ASL330 Wideband Linear Amplifier MMIC Features Description 16.4 dB Gain at 500 MHz The ASL330, a wideband linear amplifier MMIC, has a high linearity and low noise over a wide range of frequency 5 MHz to 2.6 GHz, being suitable for use in the fiber receiver, distribution amplifiers and drop amplifiers of CATV systems, and in the mobile wireless repeaters and BTS. The amplifier is available in a SOT89 package and passes through the stringent DC, RF, and reliability tests. 21 dBm P1dB at 500 MHz 41 dBm Output IP3 at 500 MHz 1.7 dB NF at 500 MHz 75 Input & Output Match Bandwidth 5 ~ 1200 MHz Single Supply +5 V ASL330 Package Style: SOT89 Typical Performance Application Circuit (Supply Voltage = +5 V, TA = +25 C, Z0 = 75 ) Parameters Units Typica Frequency MHz 5 50 500 860 1200 2200 Noise Figure dB 1.7 1.8 1.7 1.8 3.1 2.7 Gain dB 16.5 17.2 16.4 15.9 10.8 14.7 50 ~ 1000 MHz (Min. VSWR) S11 dB -12 -20 -20 -18 -12 -18 50 ~ 1200 MHz S22 dB -14 -18 -20 -17 -13 -11 Output P1dB dBm 20.0 21.0 21.0 19.5 21.5 20.0 5 ~ 200 MHz Output IP3 dBm 39.51) 41.02) 41.02) 37.02) 40.02) 39.52) 150 ~ 2200 MHz (SMATV) Output IP2 dBm 51 54 56 50 65 51 50 ~ 1000 MHz CSO5) dBc 66 CTB5) dBc 76 Current mA 105 Device Voltage V +5 1), 2), 3), 50 ~ 1000 MHz (Gain Flatness: 0.3 dB) (Push-Pull, 1:1 transformer) 50 ~ 1200 MHz (Push-Pull, 1:1 transformer) 1) OIP3 and OIP2 are measured with two tones at an output power of +8 dBm/tone separated by 1 MHz. 2) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 6 MHz. 3) OIP2 is measured at F1+F2 Frequency. 4) 160 channels, +20 dBmV per channel (measured at output). Product Specifications Parameters Units Min Typ. Testing Frequency MHz 500 Gain dB 16.4 S11 dB -20 S22 dB -20 Output IP3 dBm 41 Noise Figure dB 1.7 Output P1dB dBm 21 Current mA 105 Device Voltage V +5 Max Pin Configuration Absolute Maximum Ratings Parameters Rating Operating Case Temperature -40 to 85 C Storage Temperature -40 to 150 C Device Voltage +6 V Operating Junction Temperature Input RF Power (CW, 75 matched)* Thermal Resistance 1/10 Pin No. Function 1 RF IN +150 C 2 GND +18 dBm 43 C/W 3 RF OUT & Bias ASB Inc. [email protected] Tel: +82-42-528-7223 June 2017 ASL330 Wideband Linear Amplifier MMIC Outline Drawing Part No. Lot No. Symbols A L b b1 C D D1 E E1 e1 H S e ASL330 Pxxxx Dimensions (In mm) MIN NOM 1.40 1.50 0.89 1.04 0.36 0.42 0.41 0.47 0.38 0.40 4.40 4.50 1.40 1.60 3.64 --2.40 2.50 2.90 3.00 0.35 0.40 0.65 0.75 1.40 1.50 Pin No. Function 1 RF IN 2 GND 3 RF OUT & Bias MAX 1.60 1.20 0.48 0.53 0.43 4.60 1.75 4.25 2.60 3.10 0.45 0.85 1.60 Mounting Recommendation (In mm) Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of the lead pin 2 and exposed pad of the device for better RF and thermal performance, as shown in the drawing at the left side. ESD Classification & Moisture Sensitivity Level ESD Classification HBM Class 1B Voltage Level: 550 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260 C reflow 2/10 ASB Inc. [email protected] Tel: +82-42-528-7223 June 2017 ASL330 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT Gain Flatness (0.3 dB) CATV Frequency (MHz) 50 500 860 Noise Figure (dB) 1.8 1.8 2.1 Magnitude S21 (dB) 16.2 16.0 16.3 Magnitude S11 (dB) -14 -12 -14 Magnitude S22 (dB) -12 -15 -20 Output P1dB (dBm) 21.0 21.0 19.5 Output IP3 (dBm) 39 41 38 Output IP21),2) (dBm) 51 51 50 1) 50 ~ 1000 MHz 3) 66 3) CTB (dBc) 76 Supply Voltage (V) +5 Current (mA) 105 CSO (dBc) +5 V . 