Kingbright ACPSA04-41PBWA-A Surface mount display Datasheet

SURFACE MOUNT DISPLAY
PRELIMINARY SPEC
Part Number: ACPSA04-41PBWA/A
Blue
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
z 0.4 INCH CHARACTER HEIGHT.
The Blue source color devices are made with InGaN on SiC
z LOW CURRENT OPERATION.
Light Emitting Diode.
z HIGH CONTRAST AND LIGHT OUTPUT.
Static electricity and surge damage the LEDS.
z CATEGORIZED FOR LUMINOUS INTENSITY.
It is recommended to use a wrist band or anti-electrostatic
z MECHANICALLY RUGGED.
glove when handling the LEDs.
z GRAY FACE,WHITE SEGMENT.
All devices, equipment and machinery must be electrically
z PACKAGE : 400PCS / REEL.
grounded.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Package Dimensions& Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAG4988
REV NO: V.3
DATE: AUG/31/2007
PAGE: 1 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: S.J.Liu
ERP: 1361000046
Selection Guide
Part No.
Dice
ACPSA04-41PBWA/A
Iv (ucd) [1]
@ 10mA
Lens Type
Blue (InGaN)
WHITE DIFFUSED
Min.
Typ.
800
2900
Description
Common Anode, Rt.
Hand Decimal.
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
468
nm
IF=20mA
Blue
470
nm
IF=20mA
Spectral Line Half-width
Blue
21
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
3.2
4.0
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
120
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG4988
REV NO: V.3
DATE: AUG/31/2007
PAGE: 2 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: S.J.Liu
ERP: 1361000046
Blue
ACPSA04-41PBWA/A
SPEC NO: DSAG4988
REV NO: V.3
DATE: AUG/31/2007
PAGE: 3 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: S.J.Liu
ERP: 1361000046
ACPSA04-41PBWA/A
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG4988
REV NO: V.3
DATE: AUG/31/2007
PAGE: 4 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: S.J.Liu
ERP: 1361000046
PACKING & LABEL SPECIFICATIONS
ACPSA04-41PBWA/A
SPEC NO: DSAG4988
REV NO: V.3
DATE: AUG/31/2007
PAGE: 5 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: S.J.Liu
ERP: 1361000046
Similar pages