CREE C460TR3547-0220 Rectangular led rf performance maximum dc forward current 150 ma Datasheet

TR3547™ LEDs
CxxxTR3547-Sxx00
Data Sheet
Cree’s TR3547 LEDs are the next generation of solid-state LED emitters that combine highly efficient InGaN materials
with Cree’s proprietary device technology and silicon-carbide substrates to deliver superior value for the TV-backlighting
and general-illumination markets. The TR3547 LEDs are among the brightest in the top-view market while delivering a
low forward voltage, resulting in a very bright and highly efficient solution. The design is optimally suited for industrystandard top-view packages.
FEATURES
APPLICATIONS
•
•
Rectangular LED RF performance
–
450 & 460 nm – 70 mW min
Large LCD backlighting
–
Television
•
Low forward voltage - 3.2 Vf typical at 50 mA
•
General illumination
•
Maximum DC forward current – 150 mA
•
Medium LCD backlighting
•
1000-V ESD threshold rating
–
Portable PCs
•
InGaN junction on thermally conductive SiC
–
Monitors
substrate
•
LED video displays
•
White LEDs
CxxxTR3547-Sxx00 Chip Diagram
Die Cross Section
Top View
Bottom View
CPR3FJ Rev.
Data Sheet:
TR3547 LED
470 x 350 μm
Anode (+)
90 μm diameter
Bottom Area
320 x 200 μm
Junction
430 x 310 μm
Cathode (-)
98 x 98 μm
t = 155 μm
Subject to change without notice.
www.cree.com
1
Maximum Ratings at TA = 25°C Notes 1&3
CxxxTR3547-Sxx00
DC Forward Current
150 mA
Peak Forward Current (1/10 duty cycle @ 1 kHz)
200 mA
LED Junction Temperature
150°C
Reverse Voltage
5V
Operating Temperature Range
-40°C to +100°C
Storage Temperature Range
Electrostatic Discharge Threshold (HBM)
-40°C to +100°C
1000 V
Note 2
Electrostatic Discharge Classification (MIL-STD-883E)
Class 2
Note 2
Typical Electrical/Optical Characteristics at TA = 25°C, If = 50 mA
Part Number
Forward Voltage (Vf, V)
Note 3
Reverse Current
[I(Vr=5V), μA]
Full Width Half Max
(λD, nm)
Min.
Typ.
Max.
Max.
Typ.
C450TR3547-Sxx00
2.9
3.2
3.5
2
20
C460TR3547-Sxx00
2.9
3.2
3.5
2
21
Mechanical Specifications
Description
CxxxTR3547-Sxx00
Dimension
Tolerance
P-N Junction Area (μm)
310 x 430
±35
Chip Area (μm)
350 x 470
±35
155
±15
Au Bond Pad Diameter Anode (μm)
90
-5, +15
Au Bond Pad Thicknesses (μm)
1.0
±0.5
98 x 98
-5, +15
200 x 320
±35
Chip Thickness (μm)
Au Bond Pad Area Cathode (μm)
Bottom Area (μm)
Notes:
1.
2.
3.
Maximum ratings are package-dependent. The above ratings were determined using a Cree SMT package (with silicone
encapsulation) for characterization. Ratings for other packages may differ. Junction temperature should be characterized in a
specific package to determine limitations. Assembly processing temperature must not exceed 325°C (< 5 seconds).
Product resistance to electrostatic discharge (ESD) according to the HBM is measured by simulating ESD using a rapid avalanche
energy test (RAET). The RAET procedures are designed to approximate the maximum ESD ratings shown.
All products conform to the listed minimum and maximum specifications for electrical and optical characteristics when assembled
and operated at 50 mA within the maximum ratings shown above. Efficiency decreases at higher currents. Typical values given
are within the range of average values expected by manufacturer in large quantities and are provided for information only. All
measurements were made using lamps in T-1 3/4 packages (with Hysol OS4000 epoxy encapsulant and silicone die attach). Optical
characteristics measured in an integrating sphere using Illuminance E.
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks, and TR and TR3547 are trademarks of Cree, Inc.
2
CPR3FJ Rev. -
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com
Standard Bins for CxxxTR3547-Sxx00
LED chips are sorted to the radiant flux and dominant wavelength bins shown. A sorted die sheet contains die from
only one bin. Sorted die kit (CxxxTR3547-Sxxxx) orders may be filled with any or all bins (CxxxTR3547-xxxx) contained
in the kit. All radiant flux and dominant wavelength values shown and specified are at If = 50 mA.
Radiant Flux (mW)
C450TR3547-S7500
C450TR3547-0217
C450TR3547-0218
C450TR3547-0219
C450TR3547-0220
C450TR3547-0213
C450TR3547-0214
C450TR3547-0215
C450TR3547-0216
C450TR3547-0209
C450TR3547-0210
C450TR3547-0211
C450TR3547-0212
C450TR3547-0205
C450TR3547-0206
C450TR3547-0207
C450TR3547-0208
94
88
82
76
445
447.5
450
452.5
455
Dominant Wavelength (nm)
Radiant Flux (mW)
C460TR3547-S7600
C460TR3547-0217
C460TR3547-0218
C460TR3547-0219
C460TR3547-0220
C460TR3547-0213
C460TR3547-0214
C460TR3547-0215
C460TR3547-0216
C460TR3547-0209
C460TR3547-0210
C460TR3547-0211
C460TR3547-0212
C460TR3547-0205
C460TR3547-0206
C460TR3547-0207
C460TR3547-0208
94
88
82
76
455
457.5
460
462.5
465
Dominant Wavelength (nm)
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks, and TR and TR3547 are trademarks of Cree, Inc.
3
CPR3FJ Rev. -
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com
Relative Light Inten
Characteristic Curves
300%
250%
200%
150%
100%
50%
0%
0
50
100
150
200
These are representative measurements for the TR LED product. Actual curves will vary slightly
If (mA)for the various radiant
flux and dominant wavelength bins.
Wavelength Shift vs. Forward Current
Forward Current vs. Forward Voltage
Dominant Wavelength Shift (nm)
200
If (mA)
150
100
50
0
0
1
2
3
4
2
1
0
-1
-2
0
5
50
100
Vf (V)
200
If (mA)
Relative Intensity vs. Forward Current
120
400%
350%
Relative Intensity (%)
Relative Light Intensity
150
300%
250%
200%
150%
100%
50%
Relative Intensity vs Peak Wavelength
100
80
60
40
20
0
0%
0
50
100
150
200
If (mA)
320
420
520
620
Wavelength (nm)
Dominant Wavelength Shift (nm)
Wavelength Shift vs. Forward Current
2
1
0
-1
-2
0
50
100
150
200
If (mA)
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks, and TR and TR3547 are trademarks of Cree, Inc.
4
CPR3FJ Rev. -
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com
Radiation Pattern
This is a representative radiation pattern for the TR LED product. Actual patterns will vary slightly for each chip.
Copyright © 2009, Cree, Inc.
Confidential
pg. 1
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks, and TR and TR3547 are trademarks of Cree, Inc.
5
CPR3FJ Rev. -
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com
Similar pages