TM EV8007-V-00C IEEE 802.3af PoE PD Interface with 13W Primary-side Regulated Flyback Converter The Future of Analog IC Technology TM DESCRIPTION FEATURES EV8007-V-00C Evaluation Board is designed to demonstrate the capability of MP8007`s primary-side regulate fly-back function. This board supports IEEE 802.3af PoE compliant Powered Device with PD interface and flyback power converter. It is targeted for isolated 13W PoE application. The PD interface has all the functions of IEEE 802.3af, including detection, classification, inrush current, operation current limit as well as 100V Hot-swap MOSFET. The DCDC converter uses fixed peak current and variable frequency discontinuous conduction mode (DCM) to regulate constant output voltage. The MP8007 is available (4mmX5mm ) package. in QFN-28 ELECTRICAL SPECIFICATIONS Parameter Input voltage Adapter Voltage Output voltage Output current Symbol Value Units VIN 37-57 V VADAPTOR 24 V VOUT 12 V IOUT (1) A 1 Primary-side Regulate Flyback without Opto-coupler Feedback Integrated 180V Switching Power MOSFET Internal 80V Startup Circuit Up to 3A Programmable Current Limit Discontinuous Conduction Work Mode Include OLP, OVP, Open Circuit and Thermal Protection Minimal External Components Count Available in QFN-28 4mmx5mm Package APPLICATIONS Security Camera VoIP Phones WLAN Access Points General Flyback Converter All MPS parts are lead-free, halogen free, and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc. Notes: (1) When using 24V adapter input, the maximum output current will be lower than 1A, it is limited by transformer design. EV8007-V-00C EVALUATION BOARD 100 90 TBD 80 70 60 50 40 (L x W x H) (11.5cm x 4.5cm x 1.5cm) Board Number EV8007-V-00C MPS IC Number MP8007 30 20 10 0 10 100 1000 EV8007-V-00C Rev. 1.0 www.MonolithicPower.com 7/1/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 1 TM EV8007-V-00C—PRIMARY-SIDE REGULATE FLYBACK CONVERTER EVB AGND FB2 VDD GND RTN SMAJ58A 2 1 EVALUATION BOARD SCHEMATIC EV8007-V-00C Rev. 1.0 www.MonolithicPower.com 7/1/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 2 TM EV8007-V-00C—PRIMARY-SIDE REGULATE FLYBACK CONVERTER EVB EV8007-V-00C BILL OF MATERIALS Qty Ref Value 1 C1A 47μF 2 2 C1B,C1 C C2A,C2 B 2.2μF 22μF Ceramic Cap.,25V,X7R Package Manufacturer Part Number DIP JiangHai 47μF/100V 1210 MuRata GRM32ER72A225KA35L 1210 MuRata GRM32ER71E226KE15L DIP JiangHai 220μF/25V 1μF 220μF 25V CD284 ECap,8X12.5mm Ceramic Cap,10V,X7R 0603 MuRata GRM188R71A105KA61D 10nF Ceramic Cap,100V,X7R 0805 MuRata GRM216R72A103KA01D 1206 MuRata GRM319R72A104KA01D 0603 MuRata GRM188R72A102KA01D 1808 MuRata GR442QR73D102KW01L 0603 0603 0603 1206 0603 0603 0603 0603 0805 0603 ROYAL ROYAL ROYAL ROYAL ROYAL ROYAL ROYAL ROYAL ROYAL ROYAL RC0603FR-0749K9L RC0603FR-0720KL RC0603FR-0752K3L