FESA08G Ultra fast Plastic Power Rectifiers VOLTAGE: 400V CURRENT: 8.0A FEATURE TO-220AC Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ultra fast recovery time for high efficiency Excellent high temperature switching Glass passivated junction High voltage and high reliability High speed switching Low forward voltage MECHANICAL DATA Case: JEDEC TO-220 molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified at Tc =100°C Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum Reverse Recovery Time (Note 1) Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical thermal resistance junction to case Typical junction capacitance (Note 2) Storage and Operating Temperature range SYMBOL FESA08G units Vrrm Vrms Vdc If(av) 400 280 400 8.0 V V V A Ifsm 150 A Vf 1.3 V Trr 50 5.0 200.0 2.2 80 -55 to +150 nS Ir Rth(jc) Cj Tstg, Tj µA °C/W pF °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES FESA08G Rev.A1 www.gulfsemi.com