Vishay F1722-410-4 Ac-capacitors, suppression capacitors class x1 ac 440 v (mkt) Datasheet

F1722-4000
Vishay Roederstein
AC-Capacitors, Suppression Capacitors
Class X1 AC 440 V (MKT)
FEATURES:
Dimensions in mm
Product is completely lead (Pb)-free
Product is RoHS compliant
L
Pb-free
W
CAPACITANCE TOLERANCE:
e3
Standard: ± 10 %
H
DISSIPATION FACTOR TANδ:
RoHS
COMPLIANT
< 1 % measured at 1 kHz
± 0.4
pcm ± 0.4
X
INSULATION RESISTANCE: FOR C ≤ 0.33 µF:
30 GΩ average value
15 GΩ minimum value
Ø 0.8
TIME CONSTANT FOR C > 0.33 µF:
LEAD LENGTH
X (mm)
ORDERING CODE**
4-1
6-1
15-1
30+5
F1722-. . .-4004
F1722-. . .-4000
F1722-. . .-4015
F1722-. . .-4030
Electrode
Free margin
Dielectric
10000 sec. average value
5000 sec. minimum value
TEST VOLTAGE:
(Electrode/electrode): DC 2150 V/2 sec.
REFERENCE STANDARDS:
EN 132 400, 1994
EN 60068-1
IEC 60384-14/2, 1993
UL 1283, UL 1414
CSA 22.2 No. 8-M 86
CSA 22.2 No. 1-M 90
Center margin
DIELECTRIC:
MAXIMUM PULSE RISE TIME: (du/dt) in V/µs
Polyester film
ELECTRODES:
RATED
VOLTAGE
PITCH (mm)
15.0
22.5
27.5
37.5
AC 440 V
200
150
100
100
Metal evaporated
CONSTRUCTION:
Metallized film capacitor
Internal series connection
RATED VOLTAGE:
AC 440 V, 50/60 Hz
Between interconnected terminations and case (foil method):
AC 2500 V for 2 sec. at 25 °C.
PERMISSIBLE DC VOLTAGE:
Z [Ω]
DC 1000 V
TERMINALS:
10
1
Radial tinned copper wire
0
10
-2
CAPACITANCE RANGE:
E12 series 0.01 µFX1 - 0.47 µFX2
preferred values acc. to E6
10
0.022 μF
0.1 μF
0.015 μF
0.01 μF
0.033 μF
0.068 μF
2.2 μF
1.5 μF
1 μF
0.68 μF
40/100/56
0.33 μF
0.47 μF
10
0.15 μF
-1
CLIMATIC TESTING CLASS ACC. TO EN 60068-1:
0.22 μF
Plastic case, epoxy resin sealed, flame retardant UL 94V-0
0.047 μF
COATING:
-3
10
0.01
0.05 0.1
0.5 1.0
FURTHER TECHNICAL DATA:
5.0 10
f
50 100
[MHz]
See page 59 (Document No 26516)
Impedance (Z) as a function of frequency (f) at Ta = 20 °C (average).
Measurement with lead length 6 mm.
Document Number: 26518
Revision: 09-Feb-06
To contact us: [email protected]
www.vishay.com
25
F1722-4000
Vishay Roederstein
AC-Capacitors, Suppression Capacitors
Class X1 AC 440 V (MKT)
APPROVALS
COUNTRY
SPECIFICATION
ELECTRICAL VALUES
APPROVAL REFERENCE
U.S.A.
(for AC 250 V)
UL 1283
UL 1414
0.01 - 0.47 µFX
0.01 - 0.47 µFX
Pending
E 100682
Canada
(for AC 250 V)
C 22.2 No. 8-M 1986
C 22.2 No. 1-M 1994
0.01 - 0.47 µFX
0.01 - 0.47 µFX
Pending
Pending
0.01 - 0.47 µFX1
DE 1-8221
0.01 - 0.47 µFX1
40005095
CB TEST-CERTIFICATE (for AC 440 V)
EN 132 400; 1999
IEC 60384-14, 2nd edition; 1995
Germany
APPROVAL MARK
10
This approval mark together with the CB-Certificate replace all national approval marks of the following countries
(they have already signed the CB-Agreement):
Austria
Belgium
Denmark
Finland
Sweden
France
Germany
Ireland
Italy
Switzerland
Netherlands
Japan
Singapore
CAPACITANCE
TOL.
