Astrodyne AHP1011-10 100w medical adapters for health care applications with pfc cispr-11 en55011 class b emission limits and are designed to Datasheet

medical medical
HPU101 series
100W
100W External Medical Grade Power Supply
The HPU101 series of AC/DC switching mode power supplies
provide 100 Watts of continuous output power . All supplies are
UL94V-1 min compliant. All models meet FCC Part-18 class B and
EN55011
and are
to n s
M e d i c aCISPR-11
l Adapt
ers class
f or BHemission
ealt hLimits
C are
Apdesigned
p lica tio
comply with ANSI/AAMI ES 60601-1: 2005(UL/cUL 3rd Edition), EN
60601-1:2006 (TUV/T-mark 3rd Edition) and new CE requirements.
All units are 100% burned in and tested.
FEATURES:
HPU101 series
AHP101
* Wide Operating Voltage, 90 to 260 VAC, 47 to 63 Hz
The HPU101
* IEC-320-C14
Inputseries
Inlet of AC/DC switching mode power supplies
with
PFC
provide
* Single
Output100 Watts of continuous output power . All supplies are
min Over
compliant.
All models meet FCC Part-18 class B and
* OverUL94V-1
Voltage and
Load protection
CISPR-11
class B emission
Limits and are designed to
* Medical
SafetyEN55011
3rd (IEC60601-1
3rd Edition)
comply
with
ANSI/AAMI
ES
60601-1:
2005(UL/cUL 3rd Edition), EN
to OutputInput
: 2MOPP
Wide* Input
90-260VAC
60601-1:2006
(TUV/T-mark
RoHS2 * Energy
Star 2.0, Efficiency
level V3rd Edition) and new CE requirements.
units are 100% burned in and tested.
2011/65/EU
* ClassAll
I system
series
Medical
Safety
IEC60601-1 3rd Edition; 2MOPP
* 3 year
warranty
medical
RoHS2
2011/65/EU
Class
I, 3 Prong Mains Input IEC320-C14
APPLICATIONS:
FE
*W
*I
*S
*O
*M
*I
*E
*C
*3
Home Healthcare Equipment
Over** Voltage
and Over Load Protection
63
AP
Patient Monitor
* Blood Pressure system
*H
HPU63B
series
of AC/DC switching mode power supplies
FEATU
Efficiency
Level
V devices
*The
Portable
medical
*P
63 Watts of continuous output power . All supplies are
*provide
ECG machine
* BO
* Wide
UL94V-1 min compliant. All models meet FCC Part-18 class B and
*P
Power
Factor
Correction
* IEC-32
GENERAL
SPECIFICATION:
CISPR-11 EN55011 class B emission Limits and are designed to
*E
* Single
with ANSI/AAMI
60601-1:
2005(UL/cUL 3rd Edition), EN
*comply
: Auto
Recovery
Short Circuit
ProtectionES
* Over V
3rd Edition) and new CE requirements.
GE
*60601-1:2006
Air Convection
Cooling: Free (TUV/T-mark
* Medic
units
are 100%
burned
in and tested.
APPROVALS:
*All
: UL94V-1
Flammability
Rating
* St
* Input
* Protection Classes: Class I
*C
RoHS2 * Energy
EN 60601-1
P
60601-1:2006
* Safety: ANSI/AAMI ES 60601-1:2005(UL/cUL 3rd Edition), EN
2011/65/EU
* FII
* Class
(TUV/T-mark 3rd Edition)
*P
* 3 year
HPU63B series
APPROVALS:
CB
2.99”W x 5.75”L x1.69”H
EN 60601-1
IEC 60601-1
PS
E
S&E
CB
Electrical Characteristics:
Symbol
Model Number
AHP1011-05
AHP1011-06
AHP1011-07
AHP1011-08
AHP1011-09
AHP1011-10
AHP1011-11
Characteristic
Vins
Safety Approval Input Voltage Range
Vin
Input Operate Voltage Range
Detail to see Fig.1
Fi
PF
Po
Iil
Iih
Irl
Irh
Ik
Input Frequency 8.33
12VDC
Power Factor Correction
15VDC
6.66
Output Power Range
18VDC
5.55
Low Line Input Current
24VDC
4.16
High Line Input Current
30VDC
3.33
Low Line Input Inrush Current
36VDC
2.77
High Line Input Inrush Current
48VDC
2.08 Current
Safety Ground Leakage
Efficiency
△Voi
Line Regulation
OVP
Over Voltage Protection
OLP
Over Load Protection
ttr
Time of Transient Response
thu
Hold-Up Time
ts
Start-up time
Ris
Insulation Resistance
Tc
Temperature Coefficient
HV
Dielectric Withstanding Voltage (P-S)
Vpg
Dielectric Withstanding Voltage (P-G)
EMI
EMC Emission
Environmental:
Symbol
Characteristic
To
Operating Temperature
Ts
Storage Temperature
Ho
Operating Humidity
Hs
Storage Humidity
Vsg
Surge Voltage
Electro Static Discharge
ESDa
ESDc Electro Static Discharge
WWW.ASTRODYNETDI.COM
MTBF
Mean Time Between Failure
ELEV
Operating Altitude (Elevation)
VBR
Vibration
Min.
