Marketing Bulletin DATE: August 25, 2005 TO: All Sales Personnel FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective August 25th, 2005: Series E11W2 E13W2 Description 5V 6 pad SMD LVPECL Oscillator 3.3V 6 pad SMD LVPECL Oscillator Recommended Replacement E13C7 E13C7 In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after November 25th, 2005, with delivery to conclude by February 25th 2006. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation. Best Regards, Mark W. Stoner Director of Marketing Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 E11W2 Series E11W2 • PECL Output Oscillators • 5.0V supply voltage • 6 pad PCB SMD package • Stability to 20ppm • Output Enable/Disable available • Complementary Output available • Available on Tape and Reel H 5.5 L 14.8 W 9.8 OSCILLATOR NOTES OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 19.440MHz to 250.000MHz Operating Temperature Range 0°C to 70°C Available at Frequencies < 212.500MHz -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VCC) 5.0VDC ±5% Input Current 100mA Maximum Logic Type 100KH Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance ±100ppm, ±50ppm, ±25ppm, or at 25°C, Frequency Stability over the Operating ±20ppm Maximum Temperature Range, Supply Voltage Change, Output Load Change, Aging, Shock, and Vibration Output Voltage Logic High (VOH) VCC-1.025VDC Minimum Output Voltage Logic Low (VOL) VCC-1.620VDC Maximum Rise Time / Fall Time 20% to 80% of waveform 2 nSeconds Maximum Duty Cycle at 50% of waveform 50 ±10(%) 50 ±5(%) Load Drive Capability 50 Ohms into VCC-2.0VDC Logic Control / Additional Output No Connect, Enable/Disable, Complementary Output, or Complementary Output and Enable/Disable Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum Enables Output No Connection Enables Output VIH of VCC-1.165VDC Minimum Disables Output: Logic Low Disables Complementary Output: Logic High Start Up Time 10 mSeconds Maximum RMS Phase Jitter FJ = 12kHz to 20MHz MANUFACTURER CATEGORY ECLIPTEK CORP. OSCILLATOR SERIES E11W2 800-ECLIPTEK www.ecliptek.com for latest revision 1 pSec Maximum PACKAGE VOLTAGE CLASS REV.DATE 6-PCB 5.0V OS78 01/03 170 Specifications subject to change without notice. PART NUMBERING GUIDE E11W2 F 2 C - 155.520M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=±100ppm Maximum over 0°C to +70°C D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C F=±20ppm Maximum over 0°C to +70°C G=±100ppm Maximum over -40°C to +85°C H=±50ppm Maximum over -40°C to +85°C AVAILABLE OPTIONS Blank=Tubes TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect B=Enable/Disable C=Complementary Output D=Complementary Output and Enable/Disable DUTY CYCLE 1=50% ±10%, 2=50% ±5% MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Complementary Output or No Connect Pin 4: Output Pin 2: Enable/Disable or No Connect Pin 5: No Connect Pin 3: Case Ground Pin 6: Supply Voltage Tolerances = ±0.1 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE F 12 ±.1 A B C D E 24 ±.3 11.5 ±.1 10.75 ±.1 4 ±.2 2±.1 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1000 REEL G H J K L R S T U V B0* 1.5 +.1-0 A0* .4 ±.05 K0* 2.5 MIN 10 MIN 30.4 MAX 360 MAX 24.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Line 1: ECLIPTEK Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 OBSOLETE Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR E11W2 6-PCB 5.0V OS78 800-ECLIPTEK www.ecliptek.com for latest revision 171 REV.DATE 01/03 Specifications subject to change without notice. E13W2 Series E13W2 • PECL Output Oscillators • 3.3V supply voltage • 6 pin PCB SMD package • Stability to 20ppm • Output Enable/Disable available • Complementary Output available • Available on Tape and Reel H 5.5 L 14.8 W 9.8 OSCILLATOR NOTES OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 19.440MHz to 250.000MHz Operating Temperature Range 0°C to 70°C Available at Frequencies < 212.500MHz -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VCC) 3.3VDC ±5% Input Current 75mA Maximum Logic Type 100KH Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance ±100ppm, ±50ppm, ±25ppm, or at 25°C, Frequency Stability over the Operating ±20ppm Maximum Temperature Range, Supply Voltage Change, Output Load Change, Aging, Shock, and Vibration Output Voltage Logic High (VOH) VCC-1.025VDC Minimum Output Voltage Logic Low (VOL) VCC-1.620VDC Maximum Rise Time / Fall Time 20% to 80% of waveform 2 nSeconds Maximum Duty Cycle at 50% of waveform 50 ±10(%) 50 ±5(%) Load Drive Capability 50 Ohms into VCC-2.0VDC Logic Control / Additional Output No Connect, Enable/Disable, Complementary Output, or Complementary Output and Enable/Disable Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum Enables Output No Connection Enables Output VIH of VCC-1.165VDC Minimum Disables Output: Logic Low Disables Complementary Output: Logic High Start Up Time 10 mSeconds Maximum FJ = 12kHz to 20MHz RMS Phase Jitter MANUFACTURER CATEGORY ECLIPTEK CORP. OSCILLATOR SERIES E13W2 800-ECLIPTEK www.ecliptek.com for latest revision 1 pSec Maximum PACKAGE VOLTAGE CLASS REV.DATE 6-PCB 3.3V OS76 03/02 174 Specifications subject to change without notice. PART NUMBERING GUIDE E13W2 F 2 C - 155.520M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=±100ppm Maximum over 0°C to +70°C D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C F=±20ppm Maximum over 0°C to +70°C G=±100ppm Maximum over -40°C to +85°C H=±50ppm Maximum over -40°C to +85°C AVAILABLE OPTIONS Blank=Tubes TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect B=Enable/Disable C=Complementary Output D=Complementary Output and Enable/Disable DUTY CYCLE 1=50% ±10%, 2=50% ±5% MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Complementary Output or No Connect Pin 4: Output Pin 2: Enable/Disable or No Connect Pin 5: No Connect Pin 3: Case Ground Pin 6: Supply Voltage Tolerances = ±0.1 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE F 12 ±.1 A B C D E 24 ±.3 11.5 ±.1 10.75 ±.1 4 ±.2 2±.1 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1000 REEL G H J K L R S T U V B0* 1.5 +.1-0 A0* .4 ±.05 K0* 2.5 MIN 10 MIN 30.4 MAX 360 MAX 24.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Line 1: ECLIPTEK Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 OBSOLETE Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR E13W2 6-PCB 3.3V OS76 800-ECLIPTEK www.ecliptek.com for latest revision 175 REV.DATE 01/03 Specifications subject to change without notice.