AG303-86 The Communications Edge TM InGaP HBT Gain Block Product Features • DC – 6000 MHz • +14 dBm P1dB at 900 MHz • +26 dBm OIP3 at 900 MHz • 20.5 dB Gain at 900 MHz • Single Voltage Supply • SOT-86 SMT Package Product Description Functional Diagram The AG303-86 is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package. At 900 MHz, the AG303-86 typically provides 20.5 dB of gain, +26 dBm Output IP3, and +14 dBm P1dB. The device combines dependable performance with consistent quality to maintain MTTF values exceeding 100 years at mounting temperatures of +85° C and is housed in a SOT-86 (micro-X) industry-standard SMT package. GND 4 RF In 3 RF Out 1 2 • Internally matched to 50 Ω Applications • • • • • • Product Information Mobile Infrastructure CATV / DBS W-LAN / ISM RFID Defense / Homeland Security Fixed Wireless The AG303-86 consists of Darlington pair amplifiers using the high reliability InGaP/GaAs HBT technology process technology and only requires DC-blocking capacitors, a bias resistor, and an inductive RF choke for operation. GND Function Input Output/Bias Ground The broadband MMIC amplifier can be directly applied to various current and next generation wireless technologies such as GPRS, GSM, CDMA, and W-CDMA. In addition, the AG303-86 will work for other various applications within the DC to 6 GHz frequency range such as CATV and fixed wireless. Specifications Pin No. 1 3 2, 4 Typical Performance Parameter Units Min Typ Max Parameter Frequency Range Gain (900 MHz) Gain (1900 MHz) Input Return Loss Output Return Loss Output P1dB Output IP3 (2) Output IP2 Noise Figure Device Voltage Device Current Thermal Resistance Junction Temperature (3) MHz dB dB dB dB dBm dBm dBm dB V mA °C / W °C DC 900 20.4 18.1 -22 -20 +14.0 +26.1 +34 3.0 4.23 35 6000 Frequency S21 S11 S22 Output P1dB Output IP3 Noise Figure 17.1 19.1 Units MHz dB dB dB dBm dBm dB Typical 500 21.1 -21 -22 +14.0 +26.4 2.9 900 20.4 -22 -20 +14.0 +26.1 3.0 1900 18.1 -26 -16 +12.7 +24.8 3.2 2140 17.5 -25 -16 +12.4 +24.4 3.2 Test conditions: T = 25º C, Supply Voltage = +5 V, Rbias = 22.1 Ω, 50 Ω System. 335 177 Test conditions unless otherwise noted. 1. T = 25º C, Supply Voltage = +5 V, Rbias = 22.1 Ω, Frequency = 900 MHz, 50 Ω System. 2. 3OIP measured with two tones at an output power of -2 dBm/tone separated by 10 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule. 3. The junction temperature ensures a minimum MTTF rating of 1 million hours of usage. Absolute Maximum Rating Parameter Operating Case Temperature Storage Temperature DC Voltage RF Input Power (continuous) Junction Temperature Rating -40 to +85 °C -55 to +125 °C +5 V +10 dBm +250° C Ordering Information Part No. Description AG303-86 AG303-86PCB InGaP HBT Gain Block 700 – 2400 MHz Fully Assembled Eval. Board Operation of this device above any of these parameters may cause permanent damage. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com April 2004 AG303-86 The Communications Edge TM InGaP HBT Gain Block Product Information Typical Device RF Performance Supply Bias = +5 V, Rbias = 22.1 Ω, Icc = 35 mA Frequency S21 S11 S22 Output P1dB Output IP3 Noise Figure MHz dB dB dB dBm dBm dB 100 21.4 -25 -19 +14.2 +26.5 2.9 500 21.1 -21 -22 +14.0 +26.4 2.9 900 20.4 -22 -20 +14.0 +26.1 3.0 1900 18.1 -26 -16 +12.7 +24.8 3.2 2140 17.5 -25 -16 +12.4 +24.4 3.2 2400 16.9 -25 -15 +12.1 +23.9 3.2 3500 14.9 -25 -15 +9.3 5800 11.4 -25 -14 1. Test conditions: T = 25º C, Supply Voltage = +5 V, Device Voltage = 4.23 V, Rbias = 22.1 Ω, Icc = 35 mA typical, 50 Ω System. 