Artesyn AEE00BB24-M 4200 vac reinforced insulation Datasheet

POWER
AEE10W-M Series
10 Watts
Data Sheet
Total Power: 10 Watts
Input Voltage: 12 V, 24 V or 48 V
# of Outputs: Single, Dual
SPECIAL FEATURES
ƒƒ 4200 VAC reinforced Insulation
ƒƒ Insulation rated for 300 VAC
Working Voltage
ƒƒ Medical Safety to UL/CSA/EN/IEC
60601-1 3rd Edition
Electrical Specifications
ƒƒ 2 MOOP rated
Input
ƒƒ Wide 2:1 Input Voltage Range
Input ra­nge
9 - 18 Vdc; 18 - 36 Vdc; 36 - 75 Vdc
ƒƒ Fully regulated Output Voltage
Efficiency
82%
ƒƒ Low Leakage Current
ƒƒ Operating Temp. Range –40°C to
+85 °C (With derating)
Output
Voltage tolerance
±1.0%
ƒƒ Input Filter meets EN 55022, class
A and FCC, level A
Line regulation
±0.5%
Load regulation
1.2%
ƒƒ Overload Protection
Noise/ripple
100 mV
ƒƒ 2”x 1” Plastic Package
OCP and S/C protection
Hiccup
ƒƒ 3 Years Product Warranty
Over voltage protection
Latched
OTP protection
Latched
Switching frequency
150 KHz
Temperature coefficient
±0.02 /°C
SAFETY
ƒƒ cUL/UL60950-1, CSA C22.2 No.
60950-1-03
ƒƒ UL60601-1, CSA C22.2 No.601-1
Isolation
I/O isolation
4200 VACrms
Insulation resistance
10 Gohm
ƒƒ IEC60950-1 CB report, cUL/UL
60950-1 certificate
Insulation capacitance
80 pF
ƒƒ UL60601-1 UL certificate
Environmental Specifications
ƒƒ IEC/EN 60950-1, IEC/EN 60601-1
3rd Edition, 2 MOOP
Operating ambient temperature range
-40 °C to +85 °C
Storage temperature
-50 °C to +125 °C
Humidity
5% to 95% (non-condensing)
Calculated MTBF
1 MHrs
AEE10W-M Series Data Sheet
Mechanical Drawings
Pin Connectors
Pin No.
Single Output
Dual Output
1
+Vin
+Vin
2
-Vin
-Vin
3
+Vout
+Vout
4
No Pin
Common
5
-Vout
-Vout
T: 11.0 mm (0.43 inch) for 24 V Output Models
T: 10.2 mm (0.40 inch) for Other Output Models
• All dimensions in mm (inches)
• Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
• Pin dimension tolerance: ±0.05 (±0.002)
Physical Characteristics
Ordering Information
Case Size (24 V
Output):
50.8 x 25.4 x 11 mm
(2.0 x 1.0 x 0.43 inches)
Artesyn Part number
Input Voltage
Output 1 Voltage
AEE01A12-M
9 - 18 V
5 V @ 1.6 A
Case Size
(Other Output):
50.8 x 25.4 x 10.2 mm
(2.0 x 1.0 x 0.40 inches)
AEE00B12-M
9 - 18 V
12 V @ 0.835 A
AEE00BB12-M
9 - 18 V
12 V @ 0.417 A
-12 V @ 0.417 A
10 W
Case Material:
Aluminium Alloy, Black
Anodized Coating
AEE00CC12-M
9 - 18 V
15 V @ 0.333 A
-15 V @ 0.333 A
10 W
Base Material:
FR4 PCB (flammability to
UL 94V-0 rated)
AEE02A24-M
18 - 36 V
5V@2A
10 W
AEE00B24-M
18 - 36 V
12 V @ 0.835 A
10 W
AEE00BB24-M
18 - 36 V
12 V @ 0.417 A
-12 V @ 0.417 A
10 W
AEE00CC24-M
18 - 36 V
15 V @ 0.333 A
-15 V @ 0.333 A
10 W
AEE02A48-M
36 - 75 V
5V@2A
10 W
AEE00B48-M
36 - 75 V
12 V @ 0.835 A
10 W
AEE00BB48-M
36 - 75 V
12 V @ 0.417 A
-12 V @ 0.417 A
10 W
AEE00CC48-M
36 - 75V
15 V @ 0.333 A
-15 V @ 0.333 A
10 W
Pin Material:
Weight:
Copper Alloy with Gold
Plate Over Nickel
Subplate
30 g
Output 2 Voltage
Maximum Power
8W
10 W
WORLDWIDE OFFICES
Americas
Europe (UK)
Asia (HK)
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn
Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use
of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn
Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc.
All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective
owners. © 2015 Artesyn Embedded Technologies, Inc.
www.artesyn.com
For more information: www.artesyn.com/power
For support: [email protected]
AEE10W-M DS Rev. 01.29.15
Similar pages