Cree® XLamp® CXB2530 LED Product Description features Table of Contents The XLamp® CXB2530 LED Array is a • 19‑mm optical source Characteristics.............................................2 member of the second generation of • Mechanical and optical design Operating Limits...........................................2 consistent with other CXA25 and Flux Characteristics, EasyWhite® Order CXB25 LEDs Codes and Bins............................................3 Available in 70-, 80- and 90-minimum Relative Spectral Power Distribution..........5 CRI options Electrical Characteristics.............................6 the CXA family that delivers up to 30% higher efficacy and up to 20% higher lumens than the first generation in the • same LES. The higher performance • Cree EasyWhite 2-, 3‑ and 5-step Relative Luminous Flux vs. Current.............7 binning Typical Spatial Distribution..........................8 to existing CXA LED designs to shorten • Forward voltage option: 36‑V class Performance Groups - Brightness..............8 product development time. In addition, • 85 °C binning and characterization Performance Groups - Chromaticity...........9 the CXB LEDs also allow lighting • Extremely uniform color over viewing Cree EasyWhite® Bins Plotted on the second generation CXA LED Arrays provide a drop-in performance upgrade ® angle 1931 CIE Color Space............................... 10 or better performance with a smaller • Top-side solder connections Bin and Order Code Formats.................... 12 LES, enabling a smaller, more impactful • Thermocouple attach point Mechanical Dimensions........................... 12 luminaire. Available in 2‑step, 3‑step and • NEMA SSL-3 2011 standard flux bins Thermal Design......................................... 13 5‑step EasyWhite bins, the CXB2530 • RoHS and REACh compliant Notes......................................................... 14 LED delivers high lumen output and • UL® recognized component Packaging.................................................. 15 manufacturers to achieve the same ® high efficacy in a single, easy‑to‑use CLD-DS122 Rev 1C Product family data sheet (E349212) package that eliminates the need for reflow soldering. The CX Family LED Design Guide provides basic information on the requirements to use the CXB2530 LED www.cree.com/Xlamp successfully in luminaire designs. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp ® CXB2530 LED Characteristics Characteristics Unit Viewing angle (FWHM) Typical degrees ESD classification (HBM per Mil-Std-883D) Maximum 115 V 8000 DC forward current mA 1600* Reverse current mA 0.1 Forward voltage (@ 800 mA, 85 °C) * Minimum V 35 38 Refer to the Operating Limits section. Operating Limits The maximum current rating of the CXB2530 is dependent on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. The graph shown below assumes that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions section on page CXB2530 12 for the location of the Tc measurement point. 1800 1600 1400 If (mA) 1200 1000 800 600 400 200 0 0 25 50 75 100 125 150 Case Temperature (°C) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® CXB2530 LED Flux Characteristics, EasyWhite® Order Codes and Bins (If = 800 mA, TJ = 85 °C) The following table provides order codes for XLamp CXB2530 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 12). Nominal CCT CRI* Min 70 Minimum Luminous Flux Typ --- 6500 K 80 70 70 --- 90 Order Code Group Order Code --- Group 5-Step Order Code Group Order Code CXB2530-0000000N0BU265E U2 3680 4063 U4 3955 4366 V2 4230 4670 CXB2530-0000000N0BV265E U2 3680 4063 CXB2530-0000000N0HU265E U4 3955 4366 CXB2530-0000000N0HU465E U2 3680 4063 CXB2530-0000000N0BU257E U4 3955 4366 V2 4230 4670 U2 3680 4063 65E 65E 57E CXB2530-0000000N0BU465E CXB2530-0000000N0BU457E CXB2530-0000000N0BV257E --- 5000 K 80 Flux (lm) Flux (lm) Group @ 85 °C @ 25 °C** 3-Step --- 5700 K 80 Group 2-Step 57E CXB2530-0000000N0HU257E U4 3955 4366 CXB2530-0000000N0HU457E U2 3680 4063 CXB2530-0000000N0BU250E U4 3955 4366 V2 4230 4670 U2 3680 4063 U4 3955 4366 T4 3440 3798 --- 50E CXB2530-0000000N0BV250E 50G 92 50G U2 3680 4063 CXB2530-0000000N0BU450E CXB2530-0000000N0HU250G CXB2530-0000000N0HU450G 50E CXB2530-0000000N0HU250E CXB2530-0000000N0HU450E CXB2530-0000000N0UT450G CXB2530-0000000N0UU250G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 14). • Cree XLamp CXB2530 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® CXB2530 LED Flux Characteristics, EasyWhite® Order Codes and Bins (If = 800 mA, TJ = 85 °C) - Continued Nominal CCT CRI* Min 70 Minimum Luminous Flux Typ --- 4000 K 80 90 80 Group 2-Step Flux (lm) Flux (lm) Group @ 85 °C @ 25 °C** U2 3680 4063 U4 3955 4366 V2 4230 4670 U2 3680 4063 --- 80 90 4366 CXB2530-0000000N0HU440H T2 3200 3533 CXB2530-0000000N0UT240H T4 3440 3798 CXB2530-0000000N0UT440H T4 3440 3798 CXB2530-0000000N0HT435H U2 3680 4063 CXB2530-0000000N0HU235H S4 2990 3301 CXB2530-0000000N0US435H T2 3200 3533 CXB2530-0000000N0UT235H T4 3440 3798 CXB2530-0000000N0HT430H U2 3680 4063 S4 2990 3301 40H 35H 90 80 35H --- 30H 92 3000 K 92 30H CXB2530-0000000N0HU230H CXB2530-0000000N0US430H CXB2530-0000000N0UT230H T2 3200 3533 S2 2780 3069 S4 2990 3301 T2 3200 3533 T2 3200 3533 T4 3440 3798 CXB2530-0000000N0HT427H S2 2780 3069 CXB2530-0000000N0US227H S4 2990 3301 --- 40G 40G 35G 35G 30G 30G 30Q Group Order Code CXB2530-0000000N0BU440E CXB2530-0000000N0HU240G CXB2530-0000000N0HU440G CXB2530-0000000N0UT240G CXB2530-0000000N0UT440G CXB2530-0000000N0HT435G CXB2530-0000000N0HU235G CXB2530-0000000N0US435G CXB2530-0000000N0UT235G CXB2530-0000000N0HT430G CXB2530-0000000N0HU230G CXB2530-0000000N0US430G CXB2530-0000000N0UT230G CXB2530-0000000N0US430Q CXB2530-0000000N0UT230Q 27H 92 Order Code CXB2530-0000000N0US230U 2700 K 90 CXB2530-0000000N0HU240H 3955 92 Group CXB2530-0000000N0BV240E U4 --- Order Code 40E 40H 92 Group 5-Step CXB2530-0000000N0BU240E 3500 K 90 Order Code 3-Step 27H CXB2530-0000000N0HT227H CXB2530-0000000N0US427H 27G 27G 30U CXB2530-0000000N0US430U CXB2530-0000000N0UT230U CXB2530-0000000N0HT227G CXB2530-0000000N0HT427G CXB2530-0000000N0US227G CXB2530-0000000N0US427G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 14). • Cree XLamp CXB2530 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® CXB2530 LED Relative Spectral Power Distribution Relative Spectral Power Distribution The following graph is the result of a series of pulsed measurements at 800 mA and TJ = 85 °C. 100% Relative Spectral Power 90% 80% 70% 60% 5000 K, 70 CRI 50% 4000 K, 70 CRI 40% 3000 K, 80 CRI 30% 20% 10% 0% 380 430 480 530 Relative Spectral Power Distribution 580 630 680 730 780 Wavelength (nm) 100% Relative Spectral Power 90% 80% 70% 60% 30G, 3000 K, 90 CRI 50% 30Q, 3000 K, 90 CRI 40% 30U, 3000 K, 90 CRI 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® CXB2530 LED Electrical Characteristics The following graph is the result of a series of steady-state measurements. 