Click on Series name for product info on aimtec.com Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter FEATURES: I/O Isolation 4000VAC Operating Temp: -40oC to +70oC Over load, Over Voltage, Short Circuit Protection Up to 83% efficiency Energy Star compliant Ultra small package CB Models Single output Model Input Voltage (VAC/Hz) Input Voltage (VDC) Max Output wattage (W) Output Voltage(V) Output Current max (A) Efficiency (%) Maximum capacitive load (µF) AMEL20-3.3SMAZ 90-264/47-440 130-370 13.2 3.3 4 5600 AMEL20-5SMAZ 90-264/47-440 130-370 20 5 4 4700 AMEL20-12SMAZ 90-264/47-440 130-370 20 12 1.66 3300 AMEL20-15SMAZ 90-264/47-440 130-370 20 15 1.33 2200 AMEL20-24SMAZ 90-264/47-440 130-370 20 24 0.84 1000 Note: Optional mounting plate version can be ordered by adding “-ST” suffix to part number (ex. AMEL20-5SMAZ-ST) 115 230 VAC VAC 75 79 81 83 83 73 78 81 81 82 Models Asymmetric Dual output Model AMEL20-3.35DMAZ AMEL20-3.312DMAZ AMEL20-3.315DMAZ AMEL20-3.324DMAZ AMEL20-512DMAZ AMEL20-515DMAZ AMEL20-524DMAZ AMEL20-1215DMAZ AMEL20-1224DMAZ AMEL20-1524DMAZ Input Voltage (VAC/Hz) 90-264/47-440 90-264/47-440 90-264/47-440 90-264/47-440 90-264/47-440 90-264/47-440 90-264/47-440 90-264/47-440 90-264/47-440 90-264/47-440 Input Voltage (VDC) Max Output wattage (W) 130-370 130-370 130-370 130-370 130-370 130-370 130-370 130-370 130-370 130-370 17.5 18 18 18 18 18 18 18 18 18 Output Voltage (V) 3.3/5 3.3/12 3.3/15 3.3/24 5/12 5/15 5/24 12/15 12/24 15/24 Rated Output Current (A) Efficiency (%) Maximum capacitive load (µF) 1.4/2.5 1.4/1.1 1.4/0.89 1.4/0.55 1.6/0. 83 1.6/0.66 1.6/0.46 0.66/0.66 0.58/0. 42 0.54/0. 42 1000 1000 1000 1000 680 680 680 560 560 560 AMEL20-3.3N5DMAZ 90-264/47-440 130-370 14.8 -3.3/5 -0.7/2.5 680 AMEL20-3.3N12DMAZ 90-264/47-440 130-370 18 -3.3/12 -1.4/1.1 680 AMEL20-3.3N15DMAZ 90-264/47-440 130-370 18 -3.3/15 -1.4/0.89 680 AMEL20-5N5DMAZ 90-264/47-440 130-370 14 -5/5 -0.8/2 680 AMEL20-5N12DMAZ 90-264/47-440 130-370 18 -5/12 -1.6/0. 83 470 AMEL20-5N15DMAZ 90-264/47-440 130-370 18 -5/15 -1.6/0.66 470 AMEL20-12N12DMAZ 90-264/47-440 130-370 18 -12/12 -0.66/0.83 470 AMEL20-12N15DMAZ 90-264/47-440 130-370 18 -12/15 -0.66/0.66 330 Note: Optional mounting plate version can be ordered by adding “-ST” suffix to part number (ex. AMEL20-5SMAZ-ST) 115 230 VAC VAC 75 78 77 76 76 78 76 77 79 80 76 78 77 76 77 79 77 78 80 81 75 76 76 75 75 75 77 76 76 77 77 76 76 76 78 77 *Output power must not exceed the listed values NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Current (full load) Inrush current <2ms (cold start) www.aimtec.com F 052e R8.V Conditions Typical 115VAC 230VAC 115VAC 230VAC Tel: +1 514 620 2722 1 of 6 Maximum 500 350 30 50 Units mA mA A A Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter Input Specifications (continued) Parameters Leakage current External fuse Input dissipation Start up time Conditions Typical Recommended slow blow type 110/230Vac 1.5 0.4 50 Conditions Typical Maximum 0.25 Units mA A W ms Output Specifications Parameters Voltage accuracy Line regulation Load regulation (single output) Load regulation (dual output) Transient recovery time Transient response deviation Ripple & Noise* Hold-up time Maximum ±2 ±1 ±2 ±3 500 ±2 75 100 10 25 0-100% load Unbalanced (0-100%) load 25% load step 3.3 & 5V models 12, 15 & 24V models 110VAC 230VAC Units % % % % µs % of Vout mV p-p ms *Ripple and Noise are measured at 20MHz bandwidth by using a 0.1μF (M/C) and 47µF (E/C) parallel capacitor. Isolation Specifications Parameters Tested I/O voltage Isolation resistance Conditions Typical 60 sec Rated Units 4000 VAC MΩ Maximum