All Dimensions are in mm c ABConnectors Ltd. This document and the information contained herein may not be copied, used or disclosed, in whole or in part, except with the prior written permission of AB CONNECTORS LTD., or if this document has been produced under a contract with another party as expressly authorised under that contract. It is supplied without liability for errors or omisions. DESCRIPTION OF LAST CHANGE ISSUED BY DATE ISSUE AG 21/04/2011 B ABAC.CDS.0011 PROJECTION DRAWING FOR QUOTATION PURPOSES ONLY. NOT TO BE WORKED TO. ISSUE: A BY: AG RN: N/A DATE: 19/04/2011 ISSUE: B BY: AG RN: N/A DATE: 19/04/2011 C B EXAMPLE PART NUMBER: ABAC 24 W 15 35 P N M12 JAM NUT STYLE C MIN C MAX 9 11 13 15 17 19 21 23 25 12.21 12.21 12.32 12.32 12.21 12.01 13.01 13.01 13.03 13.36 13.36 13.34 13.34 13.36 13.16 14.16 14.16 14.16 ØA SHELL SIZE PRODUCT SERIES SHELL STYLE FINISH SHELL SIZE INSERT ARRANGEMENT CONTACT TYPE P = PIN CONTACTS S = SOCKET CONTACTS RESIN FILLED ORIENTATION MOD CODE M12 = REAR OF CONNECTOR RESIN FILLED FOR PANEL SEALING APPLICATIONS. CONTACTS SUPPLIED PER M09 (SHORT TAIL VERSION), REFER TO CONTACTS TABLE FOR TAIL DIMENSIONS. NOTES: 1. DIMENSIONS IN MILLIMETRES. 2. CONSULT FACTORY FOR REQUIREMENTS NOT LISTED. 3. REFER TO CATALOGUE OR MIL-DTL-38999 FOR PANEL CUT-OUT DETAILS. C B 4. MINIMUM SEALING CAPABILITY 10E -7 atm.cm 3 /s (He). SQUARE FLANGE STYLE C MIN C MAX 9 11 13 15 17 19 21 23 25 10.49 10.49 10.49 10.49 10.49 10.49 10.49 10.49 10.51 11.63 11.63 11.63 11.63 11.63 11.63 11.63 11.63 11.63 ØA SHELL SIZE 5. MAXIMUM SERVICE TEMPERATURE 150°C. CONTACTS CONTACT SIZE MOD CODE REF. 22D 20 16 M09 M09 M09 ØA B 0.70 0.70 1.15 4.00 5.10 5.10 RESIN FILLED Do not scale this drawing ∇ = CRITICAL CHARACTERISTIC ◊ = SIGNIFICANT CHARACTERISTIC (SEE AB-W07-03-01 FOR DESCRIPTION) GEOMETRIC TOLERANCE SYMBOLS MATERIAL: CHARACTERISTIC SYM CHARACTERISTIC STRAIGHTNESS ANGULARITY FLATNESS RUN OUT ROUNDNESS POSITION CYLINDRICITY CONCENTRICITY PROFILE OF A LINE SYMMETRY PROFILE OF A SURFACE M.M.C. PARALLELISM SQUARENESS FOR EXPLANATION OF DIMENSIONS. TOLERANCES. NOTES. ETC. SEE BS308 A2 SYM N/A TITLE: AB CONNECTORS LTD. TOLERANCES UNLESS OTHERWISE STATED ALL DECIMAL PLACES M ` 0.1 HOLE DIAMETERS ` 0.05 ANGULAR ` 2~ DRAWN A TT GROUP COMPANY FINISH: FIXED CONNECTOR WITH PC TAILS AND PANEL SEALING AG DATE CHKD 18/04/2011 PL THIS DRAWING MAY ONLY BE ALTERED IF THE PART REMAINS INTERCHANGEABLE. IF NOT , A NEW DRAWING NUMBER MUST BE TAKEN. PRODUCT DRAWING NUMBER ABAC.CDS.0011 FINISH CODE VARN