39 38 Voltage (V) 37 Tc = 25 °C 36 Tc = 55 °C Tc = 85 °C 35 Tc = 105 °C 34 33 32 300 560 820 1080 1340 1600 Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® CXB2530 LED Relative Luminous Flux vs. Current (TJ = 85 °C) The relative luminous flux values provided below are the ratio of measurements of the CXB2530 LED at steady-state operation at the given conditions, divided by flux measured during binning, which is a pulsed measurement at 800 mA at TJ = 85 °C. For example, at steady-state operation of Tc = 25 °C, IF = 1080 mA, the relative luminous flux ratio is 140% in the chart below. A CXB2530 LED that measures 3200 lm during binning will deliver 4480 lm (3200 * 1.4) at steady-state operation of Tc = 25 °C, IF = 1080 mA. 200% 180% Relative Luminous Flux 160% 140% Tc = 25 °C 120% Tc = 55 °C 100% Tc = 85 °C 80% Tc = 105 °C 60% 40% 20% 0% 300 560 820 1080 1340 1600 Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7 XLamp ® CXB2530 LED Far Field Typical Spatial Distribution Relative Luminous Intensity (%) 100% 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle (º) Performance Groups - Brightness (If = 800 mA, Tj = 85 °C) XLamp CXB2530 LEDs are tested for luminous flux and placed into one of the following bins. Group Code Minimum Luminous Flux Maximum Luminous Flux S2 2780 2990 S4 2990 3200 T2 3200 3440 T4 3440 3680 U2 3680 3955 U4 3955 4230 V2 4230 4545 V4 4545 4860 Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® CXB2530 LED Performance Groups - Chromaticity (Tj = 85 °C) XLamp CXB2530 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 2-Step Code 40H 35H 30H 27H CCT 4000 K 3500 K 3000 K 2700 K x y 0.3777 0.3739 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 EasyWhite Color Temperatures – 3-Step Ellipse Center Point Major Axis Minor Axis x y a b Rotation Angle (°) 5000 K 0.3447 0.3553 0.00840 0.00312 65.0 4000 K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500 K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000 K 0.4338 0.4030 0.00834 0.00408 53.2 30Q 3000 K 0.4305 0.3935 0.00834 0.00408 53.2 30U 3000 K 0.4274 0.3837 0.00834 0.00408 53.2 27G 2700 K 0.4577 0.4099 0.00834 0.00420 48.5 Major Axis Minor Axis y a b Rotation Angle (°) Bin Code CCT 50G 40G EasyWhite Color Temperatures – 5-Step Ellipse Bin Code CCT Center Point x 65E 6500 K 0.3123 0.3282 0.01110 0.00550 61.0 57E 5700 K 0.3287 0.3417 0.01230 0.00600 72.0 50E 5000 K 0.3447 0.3553 0.01400 0.00520 65.0 40E 4000 K 0.3818 0.3797 0.01565 0.00670 53.7 Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® CXB2530 LED Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.44 2700 K ANSI C78.377 Quadrangle 0.43 3000 K EasyWhite 5-step EasyWhite 3-step 0.42 3500 K EasyWhite 2-step 0.41 4000 K 0.40 4500 K CCy 0.39 5000 K 0.38 0.37 5700 K 0.36 6500 K 0.35 0.34 0.33 0.32 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.31 CCx Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® CXB2530 LED Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) - Continued 0.44 2700 K ANSI C78.377 Quadrangle 0.43 3000 K 30Q, 30U 0.42 3500 K 0.41 4000 K 0.40 4500 K 30Q 0.39 CCy 30U 5000 K 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.31 CCx Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® CXB2530 LED Bin and Order Code Formats Bin codes and order codes are configured as follows: Order CodeBin Code Series = CXB25 Series = CXB25 Internal code Chromaticity bin CRI Specification B = 70 min CRI H = 80 min CRI U = 90 min CRI Vf class N0 = 36-V class Internal code SSSSSCC-WWW-FF-GGR-AAAAA SSSSSCC-HHHH-HHHGGRNNNNN CRI Specification B = 70 min CRI H = 80 min CRI U = 90 min CRI Kit code Vf class N0 = 36-V class Flux bin Performance class Performance class Mechanical Dimensions Dimensions are in mm. Tolerances unless otherwise specified: +.13 x° +1° B2530N = 36‑V CXB2530 B2530N Meaning of B2530N Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 12 XLamp ® CXB2530 LED Thermal Design The CXB family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to ensure the CXB LED is being operated within its designed limits. Please refer to page 2 for the Operating Limit specification. There is no need to calculate for TJ inside the package, as the thermal management