Installation Accessories Series/Type: B84298M Date: January 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. Installation accessories B84298M RF-tight screw plugs for sealing holes for connector fittings Dimensional drawing Installation instruction Ordering code Nominal width 25 mm, for connector fitting type B84298A0042L... B84298M0029C001 Nominal width 40 mm, for connector fitting typeB84298A0044L... B84298M0042C001 RF-tight cover flange plate Nominal width 80 mm, for connector fitting type B84298A0046L... B84298M0080C001 2 Installation accessories B84298M Dummy panel for fixing holes Ordering code: B84298M0012C001 for communication line filters B84312C*H… The dummy panel will be delivered with all parts needed to close an opening for communication line filters with 10 pairs (B84312CH...) RF-tight up to 40 GHz. Dimensional drawing 3 Installation accessories B84298M Adapter flange for fixing holes Ordering code: B84298M0012C002 for communication line filters B84312C*H… (10 pairs/20 lines). The adapter flange enables installation of up to four 2-line filters (B84312C*B...) or 4-line filters (B84312C*E...) RF-tight up to 40 GHz. It comes with all parts needed. With the adapter flange you get 3 screw plugs for RF-tight sealing of unused holes. Dimensional drawing 4 Installation accessories B84298M Bracket adapter for communication line filters with 10 pairs Ordering code: B84298M0012C004 The bracket adapter allows flat installation of a communiction line filters with 10 pairs (B84312C*H…) on the shielding wall. Dimensional drawing Installation section 5