated
(51)Gold plated
(21)Tin plated
(51)Gold plated
DF3D-*P-2H
DF3D-*P-2H
2
3
4
5
K K K K
K K K ∞
K K K K
∞ K K K
6
7
8
K ∞ K
∞ K ∞
K K K
K K K
9
∞
∞
∞
∞
10 11 12 13 14 15
K K K ∞ ∞ K
∞ K K ∞ ∞ K
K K K K ∞ K
K K K ∞ ∞ ∞
Unit: mm
With Boss
Without Boss
Tube Packaging
Quantity
Number of Contacts
A
B
C
D
543-0221-9-**
2
2
8.5
4.8
8.74
DF3D- 3P-2H(**)
543-0222-1-**
3
4
10.5
6.8
10.74
34
DF3D- 4P-2H(**)
543-0223-4-**
4
6
12.5
8.8
12.74
30
DF3D- 5P-2H(**)
543-0224-7-**
5
8
14.5
10.8
14.74
26
10
16.5
12.8
16.74
23
Part Number
CL No.
Part Number
CL No.
DF3- 2P-2H(**)
543-0107-3-**
DF3D- 2P-2H(**)
DF3- 3P-2H(**)
543-0108-6-**
DF3- 4P-2H(**)
543-0109-9-**
DF3- 5P-2H(**)
543-0110-8-**
41 pcs.
DF3- 6P-2H(**)
543-0111-0-**
DF3D- 6P-2H(**)
543-0225-0-**
6
DF3- 7P-2H(**)
543-0112-3-**
DF3D- 7P-2H(**)
543-0226-2-**
7
12
18.5
14.8
18.74
21
DF3- 8P-2H(**)
543-0113-6-**
DF3D- 8P-2H(**)
543-0227-5-**
8
14
20.5
16.8
20.74
19
DF3- 9P-2H(**)
543-0114-9-**
DF3D- 9P-2H(**)
543-0228-8-**
9
16
22.5
18.8
22.74
18
DF3-10P-2H(**)
543-0115-1-**
DF3D-10P-2H(**)
543-0229-0-**
10
18
24.5
20.8
24.74
17
DF3-11P-2H(**)
543-0116-4-**
DF3D-11P-2H(**)
543-0230-0-**
11
20
26.5
22.8
26.74
15
DF3-12P-2H(**)
543-0117-7-**
DF3D-12P-2H(**)
543-0231-2-**
12
22
28.5
24.8
28.74
14
DF3-13P-2H(**)
543-0118-0-**
DF3D-13P-2H(**)
543-0232-5-**
13
24
30.5
26.8
30.74
14
DF3-14P-2H(**)
543-0119-2-**
DF3D-14P-2H(**)
543-0233-8-**
14
26
32.5
28.8
32.74
13
15
DF3-15P-2H(**)
DF3D-15P-2H(**)
543-0120-1-**
543-0234-0-**
Note1: Please order the tube packaging product, multipliing the tube package quantity. ( pcs.)
Note2: Please order the emboss packaging product by the reel number. (1 reel : 1000 pcs.)
28
34.5
30.8
34.74
12
A261
■In-line Plug
[Specific No.] –* *, (* *)
Blank: 1 pack
Photo: Contact inserted status
Number of Contacts
Part Number
CL No.
A
B
02
06
2
DF3- 2EP-2C(**) 543-0064-2-**
04
08
3
DF3- 3EP-2C(**) 543-0065-5-**
06
10
4
DF3- 4EP-2C(**) 543-0066-8-**
08
12
5
DF3- 5EP-2C(**) 543-0067-0-**
10
14
6
DF3- 6EP-2C(**) 543-0068-3-**
12
16
7
DF3- 7EP-2C(**) 543-0069-6-**
14
18
8
DF3- 8EP-2C(**) 543-0070-5-**
Note : The specific No."None" item is delivered per bag (100 pcs.).
■In-line Plug with Panel Lock
Number of Contacts
Part Number
CL No.
09
DF3- 9EP-2C(**) 543-0071-8-**
10
DF3-10EP-2C(**) 543-0072-0-**
11
DF3-11EP-2C(**) 543-0073-3-**
12
DF3-12EP-2C(**) 543-0074-6-**
13
DF3-13EP-2C(**) 543-0075-9-**
14
DF3-14EP-2C(**) 543-0076-1-**
15
DF3-15EP-2C(**) 543-0077-4-**
Please order products per bag unit.
A
20
22
24
26
28
30
32
Unit: mm
B
16
18
20
22
24
26
28
BPanel Cutouts
Photo: Contact insertion status
Number of Contacts
Part Number
CL No.
A
B
06
11
2
DF3AA- 2EP-2C(**) 543-0151-5-**
08
13
3
DF3AA- 3EP-2C(**) 543-0152-8-**
10
15
4
DF3AA- 4EP-2C(**) 543-0153-0-**
12
17
5
DF3AA- 5EP-2C(**) 543-0154-3-**
14
19
6
DF3AA- 6EP-2C(**) 543-0155-6-**
16
21
7
DF3AA- 7EP-2C(**) 543-0156-9-**
18
23
8
DF3AA- 8EP-2C(**) 543-0157-1-**
20
25
9
DF3AA- 9EP-2C(**) 543-0158-4-**
22
27
10
DF3AA-10EP-2C(**) 543-0159-7-**
24
29
11
DF3AA-11EP-2C(**) 543-0160-6-**
26
31
12
DF3AA-12EP-2C(**) 543-0161-9-**
28
33
13
DF3AA-13EP-2C(**) 543-0162-1-**
30
35
14
DF3AA-14EP-2C(**) 543-0163-4-**
32
37
15
DF3AA-15EP-2C(**) 543-0164-7-**
Note : Specific No."None" item is delivered per bag (100 pcs.).
A262
Unit: mm
C
D
E
02
9.4
6.3
Note1: Applicable panel thickness is
1.6 to 1.0mm. (However, a
04
11.4
8.3
slight backlash is considered for
06
13.4 10.3
the thickness other than 1.6
08
15.4 12.3
and 1.2mm.)
10
17.4 14.3
Note2:
Use the non-radius surface at
12
19.4 16.3
the hooking panel edge.
14
21.4 18.3
Note3: Contact No. indicates 1, 4, 8,
16
23.4 20.3
12, and 15.
18
25.4 22.3
20
27.4 24.3
22
29.4 26.3
24
31.4 28.3
[Specific No.] –* *, (* *)
26
33.4 30.3
Blank : 100 pcs. per bag
28
35.4 32.3
Please order products per bag unit.
■In-line Adapter with Panel Lock
BPanel Cutouts
Adapter to in-line by pushing 2 pcs. of
socket from both sides
No.1-No.1 connection circuit type
Unit: mm
Number of Contacts
A
B
C
DF3- 2EP-2A(**) 543-0267-0-**
2
11
06
DF3- 3EP-2A(**) 543-0268-2-**
3
13
08
DF3- 4EP-2A(**) 543-0269-5-**
4
15
DF3- 5EP-2A(**) 543-0270-4-**
5
17
DF3- 6EP-2A(**) 543-0271-7-**
6
DF3- 7EP-2A(**) 543-0272-0-**
7
DF3- 8EP-2A(**) 543-0273-2-**
Part Number
CL No.
D
E
02
9.4
6.3
04
11.4
8.3
10
06
13.4
10.3
12
08
15.4
12.3
19
14
10
17.4
14.3
21
16
12
19.4
16.3
8
23
18
14
21.4
18.3
DF3- 9EP-2A(**) 543-0274-5-**
9
25
20
16
23.4
20.3
DF3-10EP-2A(**) 543-0275-8-**
10
27
22
18
25.4
22.3
DF3-11EP-2A(**) 543-0276-0-**
11
29
24
20
27.4
24.3
DF3-12EP-2A(**) 543-0277-3-**
12
31
26
22
29.4
26.3
DF3-13EP-2A(**) 543-0278-6-**
13
33
28
24
31.4
28.3
DF3-14EP-2A(**) 543-0279-9-**
14
35
30
26
33.4
30.3
Note1: Applicable panel thickness is 1.6
to 1.0mm.(However,backlash
will occur except for 1.6, 1.2mm
thickness.)
