8 Pin Mini DIP and Mini DIL 5 Tap TTL Compatible Active Delay Lines ELECTRONICS INC. EP9458-XXW & EP9458-XXW-LF Add “-LF” after part number for Lead-Free PCA Part Number EP9458-25W(-LF) EP9458-30W(-LF) EP9458-35W(-LF) EP9458-40W(-LF) EP9458-45W(-LF) EP9458-50W(-LF) EP9458-60W(-LF) EP9458-75W(-LF) EP9458-100W(-LF) EP9458-125W(-LF) Total Delay (†±5% or ± 2nS) Tap Delays (†±5% or ± 2nS) 5, 10, 15, 20 6, 12, 18, 24 7, 14, 21, 28 8, 16, 24, 32 9, 18, 27, 36 10, 20, 30, 40 12, 24, 36, 48 15, 30, 45, 60 20, 40, 60, 80 25, 50, 75, 100 PCA Part Number EP9458-150W(-LF) EP9458-175W(-LF) EP9458-200W(-LF) EP9458-225W(-LF) EP9458-250W(-LF) EP9458-300W(-LF) EP9458-350W(-LF) EP9458-400W(-LF) EP9458-450W(-LF) EP9458-500W(-LF) 25 30 35 40 45 50 60 75 100 125 Total Delay (†±5% or ± 2nS) Tap Delays (†±5% or ± 2nS) 30, 60, 90, 120 35, 70, 105, 140 40, 80, 120, 160 45, 90, 135, 180 50, 100, 150, 200 60, 120, 180, 240 70, 140, 210, 280 80, 160, 240, 320 90, 180, 270, 360 100, 200, 300, 400 150 175 200 225 250 300 350 400 450 500 †Whichever is greater. Delay times referenced from input to leading and trailing edges at 25°C, 5.0V, with no load. DC Electrical Characteristics Parameter VOH VOL VIK IIH Test Conditions Min. V CC = min. V IL = max. I OH = max 2.7 V CC = min. V IH = min. I OL = max V CC = min. II = II K V CC = max. VIN = 2.7V V CC = max. VIN = 5.25V IIL Low-Level Input Current V CC = max. VIN = 0.5V IOS Short Circuit Output Current V CC = max. V OUT = 0. -40 (One output at a time) ICCH High-Level Supply Current V CC = max. VIN = OPEN ICCL Low-Level Supply Current V CC = max. VIN = 0 TRO Output Rise Time Td ≤ 500 nS (0.75 to 2.4 Volts) NH Fanout High-Level Output V CC = max. V OH = 2.7V NL Fanout Low-Level Output V CC = max. V OL = 0.5V Max. Unit 0.5 -1.2 50 1.0 -2 -100 V V V µA mA mA mA High-Level Output Voltage Low-Level Output Voltage Input Clamp Voltage High-Level Input Current Schematic 8 7 VCC 2 6 3 5 OUTPUT INPUT 1 4 GROUND 75 mA 75 mA 4 nS 20 TTL Load 10 TTL Load Package Recommended Operating Conditions Min. VCC VIH VIL IIK IOH IOL PW* d* TA Supply Voltage High-Level Input Voltage Low-Level Input Voltage Input Clamp Current High-Level Output Current Low-Level Output Current Pulse Width of Total Delay Duty Cycle Operating Free-Air Temperature 4.75 2.0 Max. Unit PCA 5.25 V V V mA mA mA % % °C EP9458-25W(-LF) 0.8 -18 -1.0 20 40 0 40 +70 White Dot Pin 1 .400 (10.16) Date Code .500 (12.70) .250 (6.35) *These two values are inter-dependent. .150 Typ. (3.81) .018 x.010 (.457 x .254) .300 (7.62) .100 (2.54) Input Pulse Test Conditions @ 25° C EIN PW TRI PRR Pulse Input Voltage Pulse Width % of Total Delay Pulse Rise Time (0.75 - 2.4 Volts) Pulse Repetition Rate @ Td ≤ 200 nS Pulse Repetition Rate @ Td > 200 nS VCC Supply Voltage Unit 3.2 110 2.0 1.0 100 5.0 Volts % nS MHz KHz Volts EP9458W-XX EP9458-XXW-LF 1. Lead Finish Notes : SnPb Hot Tin Dip (Sn) 2. Peak Solder Rating 260°C 260°C 10 (+2/-0) seconds 10 (+2/-0) seconds (Wave Solder Process) 4. Weight 5. Packaging Information (Tube) TBD grams TBD grams TBD pieces/tube TBD pieces/tube Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CS9458-XXW & -LF Rev. B 12/5/06 RR TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com