CT CTS5F-5R0K Shielded inductors - axial Datasheet

Shielded Inductors - Axial
CTS5F Series
SPECIFICATIONS
Please specify tolerance code when ordering.
CTS5F-1R0_
J = ±5%, K = ±10%
From 1 µH to 100 µH
Inductance
(µH)
L Test
Freq.
(MHz)
Q
Factor
Min.
CTS5F-1R0_
CTS5F-2R5_
CTS5F-5R0_
1.0
2.5
5.0
7.9
7.9
7.9
55
45
35
CTS5F-100_
CTS5F-250_
CTS5F-500_
10
25
50
2.5
2.5
2.5
CTS5F-101_
100
2.5
Part
Number
Not shown at actual size.
ctparts.com
Q Test
Freq.
(MHz)
SRF
Min.
(MHz)
DCR
Max.
Ω)
(Ω
Rated
DC
(mA)
7.9
7.9
7.9
200
115
90
.05
.08
.12
2200
1700
1400
65
55
60
2.5
2.5
2.5
55
35
27
.42
.80
1.50
770
560
400
70
2.5
20
3.10
280
PHYSICAL DIMENSIONS
Size
mm
inches
A
B
Max.
Max.
11.4 ± 0.25
3.81 ± 0.25
29.2
0.6430
0.15 ± 0.010
1.15
0.02535
RoHS
CHARACTERISTICS
Description: Axial leaded molded (shielded) inductor
Applications: Used for high reliability applications. Vital for
telecommunication applications. Ideal for various RF applications
Operating Temperature: -55°C to +105°C
Inductance Tolerance: ±5% & ±10%
Testing: Inductance and Q are tested on an HP4285A at
specified frequency
Packaging: Bulk pack, 500 parts per bag,
Tape & Reel, 2,500 parts per reel
Current Rating: Based on .33 watt power dissipation for
approximately 20°C temperature rise
Marking: Printed with inductance code
Miscellaneous: RoHS Compliant.
Testing: Inductance is measured on an HP4285A at 1 kHz
Leads: Soft copper and pre-tinned
Additional Information: Additional electrical & physical
information available upon request
Samples available. See website for ordering information.
12.27.05
Technologies
22 AWG
0.45 ± 0.010
Compliant
CENTRAL
C
Typ.
Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids
800-684-5322 Inside US
949-453-1811 Outside US
Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice
Similar pages