Note2: Please use the non-radius surface
at the hooking panel edge.
[Specific No.] –* *, (* *)
Blank : 100 pcs. per bag
15
28
35.4 32.3
37
32
DF3-15EP-2A(**) 543-0280-8-**
Note : Specific No."None" item is delivered per bag (100 pcs.). Please order products per bag unit.
A263
■Crimping Contact for Socket
Part Number
Type
CL No.
Quantity
DF3-22SCF
543-0235-3
Reel contact 10000 pcs. per embossed tape bag
DF3-22SC
543-0236-6
Bulk contact
DF3-2428SCF
543-0001-2
Reel contact 10000 pcs. per embossed tape bag
DF3-2428SC
543-0002-5
Bulk contact
DF3-2428SCFC
543-0046-0
Reel contact 10000 pcs. per embossed tape bag
DF3-248SCC
543-0047-3
Bulk contact
100 pcs.
per embossed tape bag
100 pcs.
per embossed tape bag
●Applicable Wire (Tin Plating Annealed
Copper Wire)
Jacket Diameter
AWG 22 (17pcs./0.16mm)
Ø1.2 to Ø1.45mm
Tin plated
per embossed tape bag
100 pcs.
Conductor Size (Wire Configuration)
Finish
Gold plated
●Recommended Wire
UL1061, UL1007 (Note 2.)
●Strip Length
1.8 to 2.3mm
AWG 24 (11pcs./0.16mm)
AWG 26 (7pcs./0.16mm)
Ø0.75 to Ø1.45mm
AWG 28 (7pcs./0.127mm)
Note1: If other wires are used instead of the applicable cable, please contact HRS company.
Note2: DF3-22SCF is applicable to UL1061.
■Crimping Contact for In-line Plug
CL No.
Type
DF3-EP2428PCF
543-0062-7
Reel contact
10000 pcs.
per reel
DF3-EP2428PC
543-0063-0
Bulk contact
100 pcs.
per pack
DF3-EP2428PCFA
543-0149-3
Reel contact
10000 pcs.
per reel
DF3-EP2428PCA
543-0150-2
Bulk contact
100 pcs.
per pack
Part Number
Quantity
●Applicable Wire (Tin Plating Annealed
Copper Wire)
Conductor Size (Wire Configuration)
Jacket Diameter
Tin plated
Gold plated
●Recommended Wire
UL1061, UL1007
●Strip Length
1.9 to 2.5mm
AWG 24 (11pcs./0.16mm)
AWG 26 (7pcs./0.16mm)
Finish
Ø0.75 to Ø1.45mm
AWG 28 (7pcs./0.127mm)
Note1: If other wires are used instead of the applicable cable, please contact HRS company.
BApplicable Crimping Tool
Type
Applicator
Press Unit
Hand Crimping Tool
Extraction Tool
Part Number
CL No.
Applicable Contact
AP105-DF3-2428S
901-4503-3
DF3-2428SCF/SCFC
AP105-DF3-22S
901-4549-4
DF3-22SCF
AP105-DF3-EP2428P
901-4508-7
DF3-EP2428PCF/PCFA
CM-105
901-0005-4
–––––––––––––––––––
DF3-TA2428HC
550-0164-5
DF3-2428SC/SCC
DF3EP-TA2428HC
550-0184-2
DF3-EP2428PC/PCA
DF3-TA22HC
550-0257-4
DF3-22SC
DF-C-PO (A)
550-0170-8
DF3-****SCF
DF3-EP****PCF
Note : If any trouble has occurred due to tools other than designated tool, Hirose bears no respoisibility for any trouble.
A264
Similar pages