Condition
Electrical Characteristics:
Safety Approval & Specification in Label
Output Voltage Output Amps
S
E
IEC 60601-1
Efficiency
Sine
wave
81%
Total Symbol
Regulation
Vins
Output Connector
Characteristic
100
Safety Approval Input Voltage Range
±5%
5 Pin DIN
Input Operate Voltage Range
Vin
84%
±4%
5 Pin DIN
Input Frequency
Fi
See Rating Chart
87%
±4%
5 Pin DIN
Power Factor Correction
PF
Full Load, Vin=100VAC
87%
±4% Po
Coax
Output Power
Range
Full Load, Vin=240VAC
87%
±3% Iil
Coax
Low Line Input Current
Full Load, 25°C, Cool start,APPROVALS:
Vin=100VAC
87%
±3% Iih
CoaxCurrent
High
Line Input
Full Load, 25°C, Cool start, Vin=240VAC
87%
±3%
Coax
Low
Line
Input
Inrush Current
Irl
Vin=240VAC, Fi=60Hz
CB
EN 60601-1
IEC 60601-1
High Chart
Line Input Inrush Current
Full Load, Vin=230VAC, Detail Irh
to see Rating
Safety
Ground Leakage Current
Full Load, Vin=100~120VAC
or Ik
200~240VAC
Electrical
Characteristics:
Efficiency
PS
E
S&E
*S
Typ. Max. Unit
(TU
240 VAC
APPLIC
90
260 Home
VAC
Safety Approval & *Specifica
47
63 * Patien
Hz
Detail to see Fig.1
0.95
1 * Blood
* Portab
Sine wave
100
W
* ECG m
1.2
A
See Rating Chart GENER
0.5
A
Full Load, Vin=100VAC
50 * Short
A C
* Coolin
Full Load, Vin=240VAC
120
A
* Flamm
Full Load, 25°C, Cool
start,
0.25* Protec
mA
Full Load, 25°C, Cool
start,
* Safety
See Rating Chart
Vin=240VAC, Fi=60Hz
%
0.5
1 (TUV/T-m
Full Load, Vin=230VAC, Det
112
132
%
Characteristic
Line
Regulation
Full
Load, Vin=100~120VAC
Recovers automatically after
condition
is removed
% i
150
Approval
Input Voltage Range Safety110
Approval & Specification
VinsfaultSafety
Over Voltage Protection
ms
Full Load, Vin=110VAC Vin OVP
4 linearly
Input Operate Voltage Range
Detail to see Fig.1 (Derate
Recovers automaticallyms
aft
OLP
Over
Load Protection
Full Load, Vin=100VAC Fi
16
Input Frequency
Sine wave
Time
of
Transient
Response
Full
Load,
Vin=110VAC
ttr
s
Full Load, Vin=100~240VAC
0.3 Chart
2
Output Power Range
See Rating
Po
Hold-Up
Time
Full
Load,
Vin=100VAC
thu
Primary to Secondary, 500VDC,25°XC/
70%
RH
50 Vin=100VAC
MΩ
Low Line Input Current
Full Load,
Iil
Start-up time
Full Load, Vin=100~240VAC
ts
%/°C
±0.04
All Condition
High
Line
Input
Current
Full
Load,
Vin=240VAC
Iih
Primary to Secondary, 500V
Ris <10mA
Insulation Resistance
Primary to Secondary, limit
VAC
Low Line Input Inrush Current
Full Load, 25°C, Cool4000
start, Vin=1
Irl current
Temperature
Coefficient
Tc
All
Condition 1500 VAC
Primary to PE, limit current
<10mA
High Line Input Inrush Current
Full Load, 25°C, Cool start, Vin=2
Irh
Dielectric Withstanding Voltage (P-S) Primary to Secondary, limit
HV EN61000-3-2,-3
Compliance to EN55011 (CISPR11),
B Vin=230VAC, Detail
Class
Full Load,
to
Efficiency
Dielectric Withstanding Voltage (P-G) Primary to PE, limit current
Vpg
Line Regulation
Full Load, Vin=100~120VAC or 20
△Voi
Compliance to EN55011 (C
EMC Emission
EMI
Over Voltage Protection
OVP
Min. Typ. Max. Unit
Condition
Symbol
△Voi
Environmental:
Over
Load
Protection
Detail to see Fig.2 (DerateOLP
linearly from
100%
load
at 40°C to 50% load at 70°C)
Symbol
Characteristic
Time
of
Transient
Response
ttr
10 ~ 95% RH
Operating
Temperature
To
Hold-Up
Time
thu
non-condensing
Storage
time Temperature
