Abracon ABFT Frequency translator / jitter attenuator Datasheet

Frequency Translator / Jitter Attenuator
ABFT
Pb RoHS
Compliant
5.00 x 7.00 x 2.0mm
Moisture Sensitivity Level (MSL)–This product is not Moisture Sensitive MSL = N/A: Not Applicable
FEATURES:
| | | | | | | | | | | | | |
APPLICATIONS:
• Frequency translation, clock smoothing and jitter attenuation of the input
• 5x7x2 mm SMT, RoHS Compliant reflow-able package
• Frequency translation to either 20MHz or 40MHz carrier @ +3.3V Supply Voltage 10MHz reference
• Datacom - DSLAM, DSLAR, Access Nodes
• Industrial operating temperature range (-40ºC to +85ºC)
• Cable modem head end
• LVCMOS Output
• Base Station - GSM, CDMA
• Internal absolute pull range > ±100 ppm allowing for long term drift correction
• Telecom - SONET/SDH/ATM
GENERAL DESCRIPTION
The ABFT series is an Ultra Low Jitter VCXO based frequency translator; ideally suited to improve Jitter characteristics of the input signal. This device is
designed to provide input clock smoothing - while providing Phase and Frequency Locked higher frequency translated output.
Typical application will take a 10MHz reference frequency and phase & frequency lock it to either a 20MHz or a 40MHz Low Jitter VCXO. The implemented
technology significantly attenuates the jitter content of the 10MHz reference signal; while keeping the higher frequency RF Output - Frequency and Phase
Coherent with the input 10MHz reference signal.
STANDARD SPECIFICATIONS:
Parameters
Minimum
Resonant Frequency
Operating Temperature
Storage Temperature
Supply Voltage (Vdd)
-40
-40
3.135
Typical
20.000
Or
40.00
3.3
Maximum
Units
Notes
MHz
See options
+85
+85
3.465
°C
°C
V
10.000200
3.3
50
MHz
Vp-p
ms
+25.00
ppb
Input Signal Characteristics
Frequency
Signal level
Lock Time
Frequency Stability Over Temperature
(Note # 1)
Internal Frequency Pull Range
9.999800
0.300
Output Load:
Rise Time (Tr)
Fall Time (Tf)
Symmetry
Output Voltage ( VOH)
Output Voltage ( VOL)
Stand alone Aging (Note # 2)
10.000000
< 20
-25.00
±100.00
Supply Current (IDD)
RF output Characteristics
45
0.9*Vdd
ppm
< 14.0
20.00
mA
853
526
48/52
15||10
1200
1200
55
pF||kΩ
ps
ps
%
V
V
0.1*Vdd
-5.0
+5.0
-12.0
+12.0
ppm
3.3V±5%
Input signal must be
with-in ±20.00 ppm
from 10.00MHz
carrier for the ABFT
device to achieve lock
Referenced to the
stable input reference
of 10.00MHz (such as
a Stratum-III TCXO
or an OCXO)
This is the internal
pull range of the
ABFT device
providing sufficient
correction range to
account for internal
aging, stand-alone
temperature variation,
etc.
Under Lock
@1/2Vdd
@+25°C First year
@+25°C After 10
years
(Note # 1):The frequency stability over temperature of the ABFT device is greatly dependant on the short term perturbations of the input reference signal.
(Note # 2):The Aging characteristics of the Quartz used inside the ABFT solution are such that, the stand-alone aging will not exceed ±12.00 ppm over a
10-year product life; referenced to the initial measured frequency post reflow in end application
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
|
Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Frequency Translator / Jitter Attenuator
ABFT
Pb RoHS
Compliant
5.00 x 7.00 x 2.0mm
| | | | | | | | | | | | | |
Parameters
Minimum
Typical
Maximum
-56
-87
-113
-135
-151
-155
-156
-157
-130
-145
-150
-150
-155
Units
Phase Noise @ 20MHz carrier
1Hz offset from the carrier
10Hz offset from the carrier
100Hz offset from the carrier
1,000Hz offset from the carrier
10,000Hz offset from the carrier
100,000Hz offset from the carrier
1,000,000Hz offset from the carrier
5,000,000Hz offset from the carrier
dBc/Hz
Notes
Close to the carrier
phase noise is
dependent on the
cleanliness of the
input reference.
However, at 1kHz
offset and beyond,
ABFT phase noise is
practically
independent of the
input reference noise
PHASE NOISE
Phase Noise under lock (ABFT-20.00MHz with input connected to a
low noise,stable 10.00MHz Stratum-IIIreference signal)
DetailedComparative Phase Noise Plot
(Stratum-III 10.0MHz as Reference)
Stratum-III 10.00MHz low Noise Reference
ABFT-20.00MHz Phase Noise under Lock
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
|
Frequency Translator / Jitter Attenuator
ABFT
Pb RoHS
Compliant
5.00 x 7.00 x 2.0mm
| | | | | | | | | | | | | |
PHASE NOISE
Detailed Comparative Phase Noise Plot
(10.0MHz Clock Crystal Oscillator as Reference)
Detail Comparative Phase Noise Plot
(10.0MHz MEMS Oscillator as Reference)
10.00MHz Clock Crystal Oscillator Reference
ABFT-20.00MHz Phase Noise under Lock
10.00MHz MEMS Oscillator Reference
ABFT-20.00MHz Phase Noise under Lock
FREQUENCY TRACKING OVER TEMPERATURE
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
|
Frequency Translator / Jitter Attenuator
ABFT
Pb RoHS
Compliant
5.00 x 7.00 x 2.0mm
| | | | | | | | | | | | | |
PART IDENTIFICATION
ABFT -
MHz -
Frequency in MHz
20.000 MHz
Or
40.000 MHz
T
T2
=
=
1,000 unit Reel
(250) unit Reel
FREQUENCY TRACKING OVER TEMPERATURE
Top View
(5.0 ± 0.2) mm
(7.0 ± 0.2) mm
Side View
2.0 mm Max
Dimension : Inches
(mm)
Bottom View
(5.08 ± 0.20) mm
Pin #1
PIN #
1
2
3
4
Pin#2
1.1 mm
Pin #4
Note:Abracon recommendsa0.01uF bypass capacitor between pin#2 andpin#4
Pin#3
1.4 mm
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
Name
10.0MHz Reference Input
GND
Locked - Output
Vdd
ALL Dimensions are in (mm)
Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
|
Frequency Translator / Jitter Attenuator
ABFT
Pb RoHS
Compliant
5.00 x 7.00 x 2.0mm
| | | | | | | | | | | | | |
REFLOW PROFILE
REFLOW PROFILE
T = Tape & Reel { (1,000) units / reel }
T2 = Tape & Reel { (250) units / reel }
Dimensions: mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
|
Similar pages