Marketing Bulletin DATE: April 7, 2003 TO: Affected Customers FROM: Mark Stoner RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the termination of the following Ecliptek series effective April 7th, 2003: Series E11F4 E13F4 E31F4 E32F4 Description 5 pin DIP PECL Oscillator, 5V 5 pin DIP PECL Oscillator, 3.3V 5 pin DIP PECL VCXO, 5V 5 pin DIP PECL VCXO, 3.3V Recommended Replacement E11F1 E13F1 E31F1 E32F1 Because of the circumstances surrounding this termination, there will be no end-of-life policy exercised. The series will be terminated with no purchasing or lifetime buy window available. All of us at Ecliptek Corporation apologize for any inconvenience this may have caused and can assure you we are taking measures to insure this will not happen again in the future. Best Regards, Mark W. Stoner Director of Marketing Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 E11F4 Series E11F4 • PECL Output Oscillators • 5.0V supply voltage • 14 pin DIP package (5 pin) • Stability to 20ppm • Output Enable/Disable available • Complementary Output available H 8.0 L 20.8 W 13.2 OSCILLATOR NOTES OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 19.440MHz to 250.000MHz Operating Temperature Range 0°C to 70°C Available at Frequencies < 212.500MHz -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VCC) 5.0VDC ±5% Input Current 100mA Maximum Logic Type 100KH Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance ±100ppm, ±50ppm, ±25ppm, or at 25°C, Frequency Stability over the Operating ±20ppm Maximum Temperature Range, Supply Voltage Change, Output Load Change, Aging, Shock, and Vibration Output Voltage Logic High (VOH) VCC-1.025VDC Minimum Output Voltage Logic Low (VOL) VCC-1.620VDC Maximum Rise Time / Fall Time 20% to 80% of waveform 2 nSeconds Maximum Duty Cycle at 50% of waveform 50 ±10(%) 50 ±5(%) Load Drive Capability 50 Ohms into VCC-2.0VDC Logic Control / Additional Output No Connect, Enable/Disable, Complementary Output, or Complementary Output and Enable/Disable Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum Enables Output No Connection Enables Output VIH of VCC-1.165VDC Minimum Disables Output: Logic Low Disables Complementary Output: Logic High Start Up Time 10 mSeconds Maximum RMS Phase Jitter FJ = 12kHz to 20MHz 1 pSec Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E11F4 14 pin DIP 5.0V OS86 01/03 800-ECLIPTEK www.ecliptek.com for latest revision 86 Specifications subject to change without notice. PART NUMBERING GUIDE E11F4 F 2 C - 155.520M FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=±100ppm Maximum over 0°C to +70°C D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C F=±20ppm Maximum over 0°C to +70°C G=±100ppm Maximum over -40°C to +85°C H=±50ppm Maximum over -40°C to +85°C FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect B=Enable/Disable C=Complementary Output D=Complementary Output and Enable/Disable DUTY CYCLE 1=50% ±10%, 2=50% ±5% NOTES OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1: Enable/Disable or No Connect Pin 7: Case Ground Pin 8: Output Pin 9: Complementary Output or No Connect Pin 14: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 2: XX.XXX M Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E11F4 14 pin DIP 5.0V OS86 01/03 800-ECLIPTEK www.ecliptek.com for latest revision 87 Specifications subject to change without notice. E13F4 Series E13F4 • LVPECL Output Oscillators • 3.3V supply voltage • 14 pin DIP package (5 pin) • Stability to 20ppm • Output Enable/Disable available • Complementary Output available H 8.0 L 20.8 W 13.2 OSCILLATOR NOTES OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 19.440MHz to 250.000MHz Operating Temperature Range 0°C to 70°C Available at Frequencies < 212.500MHz -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VCC) 3.3VDC ±5% Input Current 75mA Maximum Logic Type 100KH Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at ±100ppm, ±50ppm, ±25ppm, or 25°C, Frequency Stability over the Operating Tem- ±20ppm Maximum perature Range, Supply Voltage Change, Output Load Change, Aging, Shock, and Vibration Output Voltage Logic High (VOH) VCC-1.025VDC Minimum Output Voltage Logic Low (VOL) VCC-1.620VDC Maximum Rise Time / Fall Time 20% to 80% of waveform 2 nSeconds Maximum Duty Cycle at 50% of waveform 50 ±10(%) 50 ±5(%) Load Drive Capability 50 Ohms into VCC-2.0VDC Logic Control / Additional Output No Connect, Enable/Disable, Complementary Output, or Complementary Output and Enable/Disable Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum Enables Output No Connection Enables Output VIH of VCC-1.165VDC Minimum Disables Output: Logic Low Disables Complementary Output: Logic High Start Up Time 10 mSeconds Maximum RMS Phase Jitter FJ = 12kHz to 20MHz 1 pSec Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E13F4 14 pin DIP 3.3V OS85 01/03 800-ECLIPTEK www.ecliptek.com for latest revision 90 Specifications subject to change without notice. PART NUMBERING GUIDE E13F4 F 2 C - 155.520M FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=±100ppm Maximum over 0°C to +70°C D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C F=±20ppm Maximum over 0°C to +70°C G=±100ppm Maximum over -40°C to +85°C H=±50ppm Maximum over -40°C to +85°C FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect B=Enable/Disable C=Complementary Output D=Complementary Output and Enable/Disable DUTY CYCLE 1=50% ±10%, 2=50% ±5% NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1: Enable/Disable or No Connect Pin 7: Case Ground Pin 8: Output Pin 9: Complementary Output or No Connect Pin 14: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 2: XX.XXX M Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E13F4 14 pin DIP 3.3V OS85 01/03 800-ECLIPTEK www.ecliptek.com for latest revision 91 Specifications subject to change without notice. E31F4 Series E31F4 • PECL Output VCXO • 5.0V supply voltage • 14 pin DIP package (5 pin) • Stability to 20ppm • Complementary Output available • Custom lead length H 8.0 L 20.8 W 13.2 OSCILLATOR NOTES OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 19.440MHz to 212.500MHz Operating Temperature Range 0°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VCC) 5.0VDC ±5% Input Current 100mA Maximum Logic Type 100KH Frequency Tolerance / Stability Inclusive of Operating Temp Range, Supply Voltage, ±50ppm, ±25ppm, or Load, and Aging @25°C over 10 years ±20ppm Maximum Output Voltage Logic High (VOH) VCC-1.025VDC Minimum Output Voltage Logic Low (VOL) VCC-1.620VDC Maximum Rise Time / Fall Time 20% to 80% of waveform 2 nSeconds Maximum Duty Cycle at 50% of waveform 50 ±10(%) 50 ±5(%) Load Drive Capability 50 Ohms into VCC-2.0VDC Additional Output Complementary Output or No Connect Start Up Time 10 mSeconds Maximum RMS Phase Jitter FJ = 12kHz to 20MHz 1 pSec Maximum Absolute Pull Range (APR) Inclusive of Operating Temp Range, Supply Voltage, ±50ppm Minimum Load, and Aging @25°C over 10 years Linearity 20%, 15%, or 10% Maximum Control Voltage (VC): Test Conditions for APR 2.5VDC ±2.0VDC Control Voltage Range (VCR) 0.0VDC to VCC Center Control Voltage 2.5VDC Transfer Function Positive Transfer Characteristic Input Impedance 50kOhms Typical Modulation Bandwidth at -3dB with Control Voltage of +2.5VDC 10kHz Minimum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E31F4 14 pin DIP 5.0V OS88 01/03 800-ECLIPTEK www.ecliptek.com for latest revision 104 Specifications subject to change without notice. PART NUMBERING GUIDE E31F4 F 3 A 2 C - 155.520M - CL125 FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C F=±20ppm Maximum over 0°C to +70°C H=±50ppm Maximum over -40°C to +85°C AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 153) G=Full Size Gull Wing (See Page 152) APR 3=±50ppm Minimum ADDITIONAL OUTPUT A=No Connect C=Complementary Output FREQUENCY LINEARITY A=20% B=15% C=10% DUTY CYCLE 1=50 ±10(%) 2=50 ±5(%) NOTES OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 9: Complementary Output or No Connect Pin 14: Supply Voltage Pin 1: Voltage Control Pin 7: Case Ground Pin 8: Output MARKING SPECIFICATIONS Line 1: ECLIPTEK ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 2: XX.XXX M Characteristic Specification Seal Integrity Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum. Solderability Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Shock Random drop on hard wooden plate 3 times from a height of 20cm. Vibration Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E31F4 14 pin DIP 5.0V OS88 01/03 800-ECLIPTEK www.ecliptek.com for latest revision 105 Specifications subject to change without notice. E32F4 Series E32F4 • LVPECL Output VCXO • 3.3V supply voltage • 14 pin DIP package (5 pin) • Stability to 20ppm • Complementary Output available • Custom lead length H 8.0 L 20.8 W 13.2 OSCILLATOR OBSOLETE NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 19.440MHz to 212.500MHz Operating Temperature Range 0°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VCC) 3.3VDC ±5% Input Current 75mA Maximum Logic Type 100KH Frequency Tolerance / Stability Inclusive of Operating Temp Range, Supply Voltage, ±50ppm, ±25ppm, or Load, and Aging @25°C over 10 years ±20ppm Maximum Output Voltage Logic High (VOH) VCC-1.025VDC Minimum Output Voltage Logic Low (VOL) VCC-1.620VDC Maximum Rise Time / Fall Time 20% to 80% of waveform 2 nSeconds Maximum Duty Cycle at 50% of waveform 50 ±10(%) 50 ±5(%) Load Drive Capability 50 Ohms into VCC-2.0VDC Additional Output Complementary Output or No Connect Start Up Time 10 mSeconds Maximum RMS Phase Jitter FJ = 12kHz to 20MHz 1 pSec Maximum Absolute Pull Range (APR) Inclusive of Operating Temp Range, Supply Voltage, ±50ppm Minimum Load, and Aging @25°C over 10 years Linearity 20%, 15%, or 10% Maximum Control Voltage (VC): Test Conditions for APR 1.65VDC ±1.35VDC Control Voltage Range (VCR) 0.0VDC to VCC Center Control Voltage 1.65VDC Transfer Function Positive Transfer Characteristic Input Impedance 50kOhms Typical Modulation Bandwidth at -3dB with Control Voltage of +1.65VDC 10kHz Minimum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E32F4 14 pin DIP 3.3V OS87 01/03 800-ECLIPTEK www.ecliptek.com for latest revision 108 Specifications subject to change without notice. PART NUMBERING GUIDE E32F4 F 3 A 2 C - 155.520M - CL125 FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C F=±20ppm Maximum over 0°C to +70°C H=±50ppm Maximum over -40°C to +85°C AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 153) G=Full Size Gull Wing (See Page 152) APR 3=±50ppm Minimum ADDITIONAL OUTPUT A=No Connect C=Complementary Output FREQUENCY LINEARITY A=20% B=15% C=10% DUTY CYCLE 1=50 ±10(%) 2=50 ±5(%) NOTES OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 9: Complementary Output or No Connect Pin 14: Supply Voltage Pin 1: Voltage Control Pin 7: Case Ground Pin 8: Output MARKING SPECIFICATIONS Line 1: ECLIPTEK ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 2: XX.XXX M Characteristic Specification Seal Integrity Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum. Solderability Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Shock Random drop on hard wooden plate 3 times from a height of 20cm. Vibration Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E32F4 14 pin DIP 3.3V OS87 01/03 800-ECLIPTEK www.ecliptek.com for latest revision 109 Specifications subject to change without notice.