Ts Start-up
ts
See Rating Chart
Recovers
fau
-10 automatically
70after°C
Full Load,
Vin=110VAC
-40
85
°C
Detail
to see Fig.2 (Derate lin
Full Load,
0 Vin=100VAC
95% RH
100 ~ Vin=100~240VAC
95% RH 95% RH
Full Load,
Operating
Humidity
non-condensing
Coefficient
Tc Ho Temperature
All Condition
kV
2
All Condition
Storage
Humidity
SeetoRating
Chart limit curre
Primary
Secondary,
Dielectric
Withstanding
Voltage
(P-S)
Hs
HV
Air Discharge, IEC61000-4-2
8
kV
Compliance
to EN55011
(CISPR1
Surge Voltage
EMI VsgEMC Emission
ASTRODYNE USA: 1-800-823-8082
All Condition
Contact Discharge, IEC61000-4-2
6
kV
Electro
Discharge PACIFIC: 886-2-26983458
Air Discharge, IEC61000-4ASTRODYNE
ESDa
Operating Temperature at 25°C,
Calculated
per Static
MIL-HDBK-217F
100k
h
Contact Discharge, IEC6100
ESDc Electro Static Discharge
3000 m
All condition
Environmental:
Operating Temperature at
MTBF
Time
Failure
10 ~ 500Hz, 10min./1cycle,
60min.
eachMean
along
X, Y, ZBetween
axes
5
G
Symbol
Characteristic
ELEV Operating Altitude (Elevation)
All condition
100W M e d i c a l Adapt ers f or H ealt h C are Ap p lica tio n s with PFC
90-260 VAC (100-240 Nominal)
47-63 Hz
Low Line (100VAC)
1.2A max.
High Line (240VAC)
0.5A max.
0.5W
Low Line (100VAC)
50A max.
High Line (240VAC)
120A max.
0.25mA max.
0.95 min.
Class I
OUTPUT SPECIFICATIONS
Voltage and Current
Output Power Range
Load Regulation (Note 2)
Line Regulation (Note 1)
Over Load Protection*
Over Voltage Protection*
Short Circuit Protection
Transient Response
Temperature Coefficient
Ripple/Noise (Note 3)
Start Up / Hold Up Time
See Selection Chart
0 to FL Rating, 100W max.
± 5%, max. (0-FL, 230Vin)
± 1%, max., FL
110-150%, Auto Recovery
112-132%
Auto Recovery
110Vin, FL to 1/2L
4mS
±0.04%/°C, typ
100mV p-p
100Vin, FL
2S max. / 16mS min.
Size
Construction
Weight
Output Connector
Flammability Rating
5.75” x 2.99” x 1.69”
(146 x 76 x 43mm)
Desktop Style
23.63oz (670g)
See Selection Chart
UL94V-1
ENVIRONMENTAL SPECIFICATIONS
Oper. Temperature
Cooling
Storage Temperature
Operating/Storage Humidity
EMC
MTBF (MIL-HDBK-217F)
Surge Voltage
ESD - Air
ESD - Contact
Operating Altitude (Elevation)
Vibration
-10 to +40°C (FL) *
50% Load @ 70°C
(See Derate Curve Last Page)
Free Air Convection
-40 to +85°C, 10~95% RH *
0% to 95%, non-cond *
Compliance to EN55011 (CISPR11),
EN61000-3-2, -3 Class B
100,000 Hrs
2kV
IEC61000-4-2, 8kV
IEC61000-4-2, 6kV
3000m
5G, 10 ~ 500Hz, 10min./1cycle,
60min. each along X, Y, Z axes
NOTES
GENERAL SPECIFICATIONS
Input-Out Isolation
Input-GND Isolation
Isolation Resistance
Efficiency (FL, Nom. Vin)
Safety
series
PHYSICAL SPECIFICATIONS
INPUT SPECIFICATIONS
Input Voltage Range
Frequency Range (Sine Wave)
Input Current
No Load Power Consumption
Inrush Current, typ (Cold Start)
Leakage Current (240Vin, 60hHz)
Power Factor Correction
Protection Class
AHP101
4000 VAC
1500 VAC
50MΩ, 500VDC,25°XC/ 70% RH
See Selection Chart
ANSI/AAMI ES 60601-1:2005
(UL/cUL 3rd Edition),
EN 60601-1:2006
(TUV/T-mark 3rd Edition)
All specifications are typical at nominal input, full load, and 25°C unless otherwise noted
WWW.ASTRODYNETDI.COM
1. Line regulation is defined by changing ±10% of input voltage from
nominal line at rated load.
2. Load regulation is defined by changing ±40% of measured output
load from 60% rated load.
3. Ripple & noise is measured by using 20MHz bandwidth limited
oscilloscope and terminated each output with a 0.47uF capacitor at
rated load and nominal line.
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
oscilloscope and terminated each output with a 0.47uF capacitor at
rated load and nominal line.
6. Hold up time is measured from the end of the last charging pulse to the
time which the main output drops down to low limit of main output at
rated load and nominal line.
7. Efficiency is measured at rated load, and nominal line.
8. The specifics for testing the energy efficiency of this Series are outlined
in a separate document titled "Test Method for Calculating the Energy
Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power
Supplies (August 11, 2004)," which is available on the ENERGY STAR
Website.
50
80
100
120
140
160
180
200
220
INPUT VOLTAGE (VAC)
(FIG.1) INPUT VOLTAGE DERATING CURVE
240
260
280
110
100
90
80
70
60
AHP101
50
40
100W M e d i c a l Adapt ers f or H ealt h C are Ap p lica tio n s with PFC
30
20
series
10
MECHANICAL DIMENSIONS
0
-10
20
30
40
0
10
DC OUTPUT
CONNECTIONS
TEMPERATURE (°C)
Coaxial Plug
Dimensions are in mm (inches)
MECHANICAL DIMENSIONS: ( UNIT: mm )
50
60
70
80
(FIG.2) TEMPERATURE DERATING CURVE
OUTPUT CABLE RECOMMEND :
5.5mmoutput
outer diameter
1. Selected
connectors and wire, please refer to Appendix.
-Vout
+Vout
2.1mm
diameter,tofemale
2. This
seriesinner
is required
use AWG#18x3C+ AWG#16x3C/4FT output cable.
11mm
length,
center
“+”
3. The regulation and efficiency will be changed by modified output cable.
PACKING :
1. Net weight: 490~670g approx.
1. COM
2. Optional output connectors available contact
2. COMsales for details.
5 Pin DIN
1
3. Vout
4. COM
5. Vout
Shell = GND
3
4
2
5
Output Cord Length is 48” and uses AWG#18x3C + AWG#16x3C Cables
Modify the Output Cord will effect Regulation and Efficiency
Rating Chart:
Typ. Efficiency
No Load
Consumption
Hold-Up Time
(%)
(%)
(W)
(ms)
100
±5
81
0.5
16
OLP
100
±4
84
0.5
16
OLP
100
100
±4
87
0.5
16
OLP
4.76
100
100
±4
87
0.5
16
OLP
3.70
280
100
100
±3
87
0.5
16
OLP
100
±3
87
0.5
16
OLP
100
±3
87
0.5
16
OLP
(VDC)
(VDC)
(A)
(A)
(W)
80
HPU101-105
11.0
13.0
7.69
9.09
100
HPU101-106
70
13.0
16.0
6.25
7.69
100
HPU101-107
16.0
21.0
4.76
6.25
21.0
27.0
3.70
33.0
180
3.03
220
40.0
2.50
3.03
100
48.0
2.08
2.50
100
Voltage Range
110
(Based on the output volt.)
MODEL NO.
100
LOAD (%)
90
60
HPU101-108
50
HPU101-109
80
100
min
max
min
max
27.0 140
120
HPU101-110
33.0
110
HPU101-111
40.0
100
160
200
INPUT VOLTAGE (VAC)
(FIG.1) INPUT VOLTAGE DERATING CURVE
240
260
Protection Mode
Total Regulation
(mVp-p)
Maximum
Output Power
Ripple & Noise
DERATE
CURVESMedical Grade PowerOutput
100W
External
Supply
Current
90
80
70
60
50
40
30
20
10
0
-10
0
10
20
30
40
50
TEMPERATURE (°C)
(FIG.2) TEMPERATURE DERATING CURVE
60
70
80
OUTPUT CABLE RECOMMEND :
1. Selected output connectors and wire, please refer to Appendix.
2. This series is required to use AWG#18x3C+ AWG#16x3C/4FT output cable.
3. The regulation and efficiency will be changed by modified output cable.
PACKING :
1. Net weight: 490~670g approx.
2. Optional output connectors available contact sales for details.
WWW.ASTRODYNETDI.COM
0315
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
Similar pages