Applied Motion Products, Inc. 404 Westridge Dr. Watsonville, CA 95076, USA 1-800-525-1609 Tel (831) 761-6555 Fax (831) 7616544 BL060-H03-GP014 Product Datasheet www.Applied-Motion.com 1pc. - 336.00 50pc. - 336.00 42mm Brushless DC Gearmotor, 60W, 14:1 ratio Product Features Brushless design for long life Low maintenance 42 mm frame size Planetary gearbox with 14:1 ratio (13.73:1) Peak torque to 23.63 in-lb Hall signals for velocity feedback Compatible with BD5 brushless drive Submitted by Eric Rice on Thu, 2013-02-07 10:34 Description The BL060-H03-GP014 is a three-phase brushless DC gearmotor for use in velocity control applications. The motor comes with a 14:1 (13.73:1) inline planetary gearbox. Paired with a BD5-G1-AH brushless DC drive this motor provides excellent performance over a wide speed range. Specifications Part Number: BL060-H03-GP014 Rated Torque: 11.8 in-lb Peak Torque: 23.7 in-lb Rated Power: 60 watts Rated Voltage: 24 volts Rated Speed: 328 rpm Peak Speed: 328 rpm Rated Current: 3.6 A rms Peak Current: 7.2 A rms Torque Constant: 0.33 in-lb/A Voltage Constant: 2.7 V/krpm Armature Resistance: 0.45 ohms Armature Inductance: 0.44 mH Motor Length: 5.87 inch Rotor Inertia: 0.001 oz-in-sec2 Integral Gearhead: Yes Gearhead Ratio: 13.73:1 Gearhead Continuous Torque: 1.33 oz-in Gearhead Peak Torque: 2.68 oz-in Gearhead Efficiency: 75% Weight: 2.3 lbs Integral Holding Brake: No Storage Temperature: -20 to 60 °C Operating Temperature: 0 to 50 °C Insulation Class: E Maximum Radial Load: 52 lbs Maximum Thrust Load: 18 lbs Torque Curves Downloads Datasheet: http://s3.amazonaws.com/applied-motion-pdf/BL060-H03-GP014.pdf Speed-Torque Curves: speed torque curves 42mm BL060-H03-GP014 updated 1-21-14.pdf 2D Drawing: BL060-H03-GPXXX_RevA.pdf BL060-H03-G_RevC.pdf BL060-H03-G_w_Gearhead_DoubleStage_3D-PDF.pdf 3D Drawing: BL060-H03-G_w_Gearhead_DoubleStage.igs Pricing BL060-H03-GP014 Part No. BL060-H03-GP014 1pc. $336.00 25pc. $336.00 50pc. $336.00 100pc. Request a Quote for 100+ piece pricing. Products in the Series Brushless DC Motors and Drives Part Number Frame Size Continuous Torque Peak Torque Motor Length Rated Power Rotor Inertia 1pc./50pc. 5000-255-001 NA NA NA NA NA NA $186.00 / $139.50 5000-255-002 NA NA NA NA NA NA $186.00 / $139.50 5000-255-003 NA NA NA NA NA NA $186.00 / $139.50 5000-255-004 NA NA NA NA NA NA $186.00 / $139.50 5000-255-005 NA NA NA NA NA NA $186.00 / $139.50 5000-260-001 NA NA NA NA NA NA $223.00 / $167.25 5000-260-002 NA NA NA NA NA NA $223.00 / $167.25 5000-260-003 NA NA NA NA NA NA $223.00 / $167.25 5000-260-004 NA NA NA NA NA NA $223.00 / $167.25 BL030-H03-G 42 mm 0.58 1.15 1.81 30 5.49E-04 $120.00 / $90.00 BL030-H03-GP005 42 mm 2.38 4.77 4.41 30 0.00055 $269.00 / $269.00 BL030-H03-GP014 42 mm 5.92 11.8 4.93 30 0.00055 $296.00 / $296.00 BL030-H03-GP019 42 mm 8.28 16.6 4.93 30 0.00055 $296.00 / $296.00 BL030-H03-GP029 42 mm 12.5 25.0 4.93 30 0.00055 $296.00 / $296.00 BL030-H03-GP051 42 mm 20.5 41.0 5.45 30 0.00055 $324.00 / $324.00 BL030-H03-GP100 42 mm 40.1 80.1 5.45 30 0.00055 $324.00 / $324.00 BL060-H03-G 42 mm 1.15 2.30 2.76 60 1.02E-03 $160.00 / $120.00 BL060-H03-GP005 42 mm 4.77 9.56 5.36 60 0.001 $309.00 / $309.00 BL060-H03-GP014 42 mm 11.8 23.7 5.87 60 0.001 $336.00 / $336.00 BL060-H03-GP019 42 mm 16.6 33.1 5.87 60 0.001 $336.00 / $336.00 BL060-H03-GP051 42 mm 41.0 82.0 6.39 60 0.001 $364.00 / $364.00 BL060-H03-H 57 mm 1.28 2.56 2.15 60 2.09E-03 $160.00 / $120.00 BL090-H03-G 42 mm 1.90 3.98 3.94 90 1.61E-03 $200.00 / $150.00 BL090-H03-GP005 42 mm 8.25 16.4 6.54 90 0.0016 $344.00 / $344.00 BL090-H03-GP014 42 mm 20.5 41.1 7.05 90 0.0016 $374.00 / $374.00 BL100-H03-I 80 mm 2.12 4.24 1.97 100 5.38E-03 $200.00 / $150.00 BL120-H03-H 57 mm 2.56 5.13 3.25 120 3.95E-03 $200.00 / $150.00 BL180-H04-H 57 mm 3.80 7.61 4.74 180 6.46E-03 $240.00 / $180.00 BL200-H04-I 80 mm 4.24 8.49 2.67 200 0.74 $250.00 / $187.50 BL300-H04-I 80 mm 6.37 12.75 3.31 300 1.53E-02 $300.00 / $225.00