P-DUKE FED30-48S12W 30 watts dc-dc converter Datasheet

FED30W SERIES
30 WATTS
DC-DC CONVERTER
FEATURES
• 30 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 8.5A
• STANDARD 2.00 X 1.00 X 0.40 INCH
• HIGH EFFICIENCY UP TO 91%
• 4:1 ULTRA WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
OPTIONS
NEGATIVE LOGIC REMOTE ON/OFF
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement
Semiconductor Equipment
DESCRIPTION
The FED30W series offer 30 watts of output power from a 2 x 1 x 0.4 inch
package. FED30W series have 4:1 ultra wide input voltage of 9~36 and
18~75VDC. The FED30W have features 1600VDC of isolation, short circuit
protection, over-current protection, over-voltage protection,
over-temperature protection and six sided shielding.
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output power
30 Watts max.
Voltage accuracy
±1%
Voltage adjustability
Single output
± 10%
Minimum load
0%
Line regulation
LL to HL at Full Load
± 0.2%
Single
± 0.5%
Load regulation
No load to Full load
± 1%
Dual
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
1.5-5.1Vo 100mVp-p
20MHz bandwidth
Ripple and noise
(Measured with a 1uF/50V MLCC) 12-15Vo
150mVp-p
±0.02% / ºC, max.
Temperature coefficient
Transient response recovery time
25% load step change
1.5V
Output
2.5V
Output
Over voltage protection 3.3V
Output
5.0V & 5.1V & ±5V
Zener diode clamp
Output
12V & ±12V
Output
Output
15V & ±15V
Over load protection
% of FL at nominal input
Short circuit protection
250µs
2.0V
3.3V
3.9V
6.2V
15V
18V
150%
Continuous, automatics recovery
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Case grounding
See table
Input to Output
1600VDC min. 1minute
Input (Output) to Case
1600VDC min. 1minute
Connect case to -input with decoupling Y Cap
Isolation resistance
109ohms, min.
500VDC
Isolation capacitance
1500pF, max.
Switching frequency
430kHz± 10%
Safety approvals
IEC60950-1, UL60950-1, & EN60950-1
Case material
Nickel-coated copper
Base material
FR4 PCB
Potting material
Epoxy (UL94 V-0)
2.00 X 1.00 X 0.40 Inch
(50.8X 25.4 X 10.2 mm)
30.5g(1.07oz)
Dimensions
Weight
MTBF (Note 1)
Page 1 of 3
MIL-HDBK-217F
1.288 x 106 hrs.
Input voltage range
24VDC nominal input
48VDC nominal input
9 ~ 36VDC
18 ~ 75VDC
Pi type
50VDC 100ms, max.
100VDC 100ms, max.
20mAp-p
Power up
30ms
Remote ON/OFF
30ms
9VDC, max.
18VDC, max.
8VDC
16VDC
Input filter
Input surge voltage
24VDC input
48VDC input
Input reflected ripple current
Nominal input and
Start up time
constant resistive load
24VDC input
Start-up voltage
48VDC input
24VDC input
Shutdown voltage
48VDC input
Remote ON/OFF (Note 5)
(Positive logic)(Standard) DC-DC ON
Open or 3V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
(Negative logic)(Option)
DC-DC ON
Short or 0V < Vr < 1.2V
DC-DC OFF
Open or 3V < Vr < 12V
Input current of Remote control pin
Nominal Input -0.5mA ~ +0.5mA
Remote off state input current
Nominal Input
3mA
ENVIRONMENTAL SPECIFICATIONS
-40ºC to +50ºC (without derating)
+50ºC to +85ºC (with derating)
Maximum case temperature
105ºC
Storage temperature range
-55ºC to +125ºC
Over temperature protection
115ºC
Thermal impedance
Nature convection
12ºC/Watt
(Note 6)
Nature convection with heat-sink
10ºC/Watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
Operating ambient temperature
EMC CHARACTERISTICS
EMI (Note 7)
EN55022
ESD
EN61000-4-2
Radiated immunity
Air
Contact
Class A
± 8kV
Perf. Criteria A
± 6kV
EN61000-4-3
10 V/m Perf. Criteria A
Fast transient (Note 8) EN61000-4-4
± 2kV Perf. Criteria A
