EPCOS B65814-N1008-D1 Rm 10 rm cores are supplied in set Datasheet

RM Cores
Series/Type:
RM 10
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
B65814N1011D001
B65814N1010D001
B65814N1012D001
B65814K1010D001
Date of
Withdrawal
2003-08-08
2003-08-08
Deadline Last
Orders
2004-02-29
2004-02-29
Last Shipments
2004-08-31
2004-08-31
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
RM 10
Core
B65813
■ In accordance with IEC 60431
■ Cores without center hole
for transformer applications
■ RM cores are supplied in sets
Magnetic characteristics (per set)
Σl/A
le
Ae
A min
Ve
with
center hole
without
center hole
0,5
42
83
—
3 470
0,45
44
98
90
4 310
mm–1
mm
mm2
mm2
mm3
22
g
Approx. weight (per set)
m
20,7
Gapped
Material
AL value
s
nH
approx.
mm
µe
Ordering code 1)
-D with center hole
-N with threaded sleeve
-J without center hole
N48
400 ± 3 %
630 ± 3 %
0,21
0,13
160
250
B65813-+400-A48
B65813-+630-A48
N41
250 ± 3 %
630 ± 5 %
1600 ± 10 %
0,44
0,13
0,04
90
226
573
B65813-J250-A41
B65813-J630-J41
B65813-J1600-K41
1) Replace the + by the code letter “D” or “N” for the required version.
236 08/01
RM 10
Core
B65813
Ungapped
Material
A L value
µe
nH
AL1min PV
Ordering code
nH
-J w/o center hole
W/set
N30
7600 + 30/– 20 % 2720
B65813-J-R30
T38
16000 + 40/– 30 % 5730
B65813-J-Y38
B65813-J-R49
N49
2900 + 30/– 20 % 1040 1680
< 0,75
(50 mT, 500 kHz,100 °C)
N87
4200 + 30/– 20 % 1500 2550
B65813-J-R87
< 2,30
(200 mT, 100 kHz, 100 °C)
N97 1)
4200 + 30/– 20 % 1500 2550
B65813-J-R97
< 2,00
(200 mT, 100 kHz, 100 °C)
N41
5500 + 30/– 20 % 1960 2550
< 0,80
(200 mT, 25 kHz, 100 °C)
1) Preliminary data
237 08/01
B65813-J-R41
RM 10
Accessories
B65814
Coil former
Material:
GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085:
H max. operating temperature 180 °C), color code black
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
Winding:
see “Processing Notes”, page 153
Squared pins. For matching clamp and insulating washers see page 240.
Sections
AN
mm2
lN
mm
A R value
µΩ
Pins
Ordering code
1
41,5
52
43
8
10
11
12
B65814-N1008-D1
B65814-N1010-D1
B65814-N1011-D1
B65814-N1012-D1
2
39
52
46
8
B65814-N1008-D2
12 pins
11
,1+
0,2
1,6
_0
,2
11 12
10
1
2
3
8 9
Pins omitted
8 pins
10 pins
11 pins
2, 5, 8, 11
2, 11
9
4
7
6
12,25 _ 0,2
0,65±0,05
Version
5
ø21_ 0,2
1±0,05
0,59±0,06
5,5±0,3
13,55 _ 0,2
ø12,5 _ 0,2
0,5
Hole arrangement
View in
mounting direction
2,54
ø1+0,1
_ 10
60
Erdungspunkte
ø1,3+0,1
Ground Ø 1,3+0,1
FRM0271-W
238 08/01
RM 10
Accessories
B65814
Coil former for power applications
Optimized for automatic winding
Material:
GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
Winding:
see “Processing Notes”, page 153
For matching clamp and insulating washer 1 see page 240
Sections
AN
mm2
lN
mm
A R value
µΩ
Pins
Ordering code
1
41,5
52
43
12
B65814-C1512-T1
Marking of pin 1
Ground Ø 1,3+0,1
Hole arrangement
View in mounting direction
(Note half pitch!)
239 08/01
RM 10
Accessories
B65814
Clamp
■ With ground terminal, made of stainless spring steel (tinned), 0,45 mm thick
■ Solderability to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
■ Also available as strip clamp on reels
Insulating washer 1 between core and coil former
■ For tolerance compensation and for insulation
■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E
120 °C), 0,1 mm thick
Insulating washer 2 for double-clad PCBs
■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E
120 °C), 0,3 mm thick
Ordering code
Clamp (ordering code per piece, 2 are required)
B65814-A2203
Insulating washer 1 (reel packing, PU = 1 reel)
B65814-B5000
Insulating washer 2 (bulk)
B65814-B2005
Clamp
_ 0,3
5,2 +0,1
15,1+0,3
0,9 _ 0,2
17+0,3
0,9 _ 0,2
4,8 max.
Insulating washer 1
0,7 x 0,45
FRM0259-D
Insulating washer 2
240 08/01
RM 10
B63399
Accessories
B65679
Adjusting screw
■ Tube core with thread and core brake made of GFR polyterephthalate
Plastic adjusting screwdriver (not shown)
Plastic handle for adjusting screwdriver (not shown)
Core RM 10
Material
N 48
Adjusting screw
Min.
adjusting
range
Ordering code
AL value
nH
Tube core
∅ × length
mm
Material
Color
code
400
4,55 × 6,3
N 22
red
10
B65679-E3-X22
400
630
4,98 × 6,3
N 22
black
18
11
B65679-E2-X22
630
5,15 × 6,3
N 22
white
17
B65679-E1-X22
%
Adjusting screwdriver
B63399-B1
Handle
B63399-B5
Adjusting screw
241 08/01
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
 EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1
Similar pages