Multilayer ceramic capacitor X7R Series/Type: Chip Ordering code: B37921... Date: 2005-12-05 Content of inside pages of data sheet. Data will be automatically entered into headers and footers. Please fill in the table and then change the colour to “White”. This ensures that the table disappears for the customer pdf. Identification/Classification 1: (header 1) Multilayer ceramic capacitor Identification/Classification 2: (header 2) HighCV, X7R 1206 50 V Ordering code: B37872K5105K0** Series/Type: Chip Preliminary data (optional): (if necessary) Department: KB VS PE Date: 25.10.2005 Prepared by: Release signed PE: Release signed QS: Modifications/Remarks: Mr. Huainig Dr. Engel Dr. Slakhorst xx xx xx © EPCOS AG 2005. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Chip Multilayer ceramic capacitors X7R Features ■ ■ ■ ■ High volumetric efficiency Non-linear capacitance change High insulation resistance High pulse strength Applications ■ Blocking and coupling ■ Decoupling ■ Interference suppression Termination ■ For soldering: Nickel-barrier termination (Ni) for case sizes 0402 to 1210 Silver-palladium termination (AgPd) for case sizes 1812 and 2220 (capacitance values ≤1 μF) ■ For conductive adhesion: Silver-palladium termination (AgPd) for all case sizes on request Options ■ Alternative capacitance tolerances available on request Delivery mode ■ Cardboard and blister tape (blister tape for chip thickness ≥1.2 ±0.1 mm and case sizes ≥1210), 180-mm and 330-mm reel available ■ Bulk case for case sizes 0603 (16 V, 25 V, 50 V) and 0805 (50 V) Electrical data Temperature characteristic Climatic category (IEC 60068-1) Standard Dielectric Rated voltage1) Test voltage Capacitance range2) / E series Max. relative capacitance change Dissipation factor (limit value) VR Vtest CR ΔC/C tan δ Insulation resistance 3) at + 25 °C Insulation resistance 3) at +125 °C Time constant 3) at + 25 °C Time constant 3) at +125 °C Operating temperature range Ageing 4) Rins Rins τ τ Top 1) Note: No operation on AC line. 2) See also HighCap series in data book or Internet Please read Cautions and warnings and 2 Important notes at the end of this document. 2 X7R 55/125/56 EIA Class 2 10, 16, 25, 50,100, 200, 500 2.5 · VR/5 s 100 pF … 1 µF (E3/E6) ±15 <25 · 10 –3 <35 · 10 –3 for 16 V >105 >104 >1000 >100 –55 … +125 yes VDC VDC % MΩ MΩ s s °C 3) For C R >10 nF the time constant τ = C · Rins is given. 4) Refer to data book 2003 “General Techn. Inform.”, page 197. 2 12/0505 Multilayer ceramic capacitors X7R X7R Capacitance tolerances Code letter J K M (standard) Tolerance ±5% ±10% ±20% Dimensional drawing s b k k KKE0329-N Dimensions (mm) Case size 0402 1005 0603 1608 0805 2012 1206 3216 l 1.0 ±0.10 1.6 ±0.15 2.0 ±0.20 3.2 ±0.20 b 0.5 ±0.05 0.8 ±0.10 1.25 ±0.15 1.6 ±0.15 s 0.5 ±0.05 0.8 ±0.10 1.35 max. 1.30 max. k 0.1 –0.4 0.1 –0.4 0.13 –0.75 0.25 –0.75 1210 3225 1812 4532 2220 5750 l 3.2 ±0.30 4.5 ±0.30 5.7 ±0.40 b 2.5 ±0.30 3.2 ±0.30 5.0 ±0.40 s 1.70 max. 1.30 max. 1.30 max. k 0.25 –0.75 0.25 –1.0 0.25 –1.0 Case size (inch) (mm) (inch) (mm) Tolerances to CECC 32101-801 Please read Cautions and warnings and Important notes at the end of this document. 3 12/05 Multilayer ceramic capacitors X7R X7R Recommended solder pad C A D KKE0308-1 Maximum dimensions (mm) Case size (inch/mm) Type A C D 0402/1005 single chip 0.6 1.7 0.6 0603/1608 single chip 1.0 3.0 1.0 0805/2012 single chip 1.2 3.4 1.3 1206/3216 single chip 1.2 4.5 1.8 1210/3225 single chip 1.2 4.5 2.8 1812/4532 single chip 1.5 6.0 3.6 2220/5750 single chip 1.5 7.2 5.5 Termination Termination (nickel barrier) Ceramic body Inner electrode NME AgPd BME Ni Substrate electrode Intermediate electrode External electrode NME Ag Ni Sn BME Cu Ni Sn NME: Noble Metal Electrode BME: Base Metal Electrode KKE0485-5-E Please read Cautions and warnings and Important notes at the end of this document. 