design process, specifically from solder point (TSP) solder point (TSP) to ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to the Thermal Management application note. For CXB soldering recommendations and more information on thermal interface materials (TIM) and connection methods, please refer to the Cree XLamp CX Family LEDs soldering and handling document. The CX Family LED Design Guide provides basic information on the requirements to use Cree XLamp CXB LEDs successfully in luminaire designs. To keep the CXB2530 LED at or below the maximum rated Tc, the case to ambient temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following R_j-c R_j-c scale. Tc Tc As the figure at right shows, the R_c-a value is the sum of the thermal resistance of the TIM (R_tim) R_tim graph, depending on the operating environment. The y‑axis in the graph is a base 10 logarithmic R_c-a plus the thermal resistance of the heat sink (R_hs). R_hs CXB2530 Ta Ta 100.00 Maximum R_c-a 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 300 560 820 1080 1340 1600 Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 13 XLamp ® CXB2530 LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14 XLamp ® CXB2530 LED Packaging 6 Cree CXB2530 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton, for a total of 100 5 4 3 LEDs per carton. Each carton contains 100 LEDs from the same performance bin. 2 NOTICE NTIAL. THIS PLOT AND THE INFORMATION THIN ARE THE PROPRIETARY AND NFORMATION OF CREE, INC. THIS PLOT PIED, REPRODUCED OR DISCLOSED TO ANY D PERSON WITHOUT THE WRITTEN CONSENT Dimensions are in inches. Tolerances: +.13 x° +1° 7.125 4 5 5 R .375 4 3 2 3 1 2 1 E PLOT AND THE INFORMATION E PROPRIETARY AND ON OF CREE, INC. THIS PLOT NSENT ODUCED OR DISCLOSED TO ANY WITHOUTTHE WRITTEN CONSENT 5.875 1.188 7.125 R.375 R .375 7.625 .875 1.188 7.625 .38 1.188 LABEL WITH CREE BIN CODE, QUANTITY, LOT # BAG PATENT LABEL IS LOCATED ON UNDERSIDE OF COVER PATENT LABEL IS LOCATED ON UNDERSIDE OF CARTON 1.188 LABEL WITH CREE BIN CODE, QTY, LOT# TH CREE BIN ANTITY, LOT # .38 BAG BAG .38 .875 LABEL WITH CREE BIN CODE, QUANTITY, LOT # PATENT LABEL IS LOCATED ON UNDERSIDE OF CARTON L IS LOCATED IDE OF COVER LABEL WITH CREE BIN CODE, QTY, LOT# LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QUANTITY, LOT # UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: .X ± .XX ± .XXX ± X° ± THIRD ANGLE PROJECTION 0.1 .05 .005 1 ° 6 5 .X ± .XX 3± .XXX ± X° ± 4 THIRD ANGLE PROJECTION WITH CREE BIN QUANTITY, LOT # Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 4 THIRD ANGLE PROJECTION 0.1 .05 .005 1° APPROVED .X ± .XX ± .XXX ± X° ± X° 0.1 ± .05 .005 1 ° FOR SHEET METAL PARTS ONLY .X ± .06 2° DATE APPROVED DATE TITLE CXA25X SIZE MATERIAL APPROVED SCALE DRAWING NO. SIZE 4600 Silicon Drive Durham, N.C 27703 CXA25XX_DATASHEET_BAG2013 Cand the trademarks Cree logo is a R Phone (919) 361-4770 SCALE DATE Fax (919) 313-5303 SHEET 0.500 TITLE 1 CXA15XX_DATASHEET 15 MATERIAL SIZE FINAL PROTECTIVE FINISH Phone (919) 361-477 Fax (919) 313-5303 0.500 CXA25XX_DATASHEET DATE 2 DRAWING 2 TITLE DRAWN BY C 4600 Silicon Drive CXA25 Durham, N.C 27703 FINAL PROTECTIVE FINISH DATE UNLESS OTHERWISE SPECIFIED FOR SHEET DIMENSIONS ARE INMETAL PARTS ONLY .X ± .06 CHECK DATE MILLIMETERS & BEFORE FINISH. FINAL PROTECTIVE FINISH .XX ® ± ® notice. Cree , XLamp and .03 EasyWhite® are registered TOLERANCE UNLESS SPECIFIED: .XXX ± .010 3 DATE MATERIAL FOR SHEET METAL PARTS DATE ONLY DRAWN BY UNLESS OTHERWISE SPECIFIED .X ± .06 DIMENSIONS ARE IN .XX ± .03 CHECK DATE MILLIMETERS & BEFORE FINISH. .XXX ± .010 TOLERANCE UNLESS SPECIFIED: X° ± 2 ° LABEL WITH CREE BIN CODE, QTY, LOT# DRAWN BY CHECK DRAWING NO. CXA15XX_DATASHEET_BAG2013 OF