Wall DCMOPW03-24D15A-T 3 watt medical dc/dc power converter Datasheet

DCMOPW03 SERIES
3 Watt Medical
DC/DC Power Converters
Rev B
FEATURES
• 2µA Patient Leakage Current
• Clearance and Creepage Distance: 6.6mm/2MOOP
• Single & Dual Outputs
• 3000VAC Input to Output 2MOOP Isolation
• Under Voltage Protection
• Short Circuit, Over Voltage, and Over Load Protection
• High Efficiency up to 87%
• CE Mark Meets 2006/95/EC, 2011/95/EC, and
• 4:1 Wide Input Voltage Ranges
Size:
1.25 x 0.80 x 0.40 inches
(31.8 x 20.3 x 10.2 mm)
Applications:
• Medical Equipment
• Telecom/Datacom
• Industry Control Systems
• Measurement Equipment
• Semiconductor Equipment
• PV Power Systems
• IGBT Gate Drivers
2004/108/EC
• Built-in EMI Class A Filter
• Compliant to RoHS EU Directive 2011/65/EU
• Low Stand-by Power Consumption
• ANSI/AAMI ES60601-1, EN60601-1, IEC60601-1,
• 3 Watts Output Power
UL60950-1, EN60950-1, & IEC60950-1 Safety
• Reinforced Insulation for 300VAC Working
Approvals
• Optional Remote ON/OFF Control and Trim Pin
Voltage
DESCRIPTION
The DCMOPW03 series of medical DC/DC power converters provides 3 Watts of output power in a
1.25” x 0.80” x 0.40” DIP package. This series consists of single and dual output models with 4:1 wide
input voltage ranges of 9-36VDC and 18-75VDC. Some features include high efficiency up to 87%,
3000VDC I/O (2 MOOP) isolation, and low stand-by power consumption. These converters are also
protected against under voltage, short circuit, over voltage, and over load conditions. All models are
RoHS compliant and have ANSI/AAMI ES60601-1, EN60601-1, IEC60601-1, UL60950-1, EN60950-1,
and IEC60950-1 safety approvals. Remote ON/OFF and Trim functions are also available for this series.
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Model Number (1)
DCMOPW03-24S33x
DCMOPW03-24S05x
DCMOPW03-24S12x
DCMOPW03-24S15x
DCMOPW03-24S24x
DCMOPW03-48S33x
DCMOPW03-48S05x
DCMOPW03-48S12x
DCMOPW03-48S15x
DCMOPW03-48S24x
Input Voltage
24VDC
(9 - 36 VDC)
48 VDC
(18 - 75 VDC)
Output
Voltage
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
Output
Current
1000mA
600mA
250mA
200mA
125mA
1000mA
600mA
250mA
200mA
125mA
Output
No Load
Ripple & Noise Input Current
30mVp-p
6mA
30mVp-p
6mA
40mVp-p
6mA
40mVp-p
6mA
50mVp-p
6mA
30mVp-p
4mA
30mVp-p
4mA
40mVp-p
4mA
40mVp-p
4mA
50mVp-p
4mA
Output
Power
3.3W
3W
3W
3W
3W
3.3W
3W
3W
3W
3W
Efficiency
82%
84.5%
87%
87%
87%
81%
84%
87%
86.5%
86.5%
Maximum
Capacitive Load
1050µF
750µF
130µF
100µF
39µF
1050µF
750µF
130µF
100µF
39µF
DUAL OUTPUT MODELS
Model Number (1)
DCMOPW03-24D05x
DCMOPW03-24D12x
DCMOPW03-24D15x
DCMOPW03-48D05x
DCMOPW03-48D12x
DCMOPW03-48D15x
01/28/2016
Input Voltage
24 VDC
(9 - 36 VDC)
48 VDC
(18 - 75 VDC)
Output
Voltage
Output
Current
Output
No Load
Ripple & Noise Input Current
±5 VDC
±12 VDC
±15 VDC
±5 VDC
±12 VDC
±300mA
±125mA
±100mA
±300mA
±125mA
30mVp-p
40mVp-p
40mVp-p
30mVp-p
40mVp-p
±15 VDC
±100mA
40mVp-p
Output
Power
Efficiency
Maximum
Capacitive Load
6mA
6mA
6mA
4mA
4mA
3W
3W
3W
3W
3W
83%
87%
86%
83%
86%
±430µF
±75µF
±56µF
±430µF
±75µF
4mA
3W
86%
±56µF
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 5
Rev B
DCMOPW03 SERIES
3 Watt Medical
DC/DC Power Converters
SPECIFICATIONS: DCMOPW03 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
9
18
24
48
36
75
9
18
Unit
INPUT SPECIFICATIONS
Input Voltage Range
Start-Up Voltage
Shutdown Voltage
Input Surge Voltage (3sec, max.)
