Purdy AND-TFT-35PA-4HB-KIT Lcd color monitor Datasheet

AND-TFT-35PA-4HB-KIT
3.5" TFT LCD
LCD Color Monitor
The AND-TFT-35PA-4HB-KIT is a compact full color TFT
LCD module, that is suitable for camcorder, digital camera
applications and other electronic products which require high
quality flat panel displays. This device consists of a twisted
nematic (TN) liquid crystal cell, that incorporates a TFT-array
that has 160 x 234 pixels on a 3.5 inch diagonal screen, X
and Y drivers, an LSI controller, and a built-in U-shape CCFL
backlight. Sunlight readable, 1500 cd/m2 brightness and antiglare screen.
Mechanical Characteristics
Item
Specification
Unit
Screen Size
3.5 inch diagonal
inch
Outline
Dimensions
83.7 (W) x 68.6 (H) x 9.0 (D)
mm
Part List:
Active Area
72.0W)x 50.54(H)
mm
• AND-TFT-35PA-4HB, Color Display
Input Signal
NTSC/PAL
–
• PC-TFT-35PA, NTSC/PAL controller
Pixel Number
(RGB trio)
160 (W) x 234 (H)
–
Sub Pixel
Arrangement
0.150 (W) x 0.216 (H)
–
Dot Pitch
0.149 (W) x 0.225 (H)
mm
80
g
• PC-Demo, User interface board
• 14 wire interface cable
• Built-in CCFL inverter
• AC/DC Power supply
Weight
• RoHS compliant
Absolute Maximum Rating
Item
for Source
Driver
Supply
Voltage
for Gate
Driver
Symbol
Conditions
Absolute Maximum Rating
Min.
Max.
Unit
Analog
AVDD
-0.3
+7.0
Digital
VDD
-0.3
+7.0
Positive
VGH
-0.3
+45
Negative
VGL
-.23
+0.3
VGH - VGL
+15
+40
VVIDEO
-0.3
+7.3
V
–
0
+60
°C
Analog Input Voltage
( means VR, VG, VB )
Ta = 25°C
V
Operating Temperature
(define that contrast, response time, other display optical
characters are Ta=+25)
Top
Storage Temperature
Tstg
–
-20
+70
°C
–
60°C
–
95%
RH
Humidity (No condensation of water)
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
7/28/07
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
1
AND-TFT-35PA-4HB-KIT
Power Consumption
Specifications
Typ.
Max.
33.5
–
Symbol
Remarks
–
CCFL Current
–
IL
Min.
–
–
–
5.0
–
mA
CCFL Starting Voltage
VL
–
–
665.0
–
V
Backlight Power Consumption
PL
–
–
2.4
–
W
Min.
Specifications
Typ.
Max.
VCC
+4.5
+5.0
+5.5
Item
LCD Panel Power Consumption
Units
mW
(Ta =25°C)
Backlight Connector
JST BHR-03VS-2
Recommended Operating Conditions
Symbol
Item
Power Supply
(Ta = 25°C)
Video Signal (VR, VG, VB)
VCOM
Remarks
VDD
+3.0
+3.3
+3.6
AVDD
+4.5
+5.0
+5.5
VGH
+15.0
+17.0
+19.0
VEE
Unit
V
-15.5
-15.0
-14.5
VGL AC
AC Component of VGL
–
+6.0
–
VP-P
VGL DC
DC Component of VGL
-13.0
-12.0
-10.5
V
Vi AC
AC Component
–
+4.0
+4.2
VP-P
–
+2.5
–
V
Vi DC
DC Component
VCOM AC
AC Component of VCOMM
–
+6.0
–
VP-P
VCOM DC
DC Component of VCOMM
–
TBD
–
V
+0.7 VDD
–
–
–
–
+0.3 VDD
H Level
VIH
L Level
VIL
Note 1
Note 1: STH1, STH2, CPH1, CPH2, CPH3, Q2H, INH, CPV, XOE,
V
DIO1, DIO2
Optical Specifications
Item
Conditions
θ
θ (to 12 o’clock)
θ (to 6 o’clock)
CR≥ 10
CR
At optimized viewing angle
200
350
–
Rise
Tr
Fall
Ratio
Tf
T
U
θ =0°
φ =0°
–
–
–
–
8.5
65
15
25
9.0
70
30
50
9.5
–
–
200
1500
–
0.280
0.310
66.50
10,000
0.310
0.340
68.50
–
0.340
0.370
70.50
–
Horizontal
Viewing Angle
Specifications
Typ.
Max.
± 60
–
45
–
45
–
Symbol
Vertical
Min.
± 45
10
30
Unit
deg
Contrast Ratio
Luminance when LCD is White
Luminance when LCD is Black
Response Time
Transmission
Uniformity
Brightness
LUM
White Chromaticity
Lamp Life Time
2
+25°C
X
Y
Tc
–
θ =0°
–
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
–
ms
%
–
cd/m2
–
hr
7/28/07
AND-TFT-35PA-4HB-KIT
Interface Pin Assignment
Symbol
Function
Pin No.
STH1
1
Start pulse for source driver
Input/Output
Input/Output
2
AVSS
Analog GND for source driver
Input
3
AVDD
Analog power input for source driver
Input
4
VB
Video Input B
Input
5
VG
Video Input G
Input
6
VR
Video Input R
Input
7
VSS
Digital GND
Input
8
VDD
Digital power input
Input
9
10
CPH1
CPH2
Sampling and shift clock for source driver
Sampling and shift clock for source driver
Input
Input
11
CPH3
STH2
Sampling and shift clock for source driver
12
13
Q2H
Video input rotation control
Input
14
15
Output enable for source driver
Left/Right Control for source driver
Input
Input
16
INH
R/L
VCOM
Common electrode voltage
Input
17
VCOM
Common electrode voltage
Input
18
19
Output enable for gate driver
Clock input for gate driver
Input
Input
20
XOE
CPV
U/D
Up/Down Control for gate driver
Input
Start pulse for source driver
Remark
Note 1
AVDD= +5V (Typ..)
VCOM =6VPP
VDD =+3.3V (Typ..)
Input
Input/Output
Note 1
VCOM =6VPP
Note 1
21
DIO2
Vertical start pulse
Input/Output
22
DIO1
Vertical start pulse
Input/Output
23
VGL
Gate off voltage (alternative every 1-H)
Input
VCOM =6VPP
24
VEE
Gate driver negative voltage
Input
VEE = -15V (Typ..)
25
VSS
GND
Input
26
VCC
Logic power for gate driver
Input
VCC =+3.3V (Typ..)
27
VGH
Gate on voltage
Input
VGH = +17V (Typ..)
28
NC
No connection
–
Note 2
–
Note 1: STH1, STH2 and R/L mode
R/L
STH1
STH2
Remarks
High (VDD)
Input
Output
Left to Right
Low (0 Volt.)
Output
Input
Right to Left
Note 2: DIO1, DIO2 and U/D mode
7/28/07
U/D
DIO1
DIO2
Remarks
High (VDD)
Input
Output
Down to Up
Low (0 Volt.)
Output
Input
Up to Down
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
3
AND-TFT-35PA-4HB-KIT
Dimensional Outline
4
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
7/28/07
PC-TFT-35PA
PC-TFT-35PA
Interface Board
Features
The PC-TFT-35PA is designed to work with the
AND-TFT-35PA color TFT display which is
suitable for security, video game, door phone,
video phone, portable TV and instrument display
applications..
• Used for TFT-LCD display: 3.5” AND-TFT-35PA
• NTSC/PAL video input switch
• Requires only +12VD input
• DC/DC/DC/AC video decoder all-in-one
• Up/Down & Left/Right display reverse
Mechanical Characteristics
Item
Screen Size
Display Format
Specification
Unit
3.5 (diagonal)
inch
480 x 234
dot
71.6(H) x 52.65 (V)
mm
0.149 (W) x 0.225 (H)
mm
Pixel Configuration
Delta
–
Outline Dimension
87.3 (W) x 68.6 (H) x 6.6 (D)
mm
58
g
150:1
–
Active Area
Dot Pitch
Weight
Contrast Ratio
(V) +15° / -35°
View Angle
deg
(H) ± 50°
Color
Brightness
Absolute Maximum Rating
Item
Full Color
–
250
cd/m2
Symbol
Conditions
Min.
Max.
Unit
Operating Temperature
Top
–
0
60
°C
Storage Temperature
Tstg
–
-30
80
°C
7/28/07
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
5
PC-TFT-35PA
Electronic Characteristics
Symbol
Video
NTSC/PAL (75Ω)
Vin
DC (+)
Iin
Pin
DC (+6V)
Vo
DC (+)
Io
Bright
Contrast I
Color
Tint
NTSC/PAL
Left/Right
Up/Down
–
Conditions
Input/Output
Input
Input
DC (+)
DC (+)
DC (+)
DC (+) NTSC only
(Option)
Operating Temperature
Output
Input
Input
Input
Input
Input
Input
Input
–
Min.
Typ.
Max.
Unit
–
1
–
V
10
12
14
V
–
220
–
mA
–
2.64
–
W
–
5
–
V
–
1.6
1.6
0.6
1.4
–
–
–
0
2
2.2
1.8
1.4
1.9
TTL
TTL
TTL
–
–
2.5
2.5
1.8
2.4
–
–
–
60
mA
V
V
V
V
°C
Block Diagram
6
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
7/28/07
PC-TFT-35PA
Dimensional Outline
NOTE: General tolerance is ± 0.50
Unit: mm
7/28/07
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
7
PC-TFT-35PA
J201: LCD Panel I/O erminals (FPC 28-pin below contact type.)
Pin No.
Symbol
I/O
Description
1
STH1
I/O
2
AVSS
I
3
AVDD
I
Analog power input for source drive
4
VB
I
Video Input B
5
VG
I
Video Input G
6
VR
I
Video Input R
Start pulse for source driver
Analog GND for source driver
7
VSS
I
Digital GND
8
VDD
–
Digital power input
9
CPH1
I
Sampling and shift clock for source driver
10
CPH2
I
Sampling and shift clock for source driver
11
CPH3
I
12
STH2
I/O
Start pulse for source driver
13
Q2H
I
Video input rotation control
14
INH
I
Output enable for source driver
Sampling and shift clock for source driver
15
R/L
I
Left/Right Control for source driver
16
VCOM
I
Common electrode voltage
17
VCOM
I
Common electrode voltage
18
XOE
I
Output enable for gate driver
19
CPV
I
Clock input for gate driver
20
U/D
I
Up/Down Control for gate driver
21
DIO2
I/O
Vertical start pulse
22
DIO1
I/O
Vertical start pulse
23
VGL
I
Gate off voltage (alternative every 1-H)
24
VEE
I
Gate driver negative voltage
25
VSS
–
GND
26
Vcc
I
Logic power for gate driver
27
VGH
I
Gate on voltage
28
NC
–
No connection
Note: About TFT-LCD Panel detail information please refer to AND’s AND-TFT-35PA specification.
8
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
7/28/07
PC-DEMO-USER INTERFACE BOARD
PC-DEMO-USER INTERFACE BOARD
7/28/07
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
9
Similar pages