High-power LED Drivers for Ιllumination BP5841-1 AC100V input, constant current Dimensions (Unit : mm) Absolute Maximum Ratings Unit 170 36 1.8 V Vpk kV Maximum surface temperature Tcmax 105 °C Operating temperature range Storage temperature range Topr Tstg −20 to +80 −25 to +85 °C °C 32.5±0.4 15.1Max. DC 1s (between primary and secondary) Ambient temperature + module self-heating Tcmax Refer to derating curve MARKING SIDE Limits Vi Vo BV 24.5±0.5 Symbol 4.0±1.0 Parameter Input voltage Output voltage Withstand voltage 1 9 10 11 3 4 5 0.5±0.1 P=2.54±0.2 2.54x10=25.4 (Typ.) 2.6±1.4 0.25±0.05 10.6Max. 4.5Max. Electrical Characteristics Typ. 141 150 − − − 84 Max. 170 158 36 30 0.5 − Unit V mA V V Vp-p % Conditions Vi=141V, R1=1.2Ω (1%) Vi=141V, lo=100mA Vi=141V, lo=150mA Vi=141V, lo=150mA Vi=141V, Vo=30V, lo=150mA Derating Curve 4 3 1 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient Temperature Ta(°C) Application circuit BP5841-1 Be sure to use fuse for safety 1 3 9 10 11 F1 R1 D1 LF1 C2 + C1 Pin No. 1 2 3 4 5 6 7 8 9 10 11 Function Input terminal (+) Skip Input terminal (−) NC NC Skip Skip Skip Output capacitor connection terminal LED connection terminal (cathode) LED connection terminal (anode) Output Current (A) Output Characteristics BP5841-1 C3 Operation Range 2 ∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curve. ∗2 Spike noise is not included in output ripple voltage. ZNR1 Derating Curve 5 Output Power (W) Symbol Min. Parameter Input voltage range 113 Vi Output current 142 Io Output voltage range1 12.5 Vo Output voltage range2 12.5 Output ripple voltage − Vp Power conversion efficiency 80 η 0.200 0.175 0.150 0.125 0.100 0.075 0.050 0.025 0.000 10 C4 Output characteristics R1=1.2Ω R1=2.0Ω Operation Range 15 20 25 30 Output Voltage(V) 35 36 C5 Setting current C1 : Input Capacitor 22µF/250V C2 : Output Capacitor 4.4µF/25V Ceramics capacitor R1 : Output current setting resistor 1.2Ω ±1 % 1/4W (lo=150mA) C3, C4: Noise Removal Capacitor Please use the capacitor, if necessary. Capacitance : 0.1µF to 0.22µF Rated voltage : 250V or higher C5 : Noise Removal Capacitor 2200pF (Basic insulation) D1: Diode bridge 800V/1A F1: Fuse Fuse must be used for safety LF1: Line Filter 10mH ZNR1: Varistor Varistor must be used. It protects this part from lighting surge and static electricity. Setting resistor : R1(Ω) Output current-Setting resistor External components setting 30 25 20 15 10 5 0 0.01 0.03 0.05 0.07 0.09 0.11 0.13 0.15 Output current : (A) How to calculate R1 R1=0.9362/(6.2 lo-0.151) lo : Output current 40 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0