Subminiature Slides Series AS Distinctive Characteristics Subminiature size (1/3 size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Available in various actuator lengths. Antistatic superstructure of carbon blended polyacetal prevents static discharge to the contacts. Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants. .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Matching indicators available and shown at the end of Section M. Actual Size NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Subminiature Slides Series AS General Specifications Electrical Capacity (Resistive Load) Logic Level: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel: Materials & Finishes Actuator: Upper Case Housing: Lower Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: PCB Processing Soldering: Cleaning: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. 50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 50,000 operations minimum 50,000 operations minimum 2.55N Nonshorting (break-before-make) Pretravel: .082” (2.1mm); Overtravel: .016” (0.4mm); Total Travel: .098” (2.5mm) Glass fiber reinforced polyamide Carbon blended polyacetal (antistatic) Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Brass with gold plating Brass with gold plating –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 192 hours @ 40°C (104°F) 10 ~ 60Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for 30 minutes 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: for single pole see Profile B in Supplement section; for double pole see Profile A. These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications UL Recognition or CSA Certification: The A Series slides have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Series AS Subminiature Slides TYPICAL SWITCH ORDERING EXAMPLE AS 2 POLES 1 SPST SPDT 2 DPDT SP3T 2 CIRCUITS A H ACTUATORS PC TERMINALS 1 ON NONE OFF A .098” (2.5mm) Long 2 ON NONE ON B Flush *B Straight with Bracket 3 ON OFF ON C .150” (3.8mm) Long *H Right Angle with Bracket 4 ON ON P Straight *V ON Vertical with Bracket * Bracketed models are ESD protected DESCRIPTION FOR TYPICAL ORDERING EXAMPLE AS22AH DPDT ON-NONE-ON Circuit .098” (2.5mm) Long Actuator Right Angle PC Terminals POLES & CIRCUITS Slide Position Connected Terminals Throw & Schematics Left Center Right Left Center Right Note: Terminal numbers are not actually on the switch. Pole Model SP AS11 ON NONE OFF 3-1 OPEN OPEN SPST SP AS12 AS13 ON ON NONE OFF ON ON 2-1 2-1 OPEN OPEN 2-3 2-3 SPDT AS22 AS23 ON ON NONE OFF ON ON 2-1 5-4 2-1 5-4 OPEN OPEN 2-3 5-6 2-3 5-6 DPDT DP 1 3 INTERNAL CONNECTION 2 (COM) 1 3 (COM) 2 1 3 5 6 4 For 3 Throw (3-On) Connected Terminals & Schematics Pole SP Model AS24 Left Center Right ON ON ON External Connection 5 2 (in) 1 (out) External Connection 3 4 (out) 6 (out) 2-1 5-4 External Connection 5 2 (in) 1 (out) 3 4 (out) 6 (out) 2-3 5-4 External Connection 5 2 (in) 1 (out) 3 4 (out) 6 (out) 2-3 5-6 The SP3T model utilizes a double pole base. External connections must be made during field installation. (out) (out) Common (in) 1 4 2 5 3 6 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com External Conn (out) 03-07 Subminiature Slides Series AS ACTUATORS .098” (2.5mm) Long A (2.5) .098 Flush B (2.4) .094 (2.4) .094 (2.4) .094 (2.4) .094 .150” (3.8mm) Long C (3.8) .150 (2.4) .094 (2.4) .094 Actuator Color: Gray standard; contact factory for other colors. PC TERMINALS P (5.08) Typ .200 Straight with Bracket B Straight (5.08) .200 (5.08) .200 (0.3) Typ .012 (2.54) Typ .100 (0.6) Dia Typ .024 H (10.16) .400 Right Angle with Bracket (2.54) Typ .100 (0.6) Dia Typ .024 (0.7) Typ .028 (9.0) .354 (8.8) .346 (5.08) .200 (2.54) Typ .100 (5.08) .200 (0.3) .012 (5.08) .200 (0.3) .012 (0.7) .028 (0.5) .020 (8.8) .346 Vertical with Bracket (2.54) Typ .100 (0.6) Dia Typ .024 (2.54) Typ .100 (0.8) .031 (9.0) .354 V (8.8) .346 (0.6) Dia Typ .024 (0.5) Typ .020 (0.7) .028 (9.0) .354 (9.0) .354 (8.8) .346 Use of a support bracket is recommended to increase PCB mounting strength and stability. TYPICAL SWITCH DIMENSIONS Straight PC Single Pole (2.4) Sq .094 (0.4) Typ .016 (2.06) .081 P/N This Side (0.6) Dia Typ .024 (9.8) .386 2 3 (0.3) .012 (2.5) Travel .098 (2.5) .098 (5.38) .212 AS12AP (0.8) .031 (9.1) .358 (2.54) Typ .100 CL (2.54) Typ .100 (0.8) Dia Typ .031 Single throw models do not have terminal 2. Double Pole (0.4) Typ .016 (2.4) Sq .094 (0.4) .016 (2.06) .081 P/N This Side (2.5) Travel .098 (9.2) .362 (2.5) .098 AS22AP (0.8) .031 (9.1) .358 (0.6) Dia Typ .024 1 4 2 5 3 6 (2.54) Typ .100 (3.1) .122 (9.8) .386 4 1 5 2 6 3 (5.08) .200 (2.54) Typ .100 (0.8) Dia Typ .031 (5.08) .200 Actuator shown in LEFT position Straight PC • Bracket Single Pole (2.4) Sq .094 (2.06) .081 P/N This Side (0.3) Typ .012 (0.6) Dia Typ .024 (10.16) .400 (5.7) .224 AS12AB 3 CL Actuator shown in LEFT position Straight PC 2 (1.0) .039 (3.1) .122 (1.0) .039 1 1 (0.3) .012 (2.5) Travel .098 (2.5) .098 (0.8) .031 (9.1) .358 (3.1) .122 1 1 (9.8) .386 2 3 (2.54) Typ .100 Actuator shown in LEFT position (1.0) .039 (0.7) Typ .028 CL (1.0) .039 (2.54) .100 (2.54) Typ .100 2 3 CL (0.8) Dia Typ .031 (2.54) .100 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Subminiature Slides Series AS TYPICAL SWITCH DIMENSIONS Straight PC • Bracket Double Pole P/N This Side (2.06) .081 (2.4) Sq .094 (0.3) Typ .012 (0.6) Dia Typ .024 (10.16) .400 (0.4) .016 (2.5) Travel .098 (0.8) .031 (9.1) .358 (2.5) .098 (9.5) .374 1 4 2 5 3 6 Right Angle PC (2.54) Typ .100 4 1 5 2 6 3 (0.8) Dia Typ .031 (0.7) Typ .028 (5.08) .200 (3.1) .122 (2.54) Typ .100 Single Pole (2.5) Travel .098 (2.06) .081 P/N This Side (2.4) Sq .094 (0.8) .031 (3.3) .131 (0.3) .012 (0.3) Typ .012 (5.08) .200 3 (0.7) .028 (9.8) .386 (9.9) .389 (2.5) .098 2 1 (3.1) .122 (5.08) .200 (6.18) .243 1 2 3 (2.54) Typ .100 (5.08) .200 (0.8) Dia Typ .031 (0.6) Dia Typ .024 (2.54) Typ .100 Actuator shown in LEFT position AS12AH (2.5) Travel .098 (2.06) .081 Double Pole (2.4) Sq .094 P/N This Side (0.4) .016 (0.3) Typ .012 (5.08) .200 (0.8) .031 (5.2) .205 (0.7) .028 (9.8) .386 (2.5) .098 (12.4) .489 (2.54) .100 (5.08) .200 3 2 1 6 5 4 (3.1) .122 (0.5) .020 (10.0) .394 1 2 (2.54) Typ .100 (2.54) 3 .100 4 5 6 (5.08) .200 (0.8) Dia Typ .031 (0.6) Dia Typ .024 (2.54) Typ .100 Actuator shown in LEFT position AS22AH Vertical PC Single Pole (2.4) Sq .094 (0.4) .016 (2.06) .081 (0.8) .031 P/N This Side 1 (5.3) .208 (2.5) Travel .098 (0.3) Typ .012 (2.54) .100 (0.7) Typ .028 (2.54) .100 (2.54) .100 (5.7) .224 (2.5) .098 (15.0) .589 (10.2) .402 2 3 (1.0) .039 (2.54) Typ .100 1 2 3 (0.5) .020 (1.0) (3.1) .039 .122 (2.54) Typ .100 (0.6) Dia Typ .024 (1.0) .039 (0.8) Dia Typ .031 (2.54) .100 CL CL Actuator shown in LEFT position AS12AV Vertical PC Double Pole (0.4) .016 (2.4) Sq .094 (0.3) Typ .012 (5.08) .200 AS22AV (9.8) .386 Actuator shown in LEFT position AS22AB Right Angle PC (5.08) .200 (9.5) .374 (2.06) .081 (2.5) Travel .098 (0.7) .028 (5.08) .200 (2.5) .098 P/N This Side (0.8) .031 (5.3) .208 (15.0) .589 (1.0) (0.5) (3.1) .039 .020 .122 (2.54) Typ .100 1 4 2 5 3 6 4 (10.2) .402 1 5 2 6 3 (5.08) .200 (2.54) Typ .100 (5.08) .200 (0.6) Dia Typ .024 (5.08) .200 (0.8) Dia Typ .031 Actuator shown in LEFT position NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07