RC1206FR-0710KL RC0603FR-0724K9L RC0603FR-0741R2L RC0603FR-073KL RC0603JR-077K5L RC0805FR-0720RL RC0603FR-071KL Diodes SBR8U60P5 SOD-123 Diodes BAV21W-7-F SMA SOD-123 DO-214AC Little fuse Diodes VISHAY SOD-323 Diodes 1N4148WS-7 SOD-123 Diodes BZT52C15 SMD Wurth 749020011A 1 C2C 220μF 1 C3 C4,C5A, C5B 3 Description 47μF 100V CD284 ECap. 10X12.5mm Ceramic Cap, 100V, X7R 1 C5C 0.1μF 1 C6 1nF 1 C7 1nF 1 1 1 1 1 1 1 1 1 1 0 R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 49.9k 20k 52.3k 10k 24.9k 41.2 3k 7.5k 20 1k NC 1 D1 1 D2 BAV21 1 1 1 D3 D4 D5 SMAJ58A BAT46W SS1H10 1 D6 1N4148 1 0 0 D7 D8 T1 BZT52C15 NC NC 1 T2 749020011A Ceramic Cap. 100V, X7R Ceramic Cap,100V,X7R Ceramic Cap. 2000V X7R Film Res,1% Film Res,1% Film Res,1% Film Res,1% Film Res,1% Film Res,1% Film Res,1% Film Res,5% Film Res,1% Film Res,1% SBR8U60P5 8A 60V SUPER BARRIER RECTIFIER Switching Diode 200V 200mW TVS 100V, DIODE 100V, SCHOTTKY Switching Diode 75V 250mW Zener Diode, 15V LAN-Transformer WELAN POWERDI 5 SMAJ58A BAT46W-7-F SS1H10-E3/61T EV8007-V-00C Rev. 1.0 www.MonolithicPower.com 7/1/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 3 TM EV8007-V-00C—PRIMARY-SIDE REGULATE FLYBACK CONVERTER EVB EV8007-V-00D BILL OF MATERIALS (continued) Qty 1 2 1 2 2 1 Ref Value Description Np:Ns:Na=20:9:5, T3 42.9uH Lp=42.9μH, Core=EP13 L1A,L1B 120 120mΩ@100MHz L2 10uH Isat=4.9A, Irms=4.9A RJ Jack / Signal Line J1,J2 RJ45-8N4-B EMI/RFI Filters 6 TRMN BRD/CBLE GRND 8 PIN Block Inductor CR1, 1.0A Surface Mount DF02S Glass Passivated Bridge CR2 Rectifier IEEE 802.3af MP8007 U1 Compatible PSR Flyback PD Device Package Manufacturer Part Number EP13 Coilcraft CX9629-AL 1206 Wurth Coilcraft 742792113 XAL5050-103MEC RJ45-TAB Tyco DF-S Diodes Inc QFN-28 MPS RJ45-8N4-B DF02S MP8007GV EV8007-V-00C Rev. 1.0 www.MonolithicPower.com 7/1/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 4 TM EV8007-V-00C—PRIMARY-SIDE REGULATE FLYBACK CONVERTER EVB EVB TEST RESULTS VIN=48V, VOUT=12V, IOUT=1A, TA=25ºC, unless otherwise noted. Efficiency vs. Load Regulation Load Current 100 90 0.4 0.3 VIN=48V 0.1 60 50 0.3 0.2 80 VIN=37V 70 VIN=57V VIN=37V 0.1 0 -0.1 30 20 -0.2 10 0 10 100 1000 LOAD CURRENT (mA) -0.3 0 IOUT=1A 0.2 VIN=48V 0 40 Line Regulation -0.1 VIN=57V IOUT=0.5A -0.2 200 400 600 800 1000 LOAD CURRENT (mA) -0.3 35 40 45 50 55 60 INPUT VOLTAGE (V) Case Temperature Rise 45 40 VIN=48 35 30 25 VIN=37 20 15 VIN=57 10 5 0 0 0.2 0.4 0.6 0.8 1 1.2 LOAD CURRENT (A) EV8007-V-00C Rev. 1.0 www.MonolithicPower.com 7/1/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 5 TM EV8007-V-00C—PRIMARY-SIDE REGULATE FLYBACK CONVERTER EVB EVB TEST RESULTS (continued) VIN=48V, VOUT=12V, IOUT=1A, TA=25ºC, unless otherwise noted. VOUT/AC 200mV/div. VOUT/AC 200mV/div. VIN 20V/div. VSW 50V/div. VIN 20V/div. VSW 50V/div. IPRI 2A/div. IPRI 2A/div. VOUT 10V/div. VOUT 10V/div. VOUT 10V/div. VIN 20V/div. VRTN 20V/div. VPG 20V/div. VIN 20V/div. VRTN 20V/div. VPG 20V/div. IPRI 2A/div. IPRI 2A/div. VOUT/AC 200mV/div. VIN 20V/div. VSW 50V/div. IPRI 2A/div. VOUT 10V/div. VIN 20V/div. VPG 5V/div. IPRI 2A/div. VOUT 5V/div. VOUT 5V/div. VIN 50V/div. VIN 50V/div. VPG 5V/div. VSW 50V/div. VSW 50V/div. IPRI 2A/div. IPRI 2A/div. IPRI 2A/div. VIN 20V/div. EV8007-V-00C Rev. 1.0 www.MonolithicPower.com 7/1/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 6 TM EV8007-V-00C—PRIMARY-SIDE REGULATE FLYBACK CONVERTER EVB EVB TEST RESULTS (continued) VIN=48V, VOUT=12V, IOUT=1A, TA=25ºC, unless otherwise noted. IOUT = 10mA IOUT = 1A VOUT 5V/div. VOUT 5V/div. VIN 50V/div. VIN 50V/div. VSW 50V/div. VSW 50V/div. IPRI 2A/div. IPRI 2A/div. VOUT/AC 200mV/div. IOUT 500mA/div. VOUT 5V/div. VIN 50V/div. VOUT/AC 1V/div. IOUT 500mA/div. VOUT 5V/div. VFB1 2V/div. VSW 50V/div. VSW 50V/div. IPRI 2A/div. IPRI 2A/div. VOUT 5V/div. VFB1 2V/div. VSW 50V/div. IPRI 2A/div. EV8007-V-00C Rev. 1.0 www.MonolithicPower.com 7/1/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 7 TM EV8007-V-00C—PRIMARY-SIDE REGULATE FLYBACK CONVERTER EVB PRINTED CIRCUIT BOARD LAYOUT Figure 1：Top Silk Layer Figure 2: Top Layer Figure 3: Bottom Layer EV8007-V-00C Rev. 1.0 www.MonolithicPower.com 7/1/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 8 TM EV8007-V-00C—PRIMARY-SIDE REGULATE FLYBACK CONVERTER EVB QUICK START GUIDE The output voltage of this board is set to 12V. The board layout accommodates most commonly used components. There are two methods to start MP8007. Method 1: 1. Connect Load to: a. Positive (+): VOUT b. Negative (–): VOGND 2. Plug the cable coming from the PSE into the Ethernet Jack J1. The board will automatically startup. Method 2: 1. Preset Power Supply to 40V ≤ VIN ≤ 57V. (It can work in 37V ≤ VIN ≤ 57V after power up.) 2. Turn Power Supply off. 3. Connect Power Supply terminals to: a. Positive (+): VDD b. Negative (–): VSS 4. Connect Load to: a. Positive (+): VOUT b. Negative (–): VOGND 5. Turn Power Supply on after making connections. 6. The MP8007 is enabled on the evaluation board once VDD is applied. 7. MP8007 can supply VCC through internal high voltage LDO, D6 and R10 can be removed to save BOM cost, while it may lead to about 0.2% efficiency decreasing. 8. To use adapter supply function, connect the adapter`s positive terminal to VDD and negative terminal to ADPGND, then turn on the adapter, the board will prior use adapter to supply itself. NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications. Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications. EV8007-V-00C Rev. 1.0 www.MonolithicPower.com 7/1/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. 9