Snap Action Switch Single Pole General Purpose E13, E14, G13 Features Typical Applications Choice of 3 current ratings Long life coil spring, snap action mechanism Agency approved extended life versions available RoHS compliant High temperature versions available – contact factory • • • • • Part Number Breakdown E13-00E0 Example: E13-00E0 is a 15 A, normally open SPDT pole switch with a standard ratio button actuator. 1 Series Type Single pole E13 15 A Single pole E14 25 A Single pole G13 0.1 A Household appliances Automated assembly lines Brake switch on utility vehicles Industrial and accessible door openers Vending machines • • • • • 1 Type Standard ratio actuator 0 or button Circuitry 0 Double Throw A Button for E14 5 1 Normally Open E Button for E13 2 Normally Closed H Lever J K Button with ferrule Roller Button with extra over-travel and ferrule High ratio actuator Actuator 1 Actuator Type 5 only available with H and K actuators M Electrical Specifications per UL1054 E13 2 6000 operations; 100,000 available – contact factory E14 2 6000 operations G13 15 A, 125 / 250 VAC ¾ HP, 125 VAC / 1 ½ 2HP, 250 VAC 2 A, 48 VDC 25 A, 125 / 250 VAC 1 HP, 125 VAC / 2 2HP, 250 VAC 2 A, 48 VDC 0.1 A, 125 VAC 0.1 A, 30 VDC 100,000 operations 2 DC ratings to 105 ⁰C (221 ⁰F) only Commonly Stocked Distributor Parts E13-00E0 E13-00H0 E13-00J0 E13-00K0 E13-00M0 E13-01E0 E13-01H0 E13-50H0 E14-00A0 E14-00H0 E14-00K0 E14-00M0 E14-01M0 E14-50H0 G13-00M0 G13-50H0 Notes: Part numbers with a leading 0 are functionally no different than without a leading 0 (ex.: 0E13-00E0 is the same switch as E13-00E0). Quick-connect terminals are standard; for custom screw terminals, contact the factory or your distributor. For configurable part numbers not listed above or for custom part numbers, contact the factory or your distributor www.cherryswitches.com Page 1 of 3, Last update 2015-04-08, Specifications subject to change without notice. 3 Actuator Specifications E13/G13 Series Actuator E H H J K K M High ratio High ratio Max Operating Force g (lb) 425 (0.94) 100 (0.22) 65 (0.14) 425 (0.94) 100 (0.22) 63 (0.14) 425 (0.94) Max Pre-Travel Operating Point4 Min OverTravel mm (in) 1.27 (0.050) 6.35 (0.250) 8.71 (0.343) 1.27 (0.050) 6.35 (0.250) 10.24 (0.403) 1.27 (0.050) mm (in) 7.24 ± 0.51 (0.285 ± 0.020) 7.93 ± 1.57 (0.312 ± 0.062) 7.14 ± 1.57 (0.281 ± 0.062) 17.02 ± 0.76 (0.670 ± 0.030) 18.24 ± 1.57 (0.718 ± 0.062) 17.45 ± 1.57 (0.687 ± 0.062) 20.63 ± 0.76 (0.812 ± 0.030) mm (in) 2.54 (0.100) 4.75 (0.187) 4.75 (0.187) 2.74 (0.108) 4.75 (0.187) 4.75 (0.187) 5.54 (0.218) Max Movement Differential mm (in) 0.38 (0.015) 2.36 (0.093) 3.56 (0.14) 0.38 (0.015) 2.36 (0.093) 2.36 (0.093) 0.38 (0.015) Actuation Length5 mm (in) N/A 38.10 (1.500) 44.45 (1.750) N/A 35.33 (1.391) 41.28 (1.625) N/A E14 Series Max Max Operating Point4 Min OverMax Actuation Operating Pre-Travel Travel Movement Length5 Force Differential g (lb) mm (in) mm (in) mm (in) mm (in) mm (in) A 850 (1.87) 2.54 (0.100) 6.30 ± 0.66 (0.248 ± 0.026) 1.27 (0.050) 0.38 (0.015) N/A H 280 (0.62) 7.93 (0.312) 11.89 ± 1.57 (0.468 ± 0.062) 2.67 (0.105) 1.27 (0.050) 20.85 (0.821) H High ratio 170 (0.37) 13.34 (0.525) 11.10 ± 1.57 (0.437 ± 0.062) 5.54 (0.218) 2.03 (0.080) 27.20 (1.071) J 850 (1.87) 2.54 (0.100) 16.08 ± 0.76 (0.633 ± 0.030) 1.27 (0.050) 0.38 (0.015) N/A K 285 (0.63) 8.84 (0.348) 21.84 ± 1.57 (0.860 ± 0.062) 3.30 (0.130) 1.14 (0.045) 17.48 (0.688) K High ratio 211 (0.47) 12.27 (0.483) 21.03 ± 1.57 (0.828 ± 0.062) 5.54 (0.218) 1.85 (0.073) 23.95 (0.943) M 850 (1.87) 2.54 (0.100) 19.69 ± 0.76 (0.775 ± 0.030) 4.27 (0.168) 0.38 (0.015) N/A 3 Contact factory regarding combinations not shown 4 Measured above reference line; refer to dimensional drawing below 5 Actuator tolerances ± 0.791 mm (0.031”); G13 has operating point tolerance of ± 7.62 (0.30); E14 H and K actuators are shorter and formed up 11⁰ at the button Actuator Material Specifications Case Actuating Button Common Terminal General Purpose Phenolic Thermoplastic Copper Alloy NO and NC Terminal Copper Alloy (E13, G13) Copper (E14) Moving Blade Copper Alloy (E13, G13) Copper (E14) Spring Auxiliary Actuators Roller Contacts Stainless Steel Cold-Rolled Steel (Nickel-Plated) Sintered Stainless Steel Gold Crosspoint (G13) Silver Alloy (E13, E14) Environmental Specifications Temperature Rating 105 ⁰C (221 ⁰F) standard 150 ⁰C (302 ⁰F) available 200 ⁰C (392 ⁰F) available for E13 Flammability Rating UL94HB Dimensions – see page 3 www.cherryswitches.com Page 2 of 3, Last update 2015-04-08, Specifications subject to change without notice. Dimensions – mm (inches) Actuators www.cherryswitches.com Page 3 of 3, Last update 2015-04-08, Specifications subject to change without notice.