2. 3OIP measured with two tones at an output power of -2 dBm/tone separated by 10 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule. 3. Data is shown as device performance only. Actual implementation for the desired frequency band will be determined by external components shown in the application circuit. Gain vs. Frequency Return Loss I-V Curve 0 Device Current (mA) 60 S11, S22 (dB) 20 18 16 -10 -20 -30 14 -40 C +25 C S11 +85 C 1 2 Frequency (GHz) 3 0 4 1 3 4 5 35 20 15 2 2.5 4 30 0 +25c +85c -40 C 200 400 600 800 0 1000 15 20 Gain (dB) 22 10 20 18 16 16 Gain 18 12 16 8 14 4 1 1.5 2 2.5 Frequency (GHz) 3 3.5 4 0 -20 -16 -12 -8 -4 Input Power (dBm) 1.5 2 2.5 3 16 12 Gain 14 8 12 4 10 0 Output Power 12 0.5 1 frequency = 2000 MHz Output Power 0 +85 C Output Power / Gain vs. Input Power frequency = 900 MHz 5 +85 C +25 C Frequency (GHz) Output Power / Gain vs. Input Power P1dB vs. Frequency 0 0.5 Frequency (MHz) 20 +25 C 2 0 Frequency (GHz) -40 C 3 1 -40c 3 4.5 Noise Figure vs. Frequency Gain (dB) 1.5 4.0 Device Voltage (V) 20 1 3.5 5 +85 C 10 0.5 10 0 3.0 25 0 20 6 NF (dB) 25 +25 C 30 Output IP2 vs. Frequency 40 OIP2 (dBm) OIP3 (dBm) Output IP3 vs. Frequency P1dB (dBm) 2 Optimal operating point 40 Frequency (GHz) 30 -40 C 50 -40 12 0 S22 Output Power (dBm) Gain (dB) 22 Output Power (dBm) 24 0 4 8 -4 -20 -16 -12 -8 -4 Input Power (dBm) 0 4 Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com April 2004 AG303-86 The Communications Edge TM InGaP HBT Gain Block Product Information Typical Device RF Performance (cont’d) Supply Bias = +6 V, Rbias = 51 Ω, Icc = 35 mA Gain vs. Frequency Output IP3 vs. Frequency 24 Output IP2 vs. Frequency 30 40 25 35 20 18 16 OIP2 (dBm) OIP3 (dBm) Gain (dB) 22 20 15 25 14 -40 C +25 C -40 C +85 C 0 1 2 Frequency (GHz) +25 C +85 C 3 0 4 +25c +85c 20 0.5 1 1.5 2 2.5 3 0 200 Frequency (GHz) 400 600 800 1000 Frequency (MHz) Noise Figure vs. Frequency P1dB vs. Frequency 5 20 4 15 NF (dB) P1dB (dBm) -40c 10 12 30 10 5 -40 C +25 C 3 2 1 +85 C -40 C +25 C +85 C 0 0 0 0.5 1 1.5 2 2.5 3 3.5 0 4 0.5 1 1.5 2 2.5 3 Frequency (GHz) Frequency (GHz) Typical Device RF Performance Supply Bias = +8 V, Rbias = 108 Ω, Icc = 35 mA Output IP3 vs. Frequency Gain vs. Frequency 24 Output IP2 vs. Frequency 30 40 25 35 20 18 16 OIP2 (dBm) OIP3 (dBm) Gain (dB) 22 20 25 15 14 -40 C -40 C +25 C +85 C 0 1 2 Frequency (GHz) +25 C 3 0 4 +25c +85c 20 0.5 1 1.5 2 2.5 0 3 200 400 600 800 1000 Frequency (MHz) Frequency (GHz) Noise Figure vs. Frequency P1dB vs. Frequency 5 20 4 15 NF (dB) P1dB (dBm) -40c +85 C 10 12 30 10 5 -40 C +25 C 3 2 1 +85 C -40 C +25 C +85 C 0 0 0 0.5 1 1.5 2 2.5 Frequency (GHz) 3 3.5 4 0 0.5 1 1.5 2 2.5 3 Frequency (GHz) Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com April 2004 AG303-86 The Communications Edge TM InGaP HBT Gain Block Product Information Application Circuit Vcc Icc = 35 mA R1 Bias Resistor C4 Bypass Capacitor C3 0.018 µF L1 RF Choke RF IN RF OUT AG303-86 C1 Blocking Capacitor C2 Blocking Capacitor Recommended Component Values Reference Designator 50 500 L1 820 nH 220 nH C1, C2, C4 .018 µF 1000 pF Frequency (MHz) 900 1900 2200 68 nH 27 nH 22 nH 100 pF 68 pF 68 pF 2500 18 nH 56 pF 1. The proper values for the components are dependent upon the intended frequency of operation. 2. The following values are contained on the evaluation board to achieve optimal broadband performance: Ref. Desig. L1 C1, C2 C3 C4 R1 Value / Type 39 nH wirewound inductor 56 pF chip capacitor 0.018 µF chip capacitor Do Not Place 22.1 Ω 1% tolerance Size 0603 0603 0603 0603 3500 15 nH 39 pF Recommended Bias Resistor Values S upply R1 value S ize Voltage 5V 22.1 ohms 0603 6V 51 ohms 0805 7V 80 ohms 1206 8V 108 ohms 1210 9V 137 ohms 1210 10 V 166 ohms 1210 12 V 223 ohms 2010 The proper value for R1 is dependent upon the supply voltage and allows for bias stability over temperature. WJ recommends a minimum supply bias of +5 V. A 1% tolerance resistor is recommended. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com April 2004 AG303-86 The Communications Edge TM InGaP HBT Gain Block Outline Drawing Product Information Product Marking The component will be marked with an “E” designator followed by a two-digit numeric lot code on the top surface of the package. Tape and reel specifications for this part are located on the website in the “Application Notes” section. MSL / ESD Rating ESD Rating: Value: Test: Standard: Class 1C Passes at 1000 V min. Human Body Model (HBM) JEDEC Standard JESD22-A114 ESD Rating: Value: Test: Standard: Level 4 Passes at 1000 V min. Charged Device Model (CDM) JEDEC Standard JESD22-C101 MSL Rating: Level 1 Standard: JEDEC Standard J-STD-020A Land Pattern Mounting Config. Notes Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com April 2004 AG303-86 The Communications Edge TM InGaP HBT Gain Block Product Information Typical Device Data S-Parameters (Vdevice = +4.23 V, ICC = 35 mA, T = 25° C, calibrated to device leads) Freq (MHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) 50 -25.41 -178.61 21.90 177.08 -24.39 200 -25.29 152.70 21.78 168.98 -24.92 400 -22.67 142.05 21.61 158.15 -24.91 600 -22.01 133.74 21.36 147.83 -24.62 800 -22.06 117.59 21.06 138.04 -24.69 1000 -22.37 104.08 20.62 128.55 -24.69 1200 -22.80 93.62 20.16 119.27 -24.39 1400 -23.63 79.81 19.74 110.95 -24.29 1600 -24.69 64.41 19.26 102.71 -24.03 1800 -26.24 45.86 18.74 95.08 -23.96 2000 -25.80 20.48 18.25 87.61 -23.36 2200 -20.53 8.33 17.76 81.11 -23.39 2400 -21.16 -4.54 17.31 74.28 -23.38 2600 -21.78 -20.14 17.04 69.94 -23.19 2800 -20.76 -32.31 16.63 63.58 -22.58 3000 -20.28 -38.57 16.22 57.01 -22.30 3200 -20.74 -41.19 15.81 51.26 -21.92 3400 -21.02 -44.69 15.46 44.98 -21.74 3600 -22.14 -43.95 15.08 39.16 -21.47 3800 -23.67 -43.34 14.77 33.34 -21.11 4000 -25.23 -33.68 14.43 27.45 -21.01 4200 -27.39 -14.72 14.05 21.59 -20.29 4400 -29.54 12.12 13.75 16.08 -20.48 4600 -28.75 34.29 13.41 10.16 -20.13 4800 -27.76 56.08 13.11 4.72 -19.80 5000 -27.40 61.17 12.84 -0.90 -19.45 5200 -31.18 79.84 12.55 -5.98 -19.40 5400 -35.34 119.42 12.24 -10.91 -18.92 5600 -34.18 174.08 12.06 -16.20 -19.14 5800 -27.69 -150.63 11.83 -21.19 -18.61 6000 -24.71 -137.35 11.61 -26.11 -18.61 S12 (ang) 2.68 -0.09 0.62 -0.50 1.13 -0.47 -1.44 -1.57 -0.32 -0.52 -1.98 -1.70 -1.57 -8.56 -6.92 -5.72 -8.55 -10.16 -13.06 -15.38 -19.42 -21.17 -23.10 -26.06 -28.11 -32.13 -32.66 -38.05 -39.14 -42.26 -44.88 S22 (dB) -19.43 -19.61 -22.46 -21.75 -20.87 -19.91 -18.74 -17.73 -17.05 -16.53 -16.04 -14.40 -14.45 -14.74 -15.03 -15.40 -15.97 -16.15 -16.48 -16.22 -15.95 -14.84 -14.06 -13.22 -12.79 -12.53 -12.66 -13.25 -13.87 -14.85 -15.38 S22 (ang) -6.66 -17.93 -48.44 -65.73 -87.05 -103.53 -116.95 -125.82 -136.02 -143.29 -146.19 -134.47 -141.18 -146.26 -151.82 -161.21 -170.30 179.31 164.61 150.20 135.04 123.66 114.44 107.82 103.31 101.02 97.81 98.58 98.73 100.95 100.73 Device S-parameters are available for download off of the website at: http://www.wj.com Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: [email protected] • Web site: www.wj.com April 2004