(%)
Israel
Portugal
Spain
Great Britain
Norway
China
Poland
Czech. Republic
Rep. of Korea
Hungary
Iceland
Slovenia
PITCH
(mm)
BOX
NO.
DIMENSIONS
W x H x L (mm)
(+ 0.2/- 0.4 mm)
WEIGHT
(g)
QUANTITY
PACKAGE
(pcs)**
0.01 µFX1
± 10
15.0
06
6.3 x 12.3 x 17.8
2.0
500
0.012 µFX1
± 10
15.0
06
6.3 x 12.3 x 17.8
2.0
500
0.015 µFX1
± 10
15.0
07
7.3 x 13.3 x 17.8
2.4
450
0.018 µFX1
± 10
15.0
07
7.3 x 13.3 x 17.8
2.4
450
0.022 µFX1
± 10
15.0
08
8.3 x 14.3 x 17.8
2.7
325
0.027 µFX1
± 10
15.0
08
8.3 x 14.3 x 17.8
2.7
325
0.033 µFX1
± 10
15.0
28
8.3 x 17.3 x 17.8
2.7
325
0.039 µFX1
± 10
22.5*
09
6.3 x 14.3 x 26.3
3.3
260
0.047 µFX1
± 10
22.5*
11
7.3 x 15.3 x 26.3
4.1
235
0.056 µFX1
± 10
22.5*
12
8.3 x 16.3 x 26.3
4.6
200
0.068 µFX1
± 10
22.5*
12
8.3 x 16.3 x 26.3
4.6
200
0.082 µFX1
± 10
22.5*
12
8.3 x 16.3 x 26.3
4.6
200
0.1 µFX1
± 10
22.5*
13
10.3 x 18.3 x 26.3
6.7
170
0.12 µFX1
± 10
22.5*
13
10.3 x 18.3 x 26.3
6.7
170
0.15 µFX1
± 10
27.5*
14
11.0 x 20.3 x 31.3
9.1
125
0.18 µFX1
± 10
27.5*
14
11.0 x 20.3 x 31.3
9.1
125
0.22 µFX1
± 10
27.5*
15
13.0 x 23.3 x 31.3
12.9
110
0.27 µFX1
± 10
27.5*
15
13.0 x 23.3 x 31.3
12.9
110
0.33 µFX1
± 10
27.5*
18
14.5 x 24.3 x 31.3
15.0
100
0.39 µFX1
± 10
37.5*
14
12.0 x 22.3 x 41.3
15.2
90
0.47 µFX1
± 10
37.5*
16
14.0 x 24.3 x 41.3
18.9
80
Preferred values in bold print.
Inbuilt discharging resistor on request (with larger case dimensions).
* Different pitch on request.
** Further information about packaging quantities with different lead length and/or taped versions.
See page 16 (Document No 27608 Packing Quantities). Use Box No. as reference
*** These capacitors can be delivered on continuous tape and reel - see page 14/15 (Document No. 27622).
The ordering code is F1722-. . .-4900 at H = 16.5 mm, F1722-. . .-4901 at H = 18.5 mm.
www.vishay.com
26
ORDERING CODE***
F1722-310-4 . . .
F1722-312-4 . . .
F1722-315-4 . . .
F1722-318-4 . . .
F1722-322-4 . . .
F1722-327-4 . . .
F1722-333-4 . . .
F1722-339-4 . . .
F1722-347-4 . . .
F1722-356-4 . . .
F1722-368-4 . . .
F1722-382-4 . . .
F1722-410-4 . . .
F1722-412-4 . . .
F1722-415-4 . . .
F1722-418-4 . . .
F1722-422-4 . . .
F1722-427-4 . . .
F1722-433-4 . . .
F1722-439-4 . . .
F1722-447-4 . . .
Document Number: 26518
Revision: 09-Feb-06
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages