POSEICO SPA Via Pillea 42-44, 16153 Genova - ITALY Tel. + 39 010 8599400 - Fax + 39 010 8682006 Sales Office: Tel. + 39 010 8599400 - [email protected] AUS501 RECTIFIER DIODE Repetitive voltage up to Mean forward current Surge current 600 V 7890 A 16 kA FINAL SPECIFICATION Mar. 17 - Issue: 4 Symbol Characteristic Conditions Tj [°C] Value Unit BLOCKING V RRM Repetitive peak reverse voltage 190 600 V V RSM Non-repetitive peak reverse voltage 190 700 V I RRM Repetitive peak reverse current 190 50 mA V=VRRM CONDUCTING I F (AV) Mean forward current 180° sin, 50 Hz, Th=85°C, double side cooled 7890 A I F (AV) Mean forward current 180° sin, 50 Hz, Tc=55°C, double side cooled 15283 A I FSM Surge forward current Sine wave, 10 ms without reverse voltage 190 16 kA 3 1280 x 10 I² t I² t V FM Forward voltage V F(TO) r F Forward current = 6000 A A²s 25 0,94 V Threshold voltage 190 0,70 V Forward slope resistance 190 0,040 mohm SWITCHING t rr Reverse recovery time Q rr Reverse recovery charge I rr Peak reverse recovery current µs 190 µC A MOUNTING R th(j-c) Thermal impedance, DC Junction to case, double side cooled 9,0 °C/kW R th(c-h) Thermal impedance Case to heatsink, double side cooled 5,0 °C/kW T j Operating junction temperature F Mounting force Mass -30 / 190 °C 25.0 / 50.0 kN 50 ORDERING INFORMATION : AUS501 S 06 standard specification VRRM/100 g AUS501 RECTIFIER DIODE FINAL SPECIFICATION Mar. 17 - Issue: 4 DISSIPATION CHARACTERISTICS SQUARE WAVE Th [°C] 200 180 160 140 120 100 80 60 30° 40 0 2000 4000 60° 90° 6000 120° 8000 180° 10000 DC 12000 14000 IF(AV) [A] PF(AV) [W] 16000 180° 14000 90° 12000 DC 120° 60° 30° 10000 8000 6000 4000 2000 0 0 2000 4000 6000 IF(AV) [A] 8000 10000 12000 14000 AUS501 RECTIFIER DIODE FINAL SPECIFICATION Mar. 17 - Issue: 4 DISSIPATION CHARACTERISTICS SINE WAVE Th [°C] 200 180 160 140 120 100 80 60 30° 40 0 2000 60° 4000 90° 6000 120° 180° 8000 10000 IF(AV) [A] PF(AV) [W] 16000 120° 180° 90° 14000 60° 30° 12000 10000 8000 6000 4000 2000 0 0 2000 4000 IF(AV) [A] 6000 8000 10000 AUS501 RECTIFIER DIODE FINAL SPECIFICATION Mar. 17 - Issue: 4 FORWARD CHARACTERISTIC Tj = 190 °C SURGE CHARACTERISTIC Tj = 190 °C 25000 18 16 14 12 15000 ITSM [kA] Forward Current [A] 20000 10000 10 8 6 4 5000 2 0 0 0 0,5 1 1,5 2 1 Forward Voltage [V] 10 n° cycles TRANSIENT THERMAL IMPEDANCE DOUBLE SIDE COOLED 10 9 8 Zth j-h [°C/kW] 7 6 5 4 3 2 1 0 0,001 0,01 0,1 1 10 100 t[s] Distributed by All the characteristics given in this data sheet are guaranteed only with uniform clamping force, cleaned and lubricated heatsink, surfaces with flatness < .03 mm and roughness < 2 µm. In the interest of product improvement POSEICO SpA reserves the right to change any data given in this data sheet at any time without previous notice. If not stated otherwise the maximum value of ratings (simbols over shaded background) and characteristics is reported. 100