Input Current
Input Filter
Remote ON/OFF Control
(Only for “B” type pin connection models)
Input Current of CTRL Pin
Remote OFF Input Current
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
24VDC nominal input models
48VDC nominal input models
No Load
Referenced to –INPUT pin
8
16
DC/DC ON
DC/DC OFF
Nominal Vin
Nominal Vin
-0.5
VDC
VDC
VDC
50
VDC
100
See Table
Pi type
Open or 0 ~ 1.2VDC
2.2 ~ 12 VDC
1
mA
2.5
mA
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
Low line to high line at full load
Load Regulation
No load to full load
Cross Regulation
Asymmetrical load 25%/100% FL
Voltage Adjustability
Single Output Models
(Only for “B” type pin connection models)
Output Power
Output Current
Maximum Capacitive Load
Ripple & Noise (20MHz BW)
Transient Response Recovery Time
Start-Up Time
Dual Output Models
Single Output Models
Dual Output Models
Single Output Models
Dual Output Models
Dual Output Models
3.3V, 5V, 12V Output Models
15V, 24V Output Models
±5V, ±12V, ±15V Output Models
-1.0
-0.2
-0.5
-0.2
-1.0
-5.0
-10
-10
-10
Minimum input and constant resistive load
Measured with a 10µF/25V X7R MLCC 3.3V, 5V Output Models
Measured with a 10µF/25V X7R MLCC 12V, 15V Output Models
Measured with a 4.7µF/50V X7R MLCC 24V Output Models
25% load step change
Power Up
Constant resistive load
Remote On/Off
Temperature Coefficient
-0.02
See Table
+1.0
+0.2
+0.5
+0.2
+1.0
+5.0
+10
+20
+10
See Table
See Table
See Table
30
40
50
250
30
30
+0.02
%
%
%
%
%
%
mVp-p
µs
ms
%/°C
PROTECTION
Short Circuit Protection
Over Load Protection
Single Output
Over Voltage Protection
3.3V Output Models
5V Output Models
12V Output Models
15V Outputs Models
24V Output Models
±5V Output Models
±12V Output Models
±15V Output Models
Continuous, automatic recovery
150
%
3.7
5.4
5.6
7.0
13.5
16
18.3
22.0
VDC
29.1
34.5
5.6
7.0
13.5
18.2
17.0
22.0
Input to Output
135
3000
% of rated Iout; hiccup mode
Continuous
clamp
Dual Output
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Isolation Voltage
Isolation Capacitance
Leakage Current
Clearance/Creepage
01/28/2016
Nominal input voltage and full load
1 minute
See Table
150
165
12
240VAC, 60Hz
6.6
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
17
2
kHz
VAC
pF
µA
mm
Page 2 of 5
DCMOPW03 SERIES
3 Watt Medical
DC/DC Power Converters
Rev B
SPECIFICATIONS: DCMOPW03 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
Storage Temperature Range
Thermal Impedance
Relative Humidity
Thermal Shock
Vibration
MTBF
Without derating
With derating
-40
+94
-55
Natural convection (20LFM)
+94
+105
+125
°C
°C
°C/W
% RH
18
5
MIL-HDBK-217F Ta=25°C, full load (G/B, controlled environment)
95
MIL-STD-810F
MIL-STD-810F
6,444,000 hours
PHYSICAL SPECIFICATIONS
Weight
Case Material
0.48oz (14g)
1.25x0.80x0.40 inches
(31.8x20.3x10.2mm)
Non-conductive black plastic
Base Material
Non-conductive black plastic
Dimensions (L x W x H)
Potting Material
Silicon (UL94-V0)
SAFETY & EMC CHARACTERISTICS
Safety Approvals (pending)
EMI (See Note 2)
ANSI/AAMI ES60601-1, IEC60601-1, EN60601-1, UL60950-1, EN60950-1, IEC60950-1
Radiated Immunity
EN55011, EN55022, and FCC Part 18
Air ±8kV
EN61000-4-2
Contact ±6kV
EN61000-4-3
10 V/m
Fast Transient (See Note 3)
EN61000-4-4
±2kV
Perf. Criteria A
Surge (See Note 3)
EN61000-4-5
±2kV
Perf. Criteria A
Conducted Immunity
EN61000-4-6
Perf. Criteria A
Power Frequency Magnetic Field
EN61000-4-8
10 Vrms
100A/m continuous;
1000 A/m 1 second
ESD
Class A, Class B
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
NOTES
1. The “x” in the model number represents the Pin Connection type. It can be “A” for pin connection type A or “B” for pin connection type B.
See mechanical drawings on page 4 for more information.
2. The DCMOPW03 series meets EMI Class A without an external filter added. This series can only meet EMI Class B with external
components added. Please contact factory for more information.
3. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
• For 24VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series,
470µF/50V) in parallel.
• For 48VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series,
330µF/100V) in parallel.
4. Remote ON/OFF control is optional and is only available for “B” type pin connection models. To order the converter with remote
ON/OFF add the suffix “-P” to the model number (Ex: DCMOPW03-48S12B-P).
5. Trim function is optional and is only available for “B” type pin connection models. To order the converter with Trim pin add the suffix “-T”
to the model number (Ex: DCMOPW03-48S12B-T).
CAUTION: This power module is not internally fused. An input line fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
01/28/2016
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 5
Rev B
DCMOPW03 SERIES
3 Watt Medical
DC/DC Power Converters
CHARACTERISTIC CURVES
DCMOPW03-48S05A Derating Curve
DCMOPW03-48S05A Efficiency vs Input Voltage
DCMOPW03-48S05A Efficiency vs Output Load
MECHANICAL DRAWINGS
A Type Pin Connection (Suffix “A”)
B Type Pin Connection (Suffix “B”)
01/28/2016
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 5
DCMOPW03 SERIES
3 Watt Medical
DC/DC Power Converters
Rev B
MODEL NUMBER SETUP
DCMOPW
Series Name
03
-
Output
Power
03: 3 Watts
48
S
05
B
Output Quantity
Output Voltage
Pin
Connection
24: 24 VDC S: Single Output
33: 3.3 VDC
A: A Type
48: 48 VDC
05: 5 VDC
B: B Type
Input Voltage
P (1)
T (1)
Remote ON/OFF Option
Trim Option
-
No Remote
ON/OFF
P: Remote ON/OFF
None:
None
No Trim
:
T: Trim
12: 12 VDC
15: 15 VDC
24: 24 VDC
D: Dual Output
05: ±5 VDC
12: ±12 VDC
15: ±15 VDC
(1) Remote ON/OFF Control and Trim options are only available for “B” type pin connection models.
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
01/28/2016
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 5 of 5
Similar pages