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 3) 160 channels, +20 dBmV per channel (measured at output), 6 MHz channel spacing. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=5 V C6=1 F C5=68 pF L3=220 nH (Coil Inductor) RF IN C1=100 pF C2=100 nF RF OUT ASL330 L2=5.6 nH L1=270 nH (Coil Inductor) C4=4.7 nF L4=68 nH C3=0.3 pF R1=240 S-parameters 25 20 S21 15 S - parameter [dB] 10 5 0 -5 -10 S11 -15 S22 -20 S12 -25 -30 0 100 200 300 500 600 700 800 900 1000 1100 Frequency [MHz] CSO & CTB 90 100 80 90 70 80 CTB (dBc) CSO (dBc) 400 60 70 50 60 40 50 30 40 0 100 200 300 400 500 600 700 800 900 1000 0 100 Frequency (MHz) 3/10 200 300 400 500 600 700 800 900 1000 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7223 June 2017 ASL330 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT Min. VSWR CATV Frequency (MHz) 50 500 860 Noise Figure (dB) 1.8 1.7 1.8 Magnitude S21 (dB) 17.2 16.4 15.9 Magnitude S11 (dB) -20 -20 -18 Magnitude S22 (dB) -18 -20 -17 Output P1dB (dBm) 21.0 21.0 19.5 Output IP3 (dBm) 41 41 37 Output IP21),2) (dBm) 54 56 50 1) 50 ~ 1000 MHz 3) 66 3) CTB (dBc) 76 Device Voltage (V) +5 Current (mA) 105 CSO (dBc) +5 V . 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 3) 160 channels, +20 dBmV per channel (measured at output). Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=5 V C5=1 F L3=390 nH (Coil Inductor) C1=470 pF RF IN L2=8.6 nH RF OUT ASL330 C2=4.7 nF L1=330 nH (Coil Inductor) C3=0.75 pF C4=0.3 pF S-parameters 25 20 S21 15 S - parameter [dB] 10 5 0 -5 -10 -15 S22 -20 S11 S12 -25 -30 0 100 200 300 500 600 700 800 900 1000 1100 Frequency [MHz] CSO & CTB 90 100 80 90 70 80 CTB (dBc) CSO (dBc) 400 60 70 50 60 40 50 30 40 0 100 200 300 400 500 600 700 800 900 1000 0 100 Frequency (MHz) 4/10 200 300 400 500 600 700 800 900 1000 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7223 June 2017 ASL330 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT CATV 50 ~ 1200 MHz Frequency (MHz) 50 500 1200 Noise Figure (dB) 2.0 2.2 2.4 Magnitude S21 (dB) 15.3 15.3 14.5 Magnitude S11 (dB) -12 -14 -13 Magnitude S22 (dB) -11 -15 -12 Output P1dB (dBm) 20.0 20.0 21.5 Output IP3 (dBm) 39.0 39.0 36.5 Output IP21),2) (dBm) 52 56 46 Device Voltage (V) +5 Current (mA) 105 1) +5 V . 1) OIP3 and OIP2 are measured with two tones at an output power of +6 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters 0 25 -5 20 S11 (dB) Gain (dB) -10 15 10 -15 -20 5 0 -25 -30 0 200 400 600 800 1000 1200 1400 0 200 400 600 800 1000 1200 1400 Frequency (MHz) Frequency (MHz) 0 -5 S22 (dB) -10 -15 -20 -25 0 200 400 600 800 1000 1200 1400 Frequency (MHz) 5/10 ASB Inc. [email protected] Tel: +82-42-528-7223 June 2017 ASL330 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT CATV 5 ~ 200 MHz Frequency (MHz) 5 50 200 Noise Figure (dB) 1.7 1.9 1.8 Magnitude S21 (dB) 16.5 16.5 16.5 Magnitude S11 (dB) -12 -16 -18 Magnitude S22 (dB) -14 -14 -16 Output P1dB (dBm) 20.0 21.0 21.0 Output IP3 (dBm) 39.5 39.5 43.0 Output IP21),2) (dBm) 51 55 55 Device Voltage (V) +5 Current (mA) 105 1) +5 V . 1) OIP3 and OIP2 are measured with two tones at an output power of +9 dBm/tone separated by 1 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic S-parameters 0 25 -5 20 S11 (dB) Gain (dB) -10 15 10 -15 -20 5 -25 -30 0 0 50 100 150 200 250 300 0 50 100 150 200 250 300 Frequency (MHz) Frequency (MHz) 0 -5 S22 (dB) -10 -15 -20 -25 -30 0 50 100 150 200 250 300 Frequency (MHz) 6/10 ASB Inc. [email protected] Tel: +82-42-528-7223 June 2017 ASL330 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT SMATV 150 ~ 2200 MHz Frequency (MHz) 150 1300 2200 Noise Figure (dB) 1.6 2.3 2.7 Magnitude S21 (dB) 16.4 15.3 14.7 Magnitude S11 (dB) -14 -9 -18 Magnitude S22 (dB) -18 -9 -11 Output P1dB (dBm) 21.5 18.0 20.0 Output IP3 (dBm) 42.0 38.0 39.5 Output IP21),2) (dBm) 55 38 51 Device Voltage (V) +5 Current (mA) 105 1) +5 V . 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=5 V C4=1 F L1=680 nH (Coil Inductor) RF IN C1=1 nF L2=2.7 nH C2=1 nF RF OUT ASL330 C3=0.75 pF 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters 10 5 -15 -20 0 -25 0 500 1000 1500 2000 2500 0 Frequency (MHz) 500 1000 1500 2000 2500 Frequency (MHz) 0 -5 S22 (dB) -10 -15 -20 -25 0 500 1000 1500 2000 2500 Frequency (MHz) 7/10 ASB Inc. [email protected] Tel: +82-42-528-7223 June 2017 ASL330 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT CATV Push-Pull 1 : 1 transformer Frequency (MHz) 50 500 860 Magnitude S21 (dB) 11.3 11.1 10.8 Magnitude S11 (dB) -18 -14 -17 Magnitude S22 (dB) -18 -14 -14 Output P1dB (dBm) 22.0 24.5 25.0 Output IP31) (dBm) 39.5 44.0 42.5 1),2) 66 66 62 50 ~ 1000 MHz Output IP2 Noise Figure (dB) (dBm) 3.0 2.9 3.0 +5 V Device Voltage (V) +5 Current (mA) 210 . 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Note: MABA-007159 1:1 impedance transformers are used. S-parameters 0 20 -5 15 S11 (dB) Gain (dB) -10 10 -15 -20 5 -25 0 -30 0 200 400 600 800 1000 0 200 400 600 800 1000 Frequency (MHz) Frequency (MHz) 0 -5 S22 (dB) -10 -15 -20 -25 -30 0 200 400 600 800 1000 Frequency (MHz) 8/10 ASB Inc. [email protected] Tel: +82-42-528-7223 June 2017 ASL330 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT CATV Push-Pull 1 : 1 transformer Frequency (MHz) 50 500 1200 Magnitude S21 (dB) 11.2 10.8 10.8 Magnitude S11 (dB) -15 -12 -12 Magnitude S22 (dB) -15 -12 -13 Output P1dB (dBm) 22.0 24.5 25.0 Output IP31) (dBm) 40.0 45.0 40.0 1),2) 65 73 65 50 ~ 1200 MHz Output IP2 Noise Figure (dB) (dBm) 2.8 2.8 3.1 +5 V Device Voltage (V) +5 Current (mA) 210 . 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Note: MABA-007159 1:1 impedance transformers are used. S-parameters 0 20 -5 15 S11 (dB) Gain (dB) -10 10 -15 -20 5 -25 0 -30 0 200 400 600 800 1000 1200 1400 0 200 400 600 800 1000 1200 1400 Frequency (MHz) Frequency (MHz) 0 -5 S22 (dB) -10 -15 -20 -25 -30 0 200 400 600 800 1000 1200 1400 Frequency (MHz) 9/10 ASB Inc. [email protected] Tel: +82-42-528-7223 June 2017 ASL330 Wideband Linear Amplifier MMIC Recommended Soldering Reflow Profile 260 C Ramp-up (3 C/sec) 20~40 sec Ramp-down (6 C/sec) 200 C 150 C 60~180 sec Copyright 2009-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no responsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of ASB. 10/10 ASB Inc. [email protected] Tel: +82-42-528-7223 June 2017