Units >1000 General Specifications Parameters Switching frequency Over load protection Over voltage protection Short circuit protection Protection class Operating temperature Maximum case temperature Storage temperature Temperature coefficient Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 65 150 Zener Diode Clamp Auto recovery Class II -40 to +70 Foldback See derating table KHz % oC 100 oC oC -45 to +95 ±0.02 % / oC Free air convection Non condensing 20 ~ 95 % RH Plastic (flammability to UL 94V-0) 70 g 2.22 x 1.21 x 0.99 inches 56.48 x 30.86 x 25.10mm > 400 000 hrs (MIL-HDBK -217F, t=+25oC)/Full Load > 100,000 hrs (MIL-HDBK -217F, t=at highest operating temperature)/Full Load Environment Approval Test Shock Vibration Parameters Wave form Acceleration amplitude Bump duration Converter operation Number of bumps Test mode Displacement Acceleration Conditions Half sine wave 5gn 30 ms before and after test, body mounted (on chassis) 18 (3 in each direction for every axis) Sweep sine 1mm 3g 10-100Hz, speed 0.05Hz/s Converter operation www.aimtec.com F 052e R8.V Tel: +1 514 620 2722 2 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter Safety Specifications Parameters Agency approvals cULus, CE, CB Medical Electrical Equipment Information technology Equipment EMI - Conducted and radiated emission Harmonic Current Emissions Voltage fluctuations and flicker Electrostatic Discharge Immunity RF, Electromagnetic Field Immunity Electrical Fast Transient/Burst Immunity Surge Immunity RF, Conducted Disturbance Immunity Power frequency Magnetic Field Immunity Voltage dips, Short Interruptions Immunity Information Technology Equipment Information Technology Equipment Standards IEC\EN\UL 60601-1, 2 x MOOP, CSA-C22.2 No. 601.1-M90 EN 60950-1:2006+A11:2009 EN55011, class B IEC/EN 61000-3-2, Class A IEC/EN 61000-3-3, (EN60555-3) IEC 61000-4-2 Level 3 IEC 61000-4-3 Level 2 IEC 61000-4-4 Level 2 IEC 61000-4-5 Level 3 IEC 61000-4-6 Level 2 IEC 61000-4-8 IEC 61000-4-11 UL 60950-1:2007 CAN/CSA-C22.2 No.60950-1-07 Additional Surge Protective Circuitry The AMEL20-MAZ series design level surge protection is certified to IEC 61000-4-5 surge Line to Line of 1KV. However greater protection can be enhanced by adding protective devices to ingress circuitry. For example, by adding an MOV (Metal Oxide Varistor) device example TVR10471KSY to the N / L input lines 2KV surge protection or greater, can be achieved. MOV PN Vrms V Vdc V Wmax (2ms) J Pmax W TVR10471KSY 300 385 70 0.4 Pin Out Specifications Pin Single Dual positive Dual negative/positive 1 2 3 4 5 AC Input (N) AC Input (L) +V Output -V Output No pin AC Input (N) AC Input (L) +V1 Output Common +V2 Output AC Input (N) AC Input (L) +V1 Output Common -V2 Output www.aimtec.com F 052e R8.V Tel: +1 514 620 2722 3 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter Dimensions 56.46 (2.22) 45.72 (1.80) 3 1 4 3 1 4 2 5 5.37 (0.21) 2 5.37 (0.21) 5 DIV: 10.00 (0.40) 5Ø 1.0 (Ø 0.04) Dimensions mm (inch) Case Tolerance ±0.50 (±0.02) Pin Diameter 1.0 ± 0.05 (0.04 ± 0.002) Pin Pitch Tolerance ±0.35 (±0.014) 1.05 (0.04) Output Power (%) Derating www.aimtec.com F 052e R8.V Tel: +1 514 620 2722 4 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter Output Power (%) Derating (Dual Output Models) www.aimtec.com F 052e R8.V Tel: +1 514 620 2722 5 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter Dimensions of Optional ST Mounting Plate Version 38.00 25.00 Pin Out Specification ST Version NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 052e R8.V Tel: +1 514 620 2722 6 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only