4 ITEM 3 CONNECTOR PART NO. 2 IPI CHECK DESCRIPTION 1 See Table 1 KR CONNECTOR 2 UL1061, 26 AWG BLUE 1 EOR CHECK Applicable Tooling BCD TABLE 1 ITEM 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D C NUMBER OF CIRCUITS 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CONNECTOR PART NO. 02KR-6S-P 03KR-6S-P 04KR-6S-P 05KR-6S-P 06KR-6S-P 07KR-6S-P 08KR-6S-P 09KR-6S-P 10KR-6S-P 11KR-6S-P 12KR-6S-P 13KR-6S-P 14KR-6S-P 15KR-6S-P 16KR-6S-P ASSEMBLY PART NUMBER A02KR02KR26E152B A03KR03KR26E152B A04KR04KR26E152B A05KR05KR26E152B A06KR06KR26E152B A07KR07KR26E152B A08KR08KR26E152B A09KR09KR26E152B A10KR10KR26E152B A11KR11KR26E152B A12KR12KR26E152B A13KR13KR26E152B A14KR14KR26E152B A15KR15KR26E152B A16KR16KR26E152B TOTAL WIRE REQUIRED 304.8 mm 457.2 mm 609.6 mm 762 mm 914.4 mm 1,066.8 mm 1,219.2 mm 1,371.6 mm 1,524 mm 1,676.4 mm 1,828.8 mm 1,981.2 mm 2,133.6 mm 2,286 mm 2,438.4 mm C (162.7 +/- 3.0) 152.4 +/- 3.0 1 D 1 PIN 1 2.0 PIN 1 2 B B SCALE 1: 1 DIMENSIONS CUSTOMER NAME All dimensions are in MM with a tolerance of +/- 3.0 unless otherwise specified. A DRAWN BY A DESCRIPTION 2.0 mm Pitch KR Standard Catalog Assembly - 6" Overall Len gth – Pin out: 1 to N ASSEMBLY PART NO. STEVEN PILKINGTON REV. DESCRIPTION 4 DATE 3 BY CUSTOMER PART NO. CHECK ED BY SEE TABLE 1 DRAWING NO. & REVISION JUSTIN BAKER 2 REVISED GAM-026 3/4/2016 1