Surge (Note 8)
EN61000-4-5
± 1kV Perf. Criteria A
Conducted immunity
EN61000-4-6
10 Vr.m.s Perf. Criteria A
www.pduke.com
2014/4/30
FED30W SERIES
30 WATTS
Model
Number
Input
Range
Output
Voltage
FED30-24S1P5W
FED30-24S2P5W
FED30-24S3P3W
FED30-24S05W
FED30-24S5P1W
FED30-24S12W
FED30-24S15W
FED30-24D05W
FED30-24D12W
FED30-24D15W
FED30-48S1P5W
FED30-48S2P5W
FED30-48S3P3W
FED30-48S05W
FED30-48S5P1W
FED30-48S12W
FED30-48S15W
FED30-48D05W
FED30-48D12W
FED30-48D15W
9 ~ 36 VDC
9 ~ 36 VDC
9 ~ 36 VDC
9 ~ 36 VDC
9 ~ 36 VDC
9 ~ 36 VDC
9 ~ 36 VDC
9 ~ 36 VDC
9 ~ 36 VDC
9 ~ 36 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
18 ~ 75 VDC
1.5 VDC
2.5 VDC
3.3 VDC
5.0 VDC
5.1 VDC
12 VDC
15 VDC
±5VDC
±12VDC
±15VDC
1.5 VDC
2.5 VDC
3.3 VDC
5.0 VDC
5.1 VDC
12 VDC
15 VDC
±5VDC
±12VDC
±15VDC
DC-DC CONVERTER
(2)
Output (3)
Max. Load Ripple & Noise
Output Current
Min. Load
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
8500mA
8000mA
7500mA
6000mA
6000mA
2500mA
2000mA
±3000mA
±1250mA
±1000mA
8500mA
8000mA
7500mA
6000mA
6000mA
2500mA
2000mA
±3000mA
±1250mA
±1000mA
(3)
(4)
No load
Input Current
Eff
(%)
Capacitor
Load max.
70mA
70mA
70mA
105mA
105mA
20mA
30mA
90mA
25mA
25mA
30mA
45mA
45mA
65mA
65mA
60mA
50mA
50mA
15mA
15mA
80
83
86
88
88
89
89
88
87
87
80
84
86
88
88
90
91
88
88
88
20000µF
20000µF
20000µF
14400µF
14400µF
3000µF
2000µF
± 3000µF
± 2000µF
± 1300µF
20000µF
20000µF
20000µF
14400µF
14400µF
3000µF
2000µF
± 3000µF
± 2000µF
± 1300µF
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
150mVp-p
150mVp-p
100mVp-p
150mVp-p
150mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
150mVp-p
150mVp-p
100mVp-p
150mVp-p
150mVp-p
Note
1.
2.
3.
4.
5.
6.
7.
8.
MIL-HDBK-217F @Tc=70 ºC, Full load.
Typical value at nominal input voltage and no load.
Typical value at nominal input voltage and full load.
Test by minimum input and constant resistive load.
The CTRL pin voltage is referenced to -INPUT.
Heat-sink is optional and P/N: 7G-0020C-F.
The FED30W series standard module meets EN55022 Class A and Class B with external components.
For more detail information, please contact with P-DUKE.
An external filter capacitor is required if the module has to meet EN61000-4-4,EN61000-4-5.
The filter capacitor Power Mate suggest: 24 VDC INPUT : Nippon chemi-con KY series, 330µF/50V.
48 VDC INPUT : Nippon chemi-con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
FED30-48S05W Derating Curve with Heat-Sink
120
100
100
OUTPUT POWER (%)
OUTPUT POWER (%)
FED30-48S05W Derating Curve
120
80
60
40
20
0
80
60
40
20
0
55
-40
-20
0
20
40
60
80
AMBIENT TEMPERATURE(
℃)
100
-20
0
20
40
60
80
AMBIENT TEMPERATURE(
℃)
100
120
FED30-48S05W
Efficiency
VS
Load
FED30-48S05W
Efficiency
VSOutput
Output Load
FED30-48S05W
Efficiency
VS
FED30-48S05W
Efficiency VS
InputInput
Voltage voltage
95
64
-40
120
90
80
EFFICIENCY (%)
EFFICIENCY (%)
85
93
91
89
87
75
70
65
60
55
85
18
Page 2 of 3
24
30
36
42
48
54
INPUT VOLTAGE (V)
60
66
72
50
75
10
www.pduke.com
20
30
40
50
60
% of FULL LOAD
70
80
90
100
2014/4/30
FED30W SERIES
30 WATTS
DC-DC CONVERTER
MECHANICAL DRAWING
1. All dimensions in Inch (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.01(0.25)
3. Pin dimension tolerance ±0.004 (0.1)
EXTERNAL OUTPUT TRIMMING
PIN CONNECTION
Page 3 of 3
PIN
SINGLE
DUAL
1
+ INPUT
+ INPUT
2
- INPUT
- INPUT
3
CTRL
CTRL
4
+ OUTPUT
+ OUTPUT
5
- OUTPUT
COMMON
6
TRIM
- OUTPUT
Output can be externally trimmed by
using the method shown below.
TRIM UP
TRIM DOWN
6
6
RU
5
www.pduke.com
RD
4
2014/4/30
Similar pages