AZ726 MINIATURE POWER RELAY FEATURES • • • • • • • • AC coils Dielectric strength 5000 Vrms Low cost Flux tight package 16 Amp switching - single pole contacts Isolation spacing greater than 8mm Molded materials: all 94V-0 UL and Canadian file E43203 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Max. switched power: 480 W, 4000 VA Max. switched current: 16 A Max. switched voltage: 150 VDC/400 VAC Inductive load: (cosØ =0.4) Max. switched power: 240W or 2000 VA Max. Switched current: 8A Max. switched voltage: 125VDC or 400 VAC Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR 16 A 250 VAC, resistive Min. Load 5 VDC, .01A Material Silver alloy Resistance 30 milliohms initially (6V, 1A method) COIL Power At Pickup Voltage (typical) 576 mW Max. Continuous Dissipation 1.5 W at 20°C (68°F) ambient 1.2 W at 40°C (104°F) ambient Temperature Rise 36°C (65°F) at nominal coil voltage Temperature Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at rated load Operate Time (typical) 8 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C, 500 VDC 50% RH Dropout Greater than 30% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure PC (94V-0) Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Weight 17 grams Max. 105°C (221°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 1998-10-28 AZ726 RELAY ORDERING DATA COIL SPECIFICATIONS - AC Coil Nominal Coil VAC 6 Must Operate VAC 4.8 ORDER NUMBER Max. Continuous VAC 7.8 Nominal Current mA ±10% 150.0 Coil Resistance ±10% 16 Form A (SPST) AZ726-1A-6A Form C (SPDT) AZ726-1C-6A 12 9.6 15.6 75.0 65 AZ726-1A-12A AZ726-1C-12A 24 19.2 31.2 37.5 260 AZ726-1A-24A AZ726-1C-24A 50 40.0 65.0 18.0 1130 AZ726-1A-50A AZ726-1C-50A 110 88.0 143.0 10.6 4600 AZ726-1A-110A AZ726-1C-110A 220 176.0 286.0 5.3 20200 AZ726-1A-220A AZ726-1C-220A 230 184.0 299.0 3.6 24900 AZ726-1A-230A AZ726-1C-230A MECHANICAL DATA .023 (0.58) x .023 (0.58) 0.016 (0.4) x 0.040 (1.015) 035 Dia. (0.9) 2 places (4 places Form A (6 places Form C) Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 1998-10-28