Datatronic DR350-9-683 Shielded smd inductor dr350-9 sery Datasheet

August 24, 2009
SHIELDED SMD INDUCTOR DR350-9 SERIES
Features





Low Profile Surface Mount Design
Flat Top for Pick and Place
Inductance Range from 4.7µH to 100.0µH
Operating Temp. -40°C to +85°C
Tinned Leads with Leaded Solder is Available (note 7)
ELECTRICAL SPECIFICATIONS AT 25ºC
Inductance
(H)  20%
4.7
6.8
10.0
15.0
22.0
33.0
47.0
68.0
100.0
Part No.
DR350-9-472
DR350-9-682
DR350-9-103
DR350-9-153
DR350-9-223
DR350-9-333
DR350-9-473
DR350-9-683
DR350-9-104
DCR
()  20%
0.036
0.052
0.068
0.100
0.120
0.180
0.270
0.390
0.620
I sat
(A) Max.
1.60
1.50
1.30
1.00
0.77
0.69
0.59
0.50
0.42
I rms
(A) Max.
2.50
2.20
1.80
1.40
1.30
1.10
0.92
0.78
0.64
MECHANICAL OUTLINES
6.0 0.2
2.8 0.2
4.0
2.0
6.0 0.2
1
XXX
2
TOP VIEW
SIDE VIEW
BOTTOM VIEW
1
1.5
2.2
1.5
4.0
PCB PAD LAYOUT (REF.)
2
SCHEMATIC
Notes:
1. All dimensions are shown in millimeter “mm”
2. General tolerance 0.2mm, unless other specified
3. Inductance Test: 1kHz, 0.5Vrms
4. Irms for an approximate 45C temperature rise
5. Isat for an approximate 20% drop maximum of the nominal value
6. Tape and reel quantity, 1000 pcs/reel
7. For non-RoHS parts replace DR prefix with 42- (e.g. DR350-9 becomes 42-350-9)
8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020D
DATATRONIC: 28151 Highway 74, Romoland, CA 92585
Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.
Similar pages