4 12/05 Multilayer ceramic capacitors X7R X7R Product range chip capacitors X7R Size1) inch mm Type VR (VDC) CR 100 pF 150 pF 220 pF 330 pF 470 pF 680 pF 10 0402 1005 0603 1608 B37921 B37931 16 25 50 10 16 25 50 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 100 nF 150 nF 220 nF 2) 2) 1) l × b (inch) / l × b (mm) 2) See HighCV product range. Please read Cautions and warnings and Important notes at the end of this document. 5 12/05 2) 100 Multilayer ceramic capacitors X7R X7R Product range chip capacitors X7R Size1) inch mm Type VR (VDC) CR 100 pF 220 pF 330 pF 470 pF 680 pF 820 pF 16 0805 2012 1206 3216 B37941 B37872 25 50 100 200 16 25 50 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 100 nF 150 nF 220 nF 2) 2) 330 nF 2) 2) 470 nF 2) 2) 1.0 μF 2) 2) 2) 2.2 μF 2) 2) 2) 2) 1) l × b (inch) / l × b (mm) 2) See HighCV product range. Please read Cautions and warnings and Important notes at the end of this document. 6 12/05 2) 100 200 500 Multilayer ceramic capacitors X7R X7R Product range chip capacitors X7R Size1) inch mm Type VR (VDC) CR 25 50 1210 3225 1812 4532 2220 5750 B37950 B37953 B37956 50 50 100 200 1.0 nF 1.5 nF 2.2 nF 3.3 nF 3.9 nF 4.7 nF 6.8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 100 nF 150 nF 220 nF 330 nF 470 nF 1) l × b (inch) / l × b (mm) 2) See HighCV product range. Please read Cautions and warnings and Important notes at the end of this document. 7 12/05 500 Multilayer ceramic capacitors X7R X7R; 0402 Ordering codes and packing for X7R, 10, 16, 25 and 50 VDC, nickel-barrier terminations Chip thickness CR1) Ordering code 2) mm Cardboard tape, ∅ 180-mm reel ** ^ 60 pcs./reel Cardboard tape, ∅ 330-mm reel ** ^ 70 pcs./reel 0.5 ± 0.05 0.5 ± 0.05 10000 10000 50000 50000 0.5 ± 0.05 0.5 ± 0.05 10000 10000 50000 50000 0.5 ± 0.05 0.5 ± 0.05 10000 10000 50000 50000 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 0.5 ± 0.05 10000 10000 10000 10000 10000 50000 50000 50000 50000 50000 Case size 0402, 10 VDC 33, nF 47. nF B37921K8333K0** B37921K8473K0** Case size 0402, 16 VDC 10, nF 22. nF B37921K9103K0** B37921K9223K0** Case size 0402, 25 VDC 4.7 nF 6.8 nF B37921K0472K0** B37921K0682K0** Case size 0402, 50 VDC 220. pF 470. pF 1.0 nF 2.2 nF 3.3 nF B37921K5221K0** B37921K5471K0** B37921K5102K0** B37921K5222K0** B37921K5332K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 3. Please read Cautions and warnings and Important notes at the end of this document. 8 12/05 Multilayer ceramic capacitors X7R X7R; 0603 Ordering codes and packing for X7R, 16 and 25 VDC, nickel-barrier terminations Chip thickness Ordering code 2) CR1) mm Cardboard tape, ∅ 180-mm reel ** ^ 60 pcs./reel Cardboard tape, Bulk case ∅ 330-mm reel ** ^ 70 ** ^ 01 pcs./reel pcs. 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 4000 4000 4000 4000 4000 16000 16000 16000 16000 16000 15000 15000 15000 15000 15000 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 4000 4000 4000 4000 4000 4000 4000 16000 16000 16000 16000 16000 16000 16000 15000 15000 15000 15000 15000 15000 15000 Case size 0603, 16 VDC 22, 33. 47. 68. 100. nF nF nF nF nF B37931K9223K0** B37931K9333K0** B37931K9473K0** B37931K9683K0** B37931K9104K0** Case size 0603, 25 VDC 10. 15. 22. 33. 47. 68. 