Ironwood CBT-LGA-5007 Low and stable contact resistance for reliable production yield Datasheet

Clamshell Spring Pin Socket - Direct mount, solderless
Features
32.60
• Wide temperature range (-55C to +180C).
• High current capability (up to 1.8A).
• Excellent signal integrity at high frequencies.
• Low and stable contact resistance for reliable production yield.
• Highly compliant to accommodate wide IC package co-planarity variations.
• Clamshell lid
23.0
Recommended Torque = 1.5-2 in-lbs
17.2250
39.225
DETAIL A
SCALE 8 : 1
47.94
38.39
17.90
19.61
15.39
A
3.79
2.74
5.97
5.00
30.78
2.80
48.49
Description: CBT-LGA 11.5x13mm 0.5mm BGA162 without solder ball
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CBT-LGA-5007 Drawing
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 65.44
STATUS: Released
SHEET: 1 OF 4
REV. A
ENG: S. Huang
DRAWN BY: M. Raske
SCALE: 1.4:1
FILE: CBT-LGA-5007 Dwg
DATE: 01/30/2014
2.25
1.250±0.125 (x4)
Orientation Mark
1.250±0.125 (x4)
39.225±0.125
Socket lid size
2.540
37.225±0.125
Socket base size
17.225
9.50
4.7500
18.225±0.125
No component area
0.85±0.05 (x2)
Non plated alignment hole
5.08
0.30 pad (x162)
1.71±0.10 (x4)
Non plated mounting hole
11.00
4.50
4.80
4.80
15.725±0.050 (x4)
18.225±0.125
Socket base size
19.725±0.125 (x4)
Backing plate size
32.600±0.125 Socket lid size
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
Max Ht: 15.55 mm
Max Ht: 3.95 mm
Max Ht: 2.90 mm
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CBT-LGA-5007 Drawing
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 65.44
STATUS: Released
SHEET: 2 OF 4
REV. A
ENG: S. Huang
DRAWN BY: M. Raske
SCALE: 2.5:1
FILE: CBT-LGA-5007 Dwg
DATE: 01/30/2014
B
D
Ironwood package code: BGA162B (equivalent)
0.1
Pin A1
NOTE: The socket is only for BGA without solder balls.
A
DIM
A
A1
A2
D
E
b
e
E
MIN
NOM
0.17
0.61
11.43
12.93
0.25
0.22
0.66
11.50
13.00
0.30
0.5 BSC
MAX
1.00
0.27
0.71
11.57
13.07
0.35
Arrary: 10x20
0.1
TOP VIEW
BGA without solder balls
A2
0.1 C
SIDE VIEW
A
0.08 C
A1
C
Original BGA package
SIDE VIEW
e
b
0.15 M C A B
0.05 M C
BOTTOM VIEW
Pin A1
Description: Compatible package
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CBT-LGA-5007 Drawing
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 65.44
STATUS: Released
SHEET: 3 OF 4
REV. A
ENG: S. Huang
DRAWN BY: M. Raske
SCALE: 4.5:1
FILE: CBT-LGA-5007 Dwg
DATE: 01/30/2014
ITEM
NO.
1
4
15
18
19
DESCRIPTION
Material
CBT Socket Base 13mm
7075-T6 Aluminum Alloy
2
Clam shell lid for 17mm IC
7075-T6 Aluminum Alloy
3
Compression Plate 11.5x13mm
7075-T6 Alumium Alloy
4
M10 Comression Screw
7075-T6 Aluminum Alloy
5
IC Guide 11.5x13mm
Kapton Polyimide/Cirlex
6
Top pin guide 11.5x13mm 0.5mm pitch 10x20 array
Semitron MDS 100
7
Bottom Pin Guide 11.5x13mm 0.5mm pitch 10x20 array
Semitron MDS 100
8
13x13mm Clamshell Backing Plate
IC,BGA162 0.5mm pitch 111.5x13mm 10x20 array without
solder ball
PCB 11.5x13mm 0.5mm pitch 10x20 array
7075-T6 Aluminum Alloy
9
10
2
17
3
9
16
High Temp FR4
High Temp FR4
11
Stamped Pin, 0.4mm SBT-LGA/QFN
N/A
12
#0-80 X .188" LG FL HD, Slotted, Polypropylene
PP Homopolymer
13
#0-80 x 0.5, SH Cap Screw
18-8 Stainless Steel
14
Dowel pin, 1/32" X 1/4", SS
Stainless Steel (18-8)
15
Screw, M3 x 12mm, Low Head Cap, SS
18-8 Stainless Steel
16
Clamshell Latch
7075-T6 Aluminum Alloy
17
Hinge Pin and Snap Ring, 3mm OD, 25mm long, SS
Stainless Steel (ferritic)
18
Steel Music Wire
19
Spring Clamshell lid assembly
Precision Compression Spring, Zinc-Plated Music Wire,
1/2" Length, .12" OD, .016" Wire
Zinc Plated Music Wire
20
Insulating washer, 4mm OD.
Kapton Polyimide/Cirlex
5
1
6
TOP VIEW
14
11
7
10
12
R2.00 (x4)
20
13
1.70±0.10
8
4.00 (x5)
SIDE VIEW
15.725±0.10 (x4)
5.00
Description: Skt comp
3.142
SBT PIN
scale 16:1
2.50
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CBT-LGA-5007 Drawing
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 65.44
STATUS: Released
SHEET: 4 OF 4
REV. A
ENG: S. Huang
DRAWN BY: M. Raske
SCALE: 1.8:1
FILE: CBT-LGA-5007 Dwg
DATE: 01/30/2014
Similar pages