ITT DA12J2GS2AQF Miniature single pole rocker switch Datasheet

C&K DA Series
Miniature Single Pole Rocker Switches
Features/Benefits
Typical Applications
• Nice actuator styling with
• Small appliances
multiple options
• Computers and peripherals
• Guards to prevent accidental
• Medical instrumentation
actuation
• Momentary and maintained functions
• IP65 splash proof rubber boot option
Specifications
Materials
CONTACT RATING:
UL/CSA: 16 AMPS @ 125 VAC, 1/3 HP;
10 AMPS @ 250 VAC, 1/2 HP.
VDE: 10 AMPS @ 125 VAC, 6 AMPS @ 250 VAC.
ELECTRICAL LIFE: 10,000 make and break cycles at full load.
INSULATION RESISTANCE: 108 Ω min.
DIELECTRIC STRENGTH: 1,500 VRMS @ sea level.
HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish.
ILLUMINATED ACTUATOR: Polycarbonate, matte finish.
CENTER CONTACTS: Silver plated, copper alloy.
END CONTACTS: Silver plated AgSn02ln03.
ALL TERMINALS: Silver plated, copper alloy.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages 4 thru 6. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
DA101 SPDT On-None-On
DA102 SPST On-None-Off
DA103 SPDT On-Off-On
DA12 * SPST On-None-Off
Actuator
J1 Rocker
J2 Two-tone rocker
J3 Illuminated rocker
J4 Circle, illuminated rocker
J5 Oval, illuminated rocker
Actuator Color
2 (STD). Black
1 White
3 Red
R Red, illuminated
A Amber, illuminated
G Green, illuminated
Mounting Style/Color
S2 (STD.) Snap-in, black
S1 Snap-in, white
B2 Recessed snap-in bracket, black
G2 Guard, black
Termination
15 (STD.) .187” quick connect
17 Solder lug
02 Thru-hole
A Right angle Actuator Marking
(NONE) (STD.) No marking
D ON-OFF
H ”O l” - international ON-OFF
N Large dot
P ”O -” international ON-OFF
Contact Rating
QF (STD.) Silver
*
DA12 - for switches with both marking and illumination
Lamp Rating
(NONE) (STD.) No lamp
6 LED
7 125 VAC neon
8 250 VAC neon
Dimensions are shown: Inch (mm)
Dimensions subject to change
3
www.ittcannon.com
C&K DA Series
Miniature Single Pole Rocker Switches
SWITCH FUNCTION
CONNECTED TERMINALS
SWITCH FUNCTION
NO.
POLES
SP
C&K marking on opposite side
C&K marking on opposite side
MODEL NO.
DA101
ON
NONE
ON
DA102
ON
NONE
OFF
DA103
ON
OFF
ON
2-3
N/A
SCHEMATIC
OR
2-1
For 7 & 8
Illuminated Versions
Only
+
–
For 6 Illuminated
Versions Only
DA12 *
*
ON
NONE
OFF
DA12 - for switches with both marking and illumination
ACTUATOR
J1
J3
J2
ROCKER
TWO-TONE ROCKER
ILLUMINATED ROCKER
.142
(3,6)
.389
(9,88)
NOTE: Available with DA102 switch function and P actuator marking only.
NOTE: J3 actuator available with DAX02 switch functions only.
Dimensions are shown: Inch (mm)
Dimensions subject to change
4
www.ittcannon.com
C&K DA Series
Miniature Single Pole Rocker Switches
ACTUATOR
J4
J5
CIRCLE, ILLUMINATED ROCKER
OVAL, ILLUMINATED ROCKER
.389
(9,88)
.142
(3,6)
.389
(9,88)
.142
(3,6)
NOTE: Available with DA102 switch function and
7 & 8 lamp ratings only.
NOTE: Available with DA102 switch function and
6 lamp rating only.
ACTUATOR COLOR
OPTION
CODE
2
1
3
R
A
G
ACTUATOR
COLOR
OPTION
CODE
ACTUATOR
COLOR
BOTTOM
TOP
(STD.) BLACK
WHITE
RED
RED, ILLUMINATED
AMBER, ILLUMINATED
GREEN, ILLUMINATED
1
WHITE
RED
2
3
4
5
WHITE
BLACK
RED
WHITE
BLACK
WHTE
BLACK
RED
J2 actuator only
MOUNTING STYLE/COLOR
S2
S1
B2
(STD.) SNAP-IN, BLACK
SNAP-IN, WHITE
RECESSED SNAP-IN BRACKET, BLACK
.080
(2,03)
1.200
(30,48)
.820
(20,83)
1.244
(31,60)
NOTE: Available with DA10X switch functions only.
S2, S1 & G2 PANEL MOUNTING
G2
GUARD, BLACK
.350
(8,89)
.940
(23,88)
.700
(17,78)
PANEL THICKNESS
0.030-0.049 (0,75-1,25)
0.049-0.079 (1,25-2,0)
0.079-0.118 (2,0-3,0)
1.064
(27,03)
“X”
0.756-.004 (19,2-0,1)
0.764-.004 (19,4-0,1)
0.779-.004 (19,8-0,1)
“Y”
0.512+.004 (13,0+0,1)
0.512+.004 (13,0+0,1)
0.512+.004 (13,0+0,1)
B2 PANEL MOUNTING
PANEL THICKNESS
0.030-0.049 (0,75-0,25)
0.049-0.079 (1,25-2,0)
0.079-0.118 (2,0-3,0)
NOTE: Available with DA10X switch functions only.
“Y”
1.068 (27,13)
1.076 (27,33)
1.092 (27,74)
Dimensions are shown: Inch (mm)
Dimensions subject to change
5
www.ittcannon.com
C&K DA Series
Miniature Single Pole Rocker Switches
TERMINATION
15
17
(STD.) .187” QUICK CONNECT
SOLDER LUG
.669
(17,0)
02
A
THRU-HOLE
.110
(2,8)
.268
(6,8)
RIGHT ANGLE
.543
(13,8)
.543
(13,8)
1.075
(27,3)
1
1
2
.051
(1,3)
.031
(0,8)
.051
(1,3)
.138
(3,5)
.280
(7,1)
.512
(13,0)
.630
(16,0)
2
3
.031
(0,8)
.280
(7,1)
.059
(1,5)
.098 DIA.
(ø2,5)
.031
(0,8)
.024
(0,6)
ACTUATOR MARKING
NONE
(STD.) NO MARKING
D
ON-OFF
H
Ol
N
LARGE DOT
P O-
NOTE: Orientation of actuator marking and terminals.
CONTACT MATERIAL
OPTION
CODE
CONTACT AND TERMINAL MATERIAL
QF (STD.)
SILVER
RATINGS
POWER
16 AMPS @ 125 VAC; 1/3 HP; 10 AMPS @ 250 VAC; 1/2 HP,
(UL/CSA). 10 AMPS @ 125 VAC, 6 AMPS @ 250 VAC (VDE)
LAMP RATING
(NONE) (STD.) NO LAMP
6 LED RATING @ 10 mA Vf=1.85V
7
8
125 VAC 33kΩ NEON
250 VAC 150kΩ NEON
Dimensions are shown: Inch (mm)
Dimensions subject to change
6
www.ittcannon.com
C&K DA Series
Miniature Single Pole Rocker Switches
ACCESSORIES
216C00000
IP65 SPLASH PROOF RUBBER BOOT
.748
(19,0)
.551
(14,0)
.787
(20,0)
.142
(3,6)
.957
(24,3)
.295
(7,5)
Dimensions are shown: Inch (mm)
Dimensions subject to change
7
www.ittcannon.com
Similar pages