100. nF nF nF nF nF nF nF B37931K0103K0** B37931K0153K0** B37931K0223K0** B37931K0333K0** B37931K0473K0** B37931K0683K0** B37931K0104K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 3. Please read Cautions and warnings and Important notes at the end of this document. 9 12/05 Multilayer ceramic capacitors X7R X7R; 0603 Ordering codes and packing for X7R, 50 and 100 VDC, nickel-barrier terminations Chip thickness CR1) Ordering code 2) mm Cardboard tape, ∅ 180-mm reel ** ^ 60 pcs./reel Cardboard tape, Bulk case ∅ 330-mm reel ** ^ 70 ** ^ 01 pcs./reel pcs. 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 – – – – – – – – – – – Case size 0603, 50 VDC 220. pF 330. pF 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 33. nF 47. nF B37931K5221K0** B37931K5331K0** B37931K5471K0** B37931K5681K0** B37931K5102K0** B37931K5152K0** B37931K5222K0** B37931K5332K0** B37931K5472K0** B37931K5682K0** B37931K5103K0** B37931K5153K0** B37931K5223K0** B37931K5333K0** B37931K5473K0** Case size 0603, 100 VDC 100. pF 150. pF 220. pF 330. pF 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF B37931K1101K0** B37931K1151K0** B37931K1221K0** B37931K1331K0** B37931K1471K0** B37931K1681K0** B37931K1102K0** B37931K1152K0** B37931K1222K0** B37931K1332K0** B37931K1472K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 3. Please read Cautions and warnings and Important notes at the end of this document. 10 12/05 Multilayer ceramic capacitors X7R X7R; 0805 Ordering codes and packing for X7R, 25 and 50 VDC, nickel-barrier terminations Chip thickness CR1) Ordering code 2) mm Cardboard tape, ∅ 180-mm reel ** ^ 60 pcs./reel Cardboard tape, Bulk case ∅ 330-mm reel ** ^ 70 ** ^ 01 pcs./reel pcs. 1.25 ± 0.1 30003) 12000 4) – 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.8 ± 0.1 1.25 ± 0.1 0.8 ± 0.1 1.25 ± 0.1 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 4000 3000 3) 4000 3000 3) 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 16000 12000 4) 16000 12000 4) 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 – – – – Case size 0805, 25 VDC 100, nF B37941K0104K0** Case size 0805, 50 VDC 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 33. nF 47. nF 68. nF 68. nF 100. nF 100. nF B37941K5471K0** B37941K5681K0** B37941K5102K0** B37941K5152K0** B37941K5222K0** B37941K5332K0** B37941K5472K0** B37941K5682K0** B37941K5103K0** B37941K5153K0** B37941K5223K0** B37941K5333K0** B37941K5473K0** B37941K5683K0** B37941K5683K0** B37941K5104K0** B37941K5104K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 3. 3) Blister tape, 180-mm reel, ordering code ** ^ 62 4) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 11 12/05 Multilayer ceramic capacitors X7R X7R; 0805 Ordering codes and packing for X7R, 100 and 200 VDC, nickel-barrier terminations Chip thickness CR1) Ordering code 2) mm Cardboard tape, ∅ 180-mm reel ** ^ 60 pcs./reel Cardboard tape, ∅ 330-mm reel ** ^ 70 pcs./reel 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.6 ± 0.1 0.8 ± 0.1 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 4000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 16000 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 3000 3) 3000 3) 16000 16000 16000 16000 16000 16000 16000 16000 12000 4) 12000 4) Case size 0805, 100 VDC 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF B37941K1471K0** B37941K1681K0** B37941K1102K0** B37941K1152K0** B37941K1222K0** B37941K1332K0** B37941K1472K0** B37941K1682K0** B37941K1103K0** B37941K1153K0** B37941K1223K0** Case size 0805, 200 VDC 220. pF 330. pF 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF B37941K2221K0** B37941K2331K0** B37941K2471K0** B37941K2681K0** B37941K2102K0** B37941K2152K0** B37941K2222K0** B37941K2332K0** B37941K2472K0** B37941K2682K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 3. 3) Blister tape, 180-mm reel, ordering code ** ^ 62 4) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 12 12/05 Multilayer ceramic capacitors X7R X7R; 1206 Ordering codes and packing for X7R, 50 and 100 VDC, nickel-barrier terminations Chip thickness CR1) Ordering code 2) mm Cardboard tape, ∅ 180-mm reel ** ^ 60 pcs./reel Cardboard tape, ∅ 330-mm reel ** ^ 70 pcs./reel 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 30003) 30003) 30003) 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 12000 4) 12000 4) 12000 4) 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 3) 3000 3) 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 12000 4) 12000 4) Case size 1206, 50 VDC 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 33. nF 47. nF 68. nF 100. nF 220. nF 330. nF 470. nF B37872K5102K0** B37872K5152K0** B37872K5222K0** B37872K5332K0** B37872K5472K0** B37872K5682K0** B37872K5103K0** B37872K5153K0** B37872K5223K0** B37872K5333K0** B37872K5473K0** B37872K5683K0** B37872K5104K0** B37872K5224K0** B37872K5334K0** B37872K5474K0** Case size 1206, 100 VDC 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 33. nF 47. nF 68. nF 100. nF B37872K1102K0** B37872K1152K0** B37872K1222K0** B37872K1332K0** B37872K1472K0** B37872K1682K0** B37872K1103K0** B37872K1153K0** B37872K1223K0** B37872K1333K0** B37872K1473K0** B37872K1683K0** B37872K1104K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 3. 3) Blister tape, 180-mm reel, ordering code ** ^ 62 4) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 13 12/05 Multilayer ceramic capacitors X7R X7R; 1206 Ordering codes and packing for X7R, 200 and 500 VDC, nickel-barrier terminations Chip thickness CR1) Ordering code 2) mm Cardboard tape, ∅ 180-mm reel ** ^ 60 pcs./reel Cardboard tape, ∅ 330-mm reel ** ^ 70 pcs./reel 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 4000 4000 4000 3000 3) 3000 3) 16000 16000 16000 16000 16000 16000 16000 16000 12000 4) 12000 4) 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 3000 3) 3000 3) 16000 16000 16000 16000 16000 12000 4) 12000 4) Case size 1206, 200 VDC 820. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF B37872K2821K0** B37872K2102K0** B37872K2152K0** B37872K2222K0** B37872K2332K0** B37872K2472K0** B37872K2682K0** B37872K2103K0** B37872K2153K0** B37872K2223K0** Case size 1206, 500 VDC 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF B37872K3471K0** B37872K3681K0** B37872K3102K0** B37872K3152K0** B37872K3222K0** B37872K3332K0** B37872K3472K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 3. 3) Blister tape, 180-mm reel, ordering code ** ^ 62 4) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 14 12/05 Multilayer ceramic capacitors X7R X7R; 1210 Ordering codes and packing for X7R, 50, 100, 200 and 500 VDC, nickel-barrier terminations Chip thickness Ordering code 2) CR1) mm Blister tape, ∅ 180-mm reel ** ^ 62 pcs./reel Blister tape, ∅ 330-mm reel ** ^ 72 pcs./reel 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 3000 3000 16000 16000 16000 16000 12000 12000 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 4000 4000 4000 4000 4000 4000 4000 3000 16000 16000 16000 16000 16000 16000 16000 12000 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 1.6 ± 0.1 4000 4000 4000 4000 4000 3000 3000 2000 16000 16000 16000 16000 16000 12000 12000 8000 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 1.6 ± 0.1 4000 4000 4000 4000 3000 3000 2000 16000 16000 16000 16000 12000 12000 8000 Case size 1210, 50 VDC 10. 22. 47. 100. 220. 470. nF nF nF nF nF nF B37950K5103K0** B37950K5223K0** B37950K5473K0** B37950K5104K0** B37950K5224K0** B37950K5474K0** Case size 1210, 100 VDC 10, 15. 22. 33. 47. 68. 100. 150. nF nF nF nF nF nF nF nF B37950K1103K0** B37950K1153K0** B37950K1223K0** B37950K1333K0** B37950K1473K0** B37950K1683K0** B37950K1104K0** B37950K1154K0** Case size 1210, 200 VDC 3.9 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 33. nF 47. nF B37950K2392K0** B37950K2472K0** B37950K2682K0** B37950K2103K0** B37950K2153K0** B37950K2223K0** B37950K2333K0** B37950K2473K0** Case size 1210, 500 VDC 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF B37950K3102K0** B37950K3152K0** B37950K3222K0** B37950K3332K0** B37950K3472K0** B37950K3682K0** B37950K3103K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 3. Please read Cautions and warnings and Important notes at the end of this document. 15 12/05 Multilayer ceramic capacitors X7R X7R; 1812 and 2220 Ordering codes and packing for X7R, 50 VDC, silver-palladium terminations Chip thickness CR1) Ordering code 2) mm Blister tape, ∅ 180-mm reel ** ^ 62 pcs./reel Blister tape, ∅ 330-mm reel ** ^ 72 pcs./reel 1.2 ± 0.1 1.2 ± 0.1 1.2 ± 0.1 1500 1500 1500 5000 5000 5000 1.2 ± 0.1 1.2 ± 0.1 1500 1500 5000 5000 Case size 1812, 50 VDC 100. nF 220. nF 470. nF B37953J5104K0** B37953J5224K0** B37953J5474K0** Case size 2220, 50 VDC 470. nF 1.0 μF B37956J5474K0** B37956J5105K0** 1) Other capacitance values on request. 2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 3. Please read Cautions and warnings and Important notes at the end of this document. 16 12/05 Multilayer ceramic capacitors X7R X7R Typical characteristics Capacitance change ΔC/C25 versus temperature T 20 Capacitance change ΔC/C0 versus superimposed DC voltage V KKE0186-U ΔC % C 25 0 _ 10 _ 20 _ 30 _ 40 _ 50 _ 60 _ 70 _ 80 _ 60 _ 40 _ 20 0 20 40 60 80 100 ˚C 140 T Impedance |Z| versus frequency f Dissipation factor tan δ versus temperature T 10 _1 KKE0189-J tan δ 10 _2 _ 10 _3 _ _ 60 40 20 0 20 40 60 80 100 ˚C 140 T Please read Cautions and warnings and Important notes at the end of this document. 17 12/05 Multilayer ceramic capacitors X7R X7R Typical characteristics Capacitance change ΔC/C1 versus time t Insulation resistance Rins versus temperature T KKE0190-M 10 8 MΩ KKE0191-V 10 ΔC % C1 0 R ins 10 6 _5 10 5 _ 10 10 4 _ 15 10 3 10 2 0 20 40 60 80 100 _ 20 10 0 ˚C 140 T 10 1 10 2 h t 10 3 Further information Please see General Technical Information at www.epcos.com/ceramic_capacitors or the data book “Multilayer Ceramic Capacitors” for further information on: ■ ■ ■ ■ Soldering directions Taping and packing Surface mounting instructions Effects of mechanical stress Cautions and warnings ■ Derating: A “state of the art” application design is essential to achieve failures rates at ppb level. ■ ■ ■ ■ ■ Do not use designs based on 100% of specified rated values. AC applications may damage MLSC on a much lower level than DC voltage due to power dissipation losses. Mechanical stress - Please note EPCOS “General Technical Information”, “Surface mounting instructions” and information about the effect of mechanical stress. ESD - EPCOS recommends the use of varistors. Further processing - care must be taken using moulding processes. Combined stresses - the total stress (e.g. DC voltage, AC ripple, pulses and temperature) has to be taken into account to estimate reliability of MLSC. Please read Cautions and warnings and Important notes at the end of this document. 18 12/05 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 19 of 19