PRODUCT DATASHEET Strada series last update 21/9/2016 DETAILS Product Number CA13119_STRADA-SQ-A-T Family Strada Type Assembly Color clear Diameter 25 + 25 mm Height 9,1 mm Style square Optic Material PMMA Holder Material Fastening pin, tape, screw Status production ready ROHS Comliant Yes Date Updated 21/09/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XM-L Asymmetric degStreetligh... 93 % 0.300 - XM-L2 asymmetric degStreetligh... 94 % 0.700 - XP-L Asymmetric degStreetligh... 93 % 0.700 - XHP50 Asymmetric degStreetligh... 94 % 0.580 - XP-L2 Asymmetric degStreetligh... 93 % 0.640 - LUXEON M/MX Asymmetric degStreetligh... 93 % 0.300 - LUXEON T Asymmetric degStreetligh... 92 % 0.900 - LUXEON MZ asymmetric degStreetligh... 93 % 0.800 - LUXEON TX Asymmetric degStreetligh... 94 % 0.880 - LUXEON XR-M linear 1x3, 1x4, 1x5 Asymmetric degStreetligh... 94 % 0.540 - NS9x383 Asymmetric degStreetligh... 92 % 0.700 - NV4x144A Asymmetric degStreetligh... 93 % 0.580 - NVSxx19B/NVSxx19C sim: Asym sim: 90 % - - Duris S10 Asymmetric degStreetligh... 93 % - Streetligh... 0.580 June 14th 2017 3:59 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D Tape c/c Isometric view Bottom view 3 9.1 2 21.5 4 4 3 Detail A 25 1.05 Front view 2 2 Tolerances if not otherwise shown: According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. 25 According to DIN ISO 2768-2 Form and position: class L Top view Control for SPC marked dimensions. This drawing is our property. It can't be reproduced or communicated without our written agreement. 1 DRAWN BY as DATE Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE 25.9.2012 CHECKED BY DATE SIZE - DESIGNED BY DATE A4 vs - - D SCALE Mechanical drawing STRADA-SQ-A-T 1 PART NUMBER REV 001 2:1 WEIGHT 4,80 g SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.