SMD-Photodiode EPD-470-1-0.9 20.11.2007 rev. 04 Wavelength Type Technology Case Blue-Green SMD GaP SMD 1206 Description Narrow bandwidth and high spectral sensitivity in the bluish-green visible range (380…555 nm), compact design in standard SMD package allows for easy circuit board mounting and assembling of arrays all dimensions: mm all tolerances: ± 0,1 1,2 0,5 2 pad 1,15 x 1,0 cathode 1,2 Alarm systems, light barriers, special sensors for automotive industry 1,0 R 0, 3 1,6 Applications 3,2 Miscellaneous Parameters Tamb = 25°C, unless otherwise specified Parameter Test сonditions Symbol Value Unit A 0.62 mm² Temperature coefficient of ID TCID 5 %/K Operating temperature range Tamb -20 to +85 °C Storage temperature range Tstg -40 to +125 °C Typ Max Unit Active area Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Parameter Test conditions Symbol Min IR = 10 µA VR 5 Dark current VR = 5 V ID Peak sensitivity wavelength VR = 0 V λp Responsivity at λP VR = 0 V Sλ Sensitivity range at 1%1) VR = 0 V λmin, λmax Spectral bandwidth at 50% VR = 0 V ∆λ0.5 VR = 10 mV RSH Breakdown voltage1) Shunt resistance Noise equivalent power λ = 470 nm 460 V 5 30 pA 470 480 nm 0.3 A/W 385 565 100 70 NEP nm nm 100 GΩ -15 W/ Hz 4.4x10 13 λ = 470 nm D* Junction capacitance VR = 0 V CJ 150 pF Switching time (RL = 50 Ω) VR = 1 V tr, tf 200 ns Specific detectivity cm ⋅ Hz ⋅ W −1 1.8x10 1) for information only Labeling Type Lot N° Typ. Sλ [A/W] Quantity EPD-470-1-0.9 *Note: All measurements carried out withEPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 2 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 SMD-Photodiode EPD-470-1-0.9 20.11.2007 rev. 04 Relative Photo-current vs. ambient temperature 1,20 Typical Optical Responsivity (A/W) 0,1 rel. photo-current (arb. units) 1,15 0,01 1E-3 1,10 1,05 1,00 0,95 0,90 1E-4 350 400 450 500 Wavelength [nm] 550 600 0,85 20 30 40 50 60 70 80 90 100 Ambient temperature Tamb (°C) Dark current vs. ambient temperature Allowable soldering profile 400 VR = 5V 300 ID (pA) VR = 1V 200 100 0 20 40 60 80 100 120 Temperature Tamb (°C) We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 2 of 2 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545