ADVANCE INFORMATION January 20, 2012 Low Power 10GbE Quad Channel Retimer General Description Features The DS100RT410/DS100DF410 is a four-channel 10GbE retimer with integrated signal conditioning. Both the DS100RT410 and the DS100DF410 include an input Continuous-Time Linear Equalizer (CTLE) on each channel. The DS100DF410 also includes a five-tap Decision Feedback Equalizer (DFE) on each channel. The DS100DF410 can enhance the reach and robustness of long, lossy, crosstalk-impaired high-speed serial links to achieve BER < 1×10-15. For less demanding applications/interconnects, the non-DFE variant DS100RT410 can be used to achieve the same BER performance. The two devices are pin-compatible. Each channel of the DS100RT410/DS100DF410 independently locks to 10GbE serial data at a data rate of 10.3125 Gbps or to 1GbE data at a data rate of 1.25 Gbps. A reference clock is not required, which simplifies system design and lowers overall cost. Both devices support either data rate. A protocol-select mode is available to speed up lock time. Programmable transmit de-emphasis (up to -12 dB), transmit VOD (up to 1300 mVp-p) and adaptive receive equalization (up to 34 dB boost at 5 GHz) enable data transmission over lossy copper cables of typical lengths greater than 10 m or backplanes with multiple connectors and typical trace lengths greater than 40 inches. The CDR function is ideal for use in parallel optical modules to reset the jitter budget and retime high-speed serial data. The programmable settings can be applied easily using the SMBus interface or they can be loaded via an external EEPROM. An on-chip eye monitor and a PRBS generator allow real-time measurement of high-speed serial data for system bring-up or field tuning. The device is offered in a 48-pin LLP, 7 mm x 7 mm flowthrough package. Notice: This document is not a full datasheet. For more information regarding this product or to order samples please contact your local Texas Instruments sales office or visit http://www.ti.com. ■ All devices in the retimer family are pin compatible with © 2012 Texas Instruments Incorporated 301608 SNLS399 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ each other and with the quad buffer-repeater. The pincompatible device family includes the following: — DS100RT410 (EQ+CDR+DE): 10.3125 Gbps — DS100DF410 (EQ+DFE+CDR+DE): 10.3125 Gbps — DS110RT410 (EQ+CDR+DE): 8.5 - 11.3 Gbps — DS110DF410 (EQ+DFE+CDR+DE): 8.5 - 11.3 Gbps — DS125RT410 (EQ+CDR+DE): 9.8 - 12.5 Gbps — DS125DF410 (EQ+DFE+CDR+DE): 9.8 - 12.5 Gbps — DS100BR410 (EQ+DE): Up to 10.3125 Gbps Typical Power Dissipation (EQ+CDR+DE): 150 mW / channel Typical Power Dissipation (EQ+DFE+CDR+DE): 180 mW / channel Locks to 10.3125 Gbps and 1.25 Gbps data rates Fast lock operation based on protocol-select mode Adaptive equalization up to 34 dB boost at 5 GHz Adjustable transmit VOD : 600 to 1300 mVp-p Adjustable transmit de-emphasis to -12 dB Programmable output polarity inversion Input signal detection, CDR lock detection/indicator On-chip Eye Monitor (EOM), PRBS generator Single 2.5 V ±5% power supply SMBus/EEPROM configuration modes Applications ■ Host-side front-port and backplane interface, SFF-8431, SFF-8436 (10GbE and 1GbE) ■ Ethernet: 10GbE, 1GbE For other data rates and data transmission protocols, other pin-compatible devices in the retimer family can be used. www.ti.com DS100RT410, DS100DF410 PRODUCT BRIEF DS100RT410, DS100DF410 PRODUCT BRIEF DS100RT410, DS100DF410 Typical Application Diagram 30160880 www.ti.com 2 DS100RT410, DS100DF410 www.ti.com 3 DS100RT410, DS100DF410 PRODUCT BRIEF